Due to their high energy density and compatible physical properties, several monoterpenes have been investigated as potential renewable transportation fuels, either as blendstocks with petroleum or as drop-in replacements for use in vehicles (both heavy and light-weight) or in aviation. Sustainable microbial production of these biofuels requires the ability to utilize cheap and readily available feedstocks such as lignocellulosic biomass, which can be depolymerized into fermentable carbon sources such as glucose and xylose. However, common microbial production platforms such as the yeast Saccharomyces cerevisiae are not naturally capable of utilizing xylose, hence requiring extensive strain engineering and optimization to efficiently utilize lignocellulosic feedstocks. In contrast, the oleaginous red yeast Rhodosporidium toruloides is capable of efficiently metabolizing both xylose and glucose, suggesting that it may be a suitable host for the production of lignocellulosic bioproducts. In addition, R. toruloides naturally produces several carotenoids (C40 terpenoids), indicating that it may have a naturally high carbon flux through its mevalonate (MVA) pathway, providing pools of intermediates for the production of a wide range of heterologous terpene-based biofuels and bioproducts from lignocellulose. Sixteen terpene synthases (TS) originating from plants, bacteria and fungi were evaluated for their ability to produce a total of nine different monoterpenes in R. toruloides. Eight of these TS were functional and produced several different monoterpenes, either as individual compounds or as mixtures, with 1,8-cineole, sabinene, ocimene, pinene, limonene, and carene being produced at the highest levels. The 1,8-cineole synthase HYP3 from Hypoxylon sp. E74060B produced the highest titer of 14.94 ± 1.84 mg/L 1,8-cineole in YPD medium and was selected for further optimization and fuel properties study. Production of 1,8-cineole from lignocellulose was also demonstrated in a 2L batch fermentation, and cineole production titers reached 34.6 mg/L in DMR-EH (Deacetylated, Mechanically Refined, Enzymatically Hydorlized) hydrolysate. Finally, the fuel properties of 1,8-cineole were examined, and indicate that it may be a suitable petroleum blend stock or drop-in replacement fuel for spark ignition engines. Our results demonstrate that Rhodosporidium toruloides is a suitable microbial platform for the production of non-native monoterpenes with biofuel applications from lignocellulosic biomass.

Recent studies have revealed that caryophyllene and its stereoisomers not only exhibit multiple biological activities but also have desired properties as renewable candidates for ground transportation and jet fuel applications. This study presents the first significant production of caryophyllene and caryolan-1-ol by an engineered E. coli with heterologous expression of mevalonate pathway genes with a caryophyllene synthase and a caryolan-1-ol synthase. By optimizing metabolic flux and fermentation parameters, the engineered strains yielded 449 mg/L of total terpene, including 406 mg/L sesquiterpene with 100 mg/L caryophyllene and 10 mg/L caryolan-1-ol. Furthermore, a marine microalgae hydrolysate was used as the sole carbon source for the production of caryophyllene and other terpene compounds. Under the optimal fermentation conditions, 360 mg/L of total terpene, 322 mg/L of sesquiterpene, and 75 mg/L caryophyllene were obtained from the pretreated algae hydrolysates. The highest yields achieved on the biomass basis were 48 mg total terpene/g algae and 10 mg caryophyllene/g algae and the caryophyllene yield is approximately ten times higher than that from plant tissues by solvent extraction. The study provides a sustainable alternative for production of caryophyllene and its alcohol from microalgae biomass as potential candidates for next generation aviation fuels.

Engineering strategies to create promoters that are both higher strength and tunable in the presence of inexpensive compounds are of high importance to develop metabolic engineering technologies that can be commercialized. Lignocellulosic biomass stands out as the most abundant renewable feedstock for the production of biofuels and chemicals. However, lignin a major polymeric component of the biomass is made up of aromatic units and remains as an untapped resource. Novel synthetic biology tools for the expression of heterologous proteins are critical for the effective engineering of a microbe to valorize lignin. This study demonstrates the first successful attempt in the creation of engineered promoters that can be induced by aromatics present in lignocellulosic hydrolysates to increase heterologous protein production. A hybrid promoter engineering approach was utilized for the construction of phenolic-inducible promoters of higher strength. The hybrid promoters were constructed by replacing the spacer region of an endogenous promoter, PemrR present in E. coli that was naturally inducible by phenolics. In the presence of vanillin, the engineered promoters Pvtac, Pvtrc, and Pvtic increased protein expression by 4.6-, 3.0-, and 1.5-fold, respectively, in comparison with a native promoter, PemrR. In the presence of vanillic acid, Pvtac, Pvtrc, and Pvtic improved protein expression by 9.5-, 6.8-, and 2.1-fold, respectively, in comparison with PemrR. Among the cells induced with vanillin, the emergence of a sub-population constituting the healthy and dividing cells using flow cytometry was observed. The analysis also revealed this smaller sub-population to be the primary contributor for the increased expression that was observed with the engineered promoters. This study demonstrates the first successful attempt in the creation of engineered promoters that can be induced by aromatics to increase heterologous protein production. Employing promoters inducible by phenolics will provide the following advantages: (1) develop substrate inducible systems; (2) lower operating costs by replacing expensive IPTG currently used for induction; (3) develop dynamic regulatory systems; and (4) provide flexibility in operating conditions. The flow cytometry findings strongly suggest the need for novel approaches to maintain a healthy cell population in the presence of phenolics to achieve increased heterologous protein expression and, thereby, valorize lignin efficiently.

High-protein algal biomass is an important bio-commodity that has the potential to provide a new source of sustainable protein products. Herein is a critical review that identifies (1) the most relevant sustainability findings related to the processing of proteinaceous algal biomass to higher value protein products and (2) the potential pathways to improve life cycle assessment (LCA) and techno-economic analysis (TEA) metrics, including life-cycle carbon dioxide equivalent (CO₂eq), life cycle energy, and minimum selling price (MSP) of these products. The critical review of the literature revealed a large variation in model input parameters relating to these metrics. Therefore, a Monte Carlo analysis was conducted to assess the risk associated with these input variations. To understand the uncertainties that propagate into high-protein algae to products' systems, we reviewed more than 20 state-of-the-art unit operations for algal biomass processing., including cell disruption, protein solubilization, protein precipitation and purification, and protein concentration. We evaluated displacement of proteinaceous products by algal-bioproducts, including ruminant feed, aquaculture feed, protein tablets, and biopolymers and biopolyesters, with prices in the market ranging from 1.9 to 120 $ kg⁻¹ protein. This review realized that the MSP of ruminant and non-ruminant feed ranges from 0.65 ± 0.56 to 2.9 ± 1.1 $ kg⁻¹ protein, and bioplastics' MSP ranges from 0.97 to 7.0 $ kg⁻¹ protein. Regarding LCA metrics, there is limited research on life cycle energy in proteinaceous biomass concentration and bioproduct systems, reported at 32.7 MJ kg_protein ⁻¹, for animal feed displacement. Animal feed emissions in the literature report negative fluxes, representing environmental benefits, as low as −3.7 kg CO₂eq kg⁻¹ protein and positive fluxes, i.e., global warming potential, as high as 12.8 kg CO₂eq kg⁻¹ protein. There is limited research on bioplastics life cycle emissions reported at 0.6 kg CO₂eq kg⁻¹ protein. In general, the studies to date of algae-derived protein bioproducts showed similar life cycle emissions to soybean meals, nylon, polymers, and polystyrenes. Our risk analysis realized that more than 50% of scenarios can result in negative-net life cycle CO₂eq emissions. This review and risk analysis assess and demonstrate the scenarios that improve economic and environmental sustainability metrics in high-protein algal bioproduct systems.