Despite the research that has been conducted on biogas production from different waste materials through the anaerobic digestion process, there are still limited studies on their application for thermal systems. This paper presents an energetic and exergetic analysis of a multigeneration system comprising a micro-gas turbine, an organic Rankine cycle (ORC), an absorption chiller, and a water heater. It uses energy from biogas combustion produced through anaerobic co-digestion of food and animal waste. The reported biogas yield from 3 different studies was used in designing the fuel input for the system. The results showed that substrate combination of poultry manure and food waste (Biogas-A) needs 35.07 tons of volatile solids (tons-VS/day) of waste compared to 33.11 tons-VS/day for Biogas-B (Cattle manure and food waste), and 81.87 tons-VS/day for Biogas-C (swine manure and corn straw). For an increase in the methane content from 40% to 60%, the substrate amounts were reduced by 42.3% for Biogas-A, 45.3% for Biogas-B, and 42.7% for Biogas-C. Likewise, for an increase in recuperator effectiveness from 65% to 95%, the substrate amounts reduced by 31.6% for Biogas-A, 30.3% for Biogas-B, and 31.4% for Biogas-C. Increasing the ambient temperature was shown to have an adverse effect on the performance of the system. The energy efficiency of the system reduced from 47.8% to 39.8% and the exergy efficiency reduced from 63% to 60% for an increase from 5 °C to 40 °C. The total exergy destruction of the system also increased from 1760 kW to 1885 kW. The results from this study will give an overview for future practical design for electricity production from waste and the choice of biomass materials to be utilized.
Some of the heavy metals, (arsenic, cadmium, chromium and nickel) tend to endanger public health, when found above critical limits in soil and water, becoming carcinogenic. The heavy metals are taken by humans through the food chain. As shown by numerous researchers all over the world, the heavy metal contamination mostly come from sewage waters and pesticides, as well as naturally. The natural resources come from the composition of the rock formations present at the area of study. One or all of the above mentioned sources of heavy metal contamination may be present. The study concentrates on the internationally accepted critical limits for soil and water, explains scientific methods of entering into vegetables and fruit, and also tries to shed light on the transfer factors of heavy metals imposing dangers on public health. Remediation of the contaminated soil and water is also discussed, and phytoremediation methods are brought forward, as compared with chemical methods. Details of different phytoremediation (phyto-accumulation, phyto-stabilization, phyto-degradation, phyto-volatilization, and hydraulic control) are also discussed. Actual case studies from North Cyprus are also provided, with real contamination levels observed. Different areas and soil/water/plant species were assessed in detail, displaying concentrations, critical limits, transfer factors, and recommendations.