This paper presents the synthesis of the organic–inorganic hybrid perovskite, CH3NH3PbI3, doped in the Pb2+ position with Sn2+, Sr2+, Cd2+ and Ca2+. The incorporation of the dopants into the crystalline structure was analysed, observing how the characteristics of the dopant affected properties such as the crystalline phase, emission and optical properties. XRD showed how doping with Sn2+, Sr2+ and Cd2+ did not modify the normal tetragonal phase. When doping with Ca2+, the cubic phase was obtained. Moreover, DR-UV-Vis spectroscopy showed how the band gap decreased with the dopants, the values following the trend Sr2+ < Cd2+ < Ca2+ < CH3NH3PbI3 ≈ Sn2+. The biggest decrease was generated by Sr2+, which reduced the CH3NH3PbI3 value by 4.5%. In turn, cathodoluminescence (CL) measurements confirmed the band gap obtained. Periodic-DFT calculations were performed to understand the experimental structures. The DOS analysis confirmed the experimental results obtained using UV-Vis spectroscopy, with the values calculated following the trend Sn2+ ≈ Pb2+ > Cd2+ > Sr2+ for the tetragonal structure and Pb2+ > Ca2+ for the cubic phase. The electron localization function (ELF) analysis showed similar electron localizations for undoped and Sn2+-doped tetragonal structures, which were different from those doped with Sr2+ and Cd2+. Furthermore, when Cd2+ was incorporated, the Cd–I interaction was strengthened. For Ca2+ doping, the Ca–I interaction had a greater ionic nature than Cd–I. Finally, an analysis based on the non-covalent interaction (NCI) index is presented to determine the weak-type interactions of the CH3NH3 groups with the dopant and I atoms. To our knowledge, this kind of analysis with these hybrid systems has not been performed previously.
We present a study concerning the effect of the on site Coulomb interaction energy on the band-gap states of nonstoichiometric rutile (110) surface. As well known, the excess electrons resulting from the formation of oxygen vacancies localize on the orbitals forming band-gap states. Local density approximation (LDA) does not give a correct description of these band-gap states, either with or without gradient corrections. The failure of LDA is often attributed to an inadequate treatment of electron correlation in systems with localized orbitals and is commonly corrected with an empirical local Coulomb repulsion term, i.e., the method. This study provides a completely general strategy to estimate the value in this kind of systems, illustrated here for reduced (110) surface, well characterized from experiments. From ab initio embedded cluster configuration interaction calculations, combined with the effective Hamiltonian theory, a value of of is obtained, in good agreement with those reported for this system from x-ray photoemission spectroscopy experiments . It is observed that when the ab initio estimate of is injected into the periodic calculations, a correct description of the gap states is obtained from the periodic calculations. Additionally, the results indicate that the position of these states on the band gap strongly depends on the level at which lattice relaxation is taken into account, with significant differences between the density of states curves at the level obtained using the optimal generalized gradient approximation or geometries. These results suggest that this combined strategy could be a useful tool for those systems where electron correlation plays a key role, and no experimental data are available for the on-site Coulomb repulsion.
1 December 2010 in Journal of Chemical Theory and Computation
A good correlation was obtained between the electronic properties of Cu-doped anatase TiO2 by virtue of both physical chemistry characterization and theoretical calculations. Pure and Cu-doped TiO2 were synthesized. The composition, structural and electronic properties, and the band gap energy were obtained using several techniques. The method of synthesis used produces Cu-doped anatase TiO2, and XRD, XPS and Raman spectroscopy indicate that Cu atoms are incorporated in the structure by substitution of Ti atoms, generating a distortion of the structure and oxygen vacancies. In turn, the band gap energy of the synthesized samples decrease drastically with the Cu doping. Moreover, periodic density functional theory (DFT-periodic) calculations were carried out both to model the experimentally observed doped structures and to understand theoretically the experimental structures obtained, the formation of oxygen vacancies and the values of the band gap energy. From the analysis of density of states (DOS), projected density of states (PDOS) and the electron localization function (ELF) a decrease in the band gap is predicted upon increasing the Cu doping. Thus, the inclusion of Cu in the anatase structure implies a covalent character in the Cu–O interaction, which involves the appearance of new states in the valence band maximum with a narrowing in the band gap.
Photocatalysts based on metal-organic frameworks (MOFs) are very promising due to a combination of high tuneability and convenient porous structure. Introducing porphyrin units within MOFs is a potential route to engineer these natural photosynthesis molecular catalysts into artificial photosynthesis heterogeneous catalysts. Using computer simulations based on density functional theory, we explore how to modify the electronic structure of porphyrin-based MOFs to make them suitable for the photocatalysis of solar fuel synthesis via water splitting or carbon dioxide reduction. In particular, we have investigated the effect that Fe substitutions have on the electronic properties of porphyrin-based metal organic frameworks. By aligning the electron levels with a vacuum reference, we show that Fe at the porphyrin metal centre has the effect of slightly raising the position of the valence band edge, whereas Fe at the octahedral metal node has the ability to significantly lower the position of the conduction band edge on the absolute scale. Iron is therefore a very useful dopant to engineer the band structure and alignment of these MOFs. We find that the porphyrin-based structure with Al in the octahedral sites and Zn in the porphyrin centres has a band gap that is slightly too wide to take advantage of visible-light solar radiation, while the structure with Fe in the octahedral sites has bandgaps that are too narrow for water splitting photocatalysis. We then show that the optimal composition is achieved by partial substitution of Al by Fe at the octahedral sites, while keeping Zn at the porphyrin centres. Our study demonstrates that porphyrin-based MOFs can be engineered to display intrinsic photocatalytic activity in solar fuel synthesis reactions.
There is a pressing need to develop new rechargeable battery technologies that can offer higher energy storage, faster charging, and lower costs. Despite the success of existing methods for the simulation of battery materials, they can sometimes fall short of delivering accurate and reliable results. Quantum computing has been discussed as an avenue to overcome these issues, but only limited work has been done to outline how it may impact battery simulations. In this work, we provide a detailed answer to the following question: how can a quantum computer be used to simulate key properties of a lithium-ion battery? Based on recently introduced first-quantization techniques, we lay out an end-to-end quantum algorithm for calculating equilibrium cell voltages, ionic mobility, and thermal stability. These can be obtained from ground-state energies of materials, which are the core calculations executed by the quantum computer using qubitization-based quantum phase estimation. The algorithm includes explicit methods for preparing approximate ground states of periodic materials in first quantization. We bring these insights together to estimate the resources required to implement a quantum algorithm for simulating a realistic cathode material, dilithium iron silicate.