To achieve low carbon emissions in the power system and contribute to economic growth, a low-carbon optimization scheduling strategy for a power system, considering carbon responsibility sharing and electric vehicle demand response, is proposed based on the establishment of a flexible-load model guided by carbon potential. Firstly, utilizing the principle of proportional sharing to track carbon emission flow and establish a carbon emission flow model. Secondly, based on the Shapley value carbon responsibility allocation method, the reasonable range of carbon responsibility on each load side is calculated, and a hierarchical carbon price is established. A load aggregator demand response carbon emission model is established using the node carbon potential, and a dual-layer optimization scheduling model for the power system based on the node carbon potential demand response is constructed. The upper layer of the model is the optimal economic dispatch of the power grid operator, and the lower layer is the demand response economic dispatch of the load aggregator. Through numerical verification, the carbon trading model takes into account the system’s carbon emissions and overall operating costs while balancing the system’s low-carbon and economic aspects.
The rapid growth of data centers has sharply increased power consumption and greenhouse gas emissions, making improved energy efficiency and renewable energy integration urgent priorities for their sustainable development. This study proposes an integrated energy system for powering and cooling data centers, combining photovoltaic (PV) modules, a proton exchange membrane (PEM) electrolyzer, a PEM fuel cell (PEMFC), and an absorption chiller. When solar energy is available, the PV is first supplied to power the data center, and the surplus is directed to the PEM electrolyzer for hydrogen production via water electrolysis. The stored hydrogen is later converted back into electricity through the PEMFC during peak-price periods in the nighttime or when solar irradiance is insufficient. Waste heat from the electrolyzer and PEMFC is used to drive the absorption chiller for data center cooling and waste heat recovery, while recovered heat from the data center is utilized for domestic hot water and space heating. A comprehensive exergy analysis is conducted to assess the thermodynamic performance of the proposed polygeneration system, alongside an evaluation of its economic and environmental benefits under varying PV participation levels. Comparative results show that when PV generation meets 40% of the annual power demand in the data center, annual operating costs can be reduced by approximately $238,000 and CO2 emissions by 2,940 tons compared with a conventional grid-supplied configuration. Additionally, the integrated system achieves an average power usage effectiveness (PUE) of 1.25 and a maximum exergy efficiency of 28.5% during the heating season, highlighting its strong potential to enhance energy efficiency and mitigate environmental impacts, particularly in regions with moderate solar radiation.
Amidst the global strategic transition towards low-carbon energy systems, electric vehicles (EVs) are pivotal for achieving deep decarbonization within the transportation sector. Consequently, enhancing the scientific rigor and precision of their life-cycle carbon footprint assessments is of paramount importance. Addressing the limitations of existing research, notably ambiguous assessment boundaries and the omission of dynamic coupling characteristics, this study develops a dynamic regional-level life-cycle carbon footprint assessment model for EVs that incorporates time-variant carbon emission factors. The methodology first delineates system boundaries based on established life-cycle assessment (LCA) principles, establishing a comprehensive analytical framework encompassing power battery production, vehicle manufacturing, operational use, and end-of-life recycling. Subsequently, inventory analysis is employed to model carbon emissions during the production and recycling phases. Crucially, for the operational phase, we introduce a novel source–load synergistic optimization approach integrating dynamic carbon intensity tracking. This is achieved by formulating a low-carbon dispatch model that accounts for power grid security constraints and the spatiotemporal distribution of EVs, thereby enabling the calculation of dynamic nodal carbon intensities and consequential EV emissions. Finally, data from these distinct stages are integrated to construct a holistic life-cycle carbon accounting system. Our results, based on a typical regional grid scenario, reveal that indirect carbon emissions during the operational phase contribute 75.1% of the total life-cycle emissions, substantially outweighing contributions from production (23.4%) and recycling (1.5%). This underscores the significant carbon mitigation leverage of the use phase and validates the efficacy of our dynamic carbon intensity model in improving the accuracy of regional-level EV carbon accounting.
This work explores the thermal management of cylindrical lithium-ion batteries used in electric vehicles by introducing a combined cooling approach that couples phase-change materials (PCM) with a liquid-based cooling loop. Fluent-based numerical simulations are conducted to first examine the effects of battery spacing and ambient temperature on PCM cooling performance, from which the optimal spacing is identified. Building on this foundation, a coupled PCM–liquid cooling model is developed to evaluate the impacts of liquid-channel inlet configuration, coolant flow velocity, and inlet temperature. Results show that varying the inlet position has little impact when the outlet is fixed. Increasing coolant velocity lowers the peak cell temperature and the extent of PCM melting but enlarges the temperature difference, reaching 5.03 °C at 0.0075 m/s, which exceeds the recommended safety threshold. Lowering the coolant inlet temperature further decreases the peak temperature but also deteriorates temperature uniformity. To simultaneously suppress both the maximum temperature (Tmaxi) and temperature gradient, two structural optimization schemes are proposed. Among them, distributing liquid cooling plates evenly above and below the battery pack achieves the best overall performance. The findings demonstrate the strong cooling potential of the PCM–liquid hybrid system and offer theoretical support for the design and optimization of advanced battery thermal management systems.
1 January 2025 in Frontiers in Heat and Mass Transfer
As the integration of electronic components in high-performance servers increases, heat generation significantly impacts performance and raises failure rates. Therefore, heat dissipation has become a critical concern in elect... | Find, read and cite all the research you need on Tech Science Press
16 January 2025 in Molecular & Cellular Biomechanics
With the widespread application of Global Navigation Satellite System (GNSS) in the fields of positioning and navigation, traditional single frequency and single system positioning methods are gradually unable to meet the requirements of high accuracy and high reliability. Especially in complex and dynamic environments, GNSS signals are affected by multipath effects, occlusion, and interference, resulting in a significant decrease in positioning accuracy. Therefore, it is particularly important to develop a multi-frequency and multi-system GNSS positioning data fusion algorithm. This article used Kalman filtering technology and combined the data characteristics of multi-frequency and multi-system GNSS signals to study a new positioning data fusion algorithm. By comprehensively processing different GNSS systems and frequency signals, the positioning accuracy and anti-interference ability were significantly improved. The experimental results showed that the algorithm studied improved the average positioning accuracy by more than 6.23% in complex environments compared to traditional methods, and also exhibited good adaptability and stability under dynamic conditions. Fully utilizing the advantages of multi-frequency signals and combining advanced data fusion technology is an effective way to improve GNSS positioning performance, providing new ideas and methods for future intelligent navigation applications.