José Aécio omes de Gomes de Sousa

Dr. José Aécio omes de Gomes de Sousa

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2025 in The Journal of Engineering and Exact Sciences
Verified
Journal Article
Open access
PDF file
AJAntônio Santos Araújo Junior
Antônio Santos Araújo Junior
FCFeliciano José Ricardo Cangue
Feliciano José Ricardo Cangue
LVLuiz Leroy Thomé Vaughan
Luiz Leroy Thomé Vaughan
JSJosé Aécio omes de Gomes de Sousa
José Aécio omes de Gomes de Sousa
The drive towards sustainable manufacturing processes has led to a renewed focus on environmentally friendly alternatives in the industrial sector. Initially, the technological evolution focused on efficiency while overlooking the harmful consequences for operators and the environment. However, increasing concerns about environmental pollution and the need to comply with regulations prompted revisions in cutting fluid compositions to eliminate toxic agents with detrimental environmental impacts. This study meticulously examines the potential of various vegetable oils, including babassu, canola, cotton, corn, soya, and sunflower, as cutting fluids, comparing their performance to the well-established commercial oil LB2000. The assessment encompasses critical parameters, notably wettability, cooling efficiency, and lubricity. Our findings indicate that these edible oils exhibit behaviors closely mirroring those of the industry-standard LB2000, affirming their compatibility with machining operations. The adoption of edible oils as cutting fluids presents a compelling avenue, underpinned by their biodegradability and the prevailing global inclination towards reducing reliance on petroleum-based cutting fluids. In terms of practicality, these tested vegetable oils demonstrate remarkable suitability as cutting fluids, offering enhanced lubricity, particularly in the cutting region. Supplementary tests, spanning wetting properties, cooling capabilities, and lubricity, reaffirmed these vegetable oils' efficacy as cutting fluids, squarely within the boundaries of acceptability for industrial machining. In summary, this investigation highlights the viability of vegetable oils as sustainable and high-performance substitutes for conventional cutting fluids in industrial applications.

1 January 2025 in AIMS Materials Science
Verified
Journal Article
Open access
PDF file
JSJosé Aécio omes de Gomes de Sousa
José Aécio omes de Gomes de Sousa
AJAntônio Santos Araújo Junior
Antônio Santos Araújo Junior
FCFeliciano Cangue
Feliciano Cangue
LVLuiz Leroy Thomé Vaughan
Luiz Leroy Thomé Vaughan
This study investigates the performance of sunflower oil as a cutting fluid applied through the minimum quantity fluid (MQF) technique in drilling processes with high-speed steel drills. The results reveal that sunflower oil significantly reduces torque compared to dry machining, with a 7.59% reduction in torque when cutting speed increased from 17 to 25 m/min. Additionally, sunflower oil shows competitive results in comparison to LB2000 commercial oil, with a slight decrease in torque of 2.04%. The study also found that sunflower oil outperforms dry machining, particularly when used at lower feed rates and higher cutting speeds, suggesting that sunflower oil could be a viable and environmentally friendly alternative in machining processes. These findings offers a promising solution for reducing friction and improving machining efficiency, while also addressing environmental and health concerns.

1 October 2024 in REVISTA DELOS
Verified
Journal Article
Open access
PDF file
LVLuiz Leroy Thomé Vaughan
Luiz Leroy Thomé Vaughan
FCFeliciano Cangue
Feliciano Cangue
JSJosé Aécio omes de Gomes de Sousa
José Aécio omes de Gomes de Sousa
This article delves into transport phenomena, essential in science and engineering research, emphasizing Matano's Interface as a key element in diffusion studies. The primary goal is to elucidate a graphical procedure for approaching Matano's Interface within diffusion couples, aiming to calculate diffusion coefficients across various compositions. The comprehensive exploration of the Boltzmann-Matano method, particularly focusing on concentration-dependent diffusion coefficients, is accentuated. Acknowledging the historical context of Ludwig Boltzmann and Matano, the article highlights the practical application of their methodologies, notably in an annealed copper-zinc couple. The graphical determination of the Boltzmann-Matano interface proves crucial in understanding diffusion dynamics. The article successfully integrates theoretical understanding with practical insights, contributing to the broader field of transport phenomena research in science and engineering.

25 November 2024 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
ARAlcione dos Reis
Alcione dos Reis
JSJosé Aécio omes de Gomes de Sousa
José Aécio omes de Gomes de Sousa
LVLuiz Leroy Thomé Vaughan
Luiz Leroy Thomé Vaughan
FCFeliciano Cangue
Feliciano Cangue
Alisson Rocha MachadoAlisson Rocha Machado
Alisson Rocha Machado
Gustavo Henrique Nazareno FernandesGustavo Henrique Nazareno Fernandes
Gustavo Henrique Nazareno Fernandes

1 January 2025 in Matéria (Rio de Janeiro)
Verified
Journal Article
Open access
PDF file
FSFlavia Cristina Sousa e Silva
Flavia Cristina Sousa e Silva
CNClaudio Gomes Do Nascimento
Claudio Gomes Do Nascimento
LVLuiz Leroy Thomé Vaughan
Luiz Leroy Thomé Vaughan
FCFeliciano José Ricardo Cangue
Feliciano José Ricardo Cangue
JSJosé Aécio omes de Gomes de Sousa
José Aécio omes de Gomes de Sousa
Stainless steels are pivotal materials in industry and find extensive application in various types of equipment due to their excellent chemical properties, such as high corrosion resistance and the ability to withstand elevated temperatures. However, they exhibit greater machining challenges compared to common carbon and low-alloy steels, mainly because of their high work-hardening rate during cutting operations. Consequently, the industry has a strong interest in understanding and monitoring machining techniques for these materials. This study introduces a novel approach by correlating tool wear progression with chip morphology in the dry turning of SAE 304 stainless steel, using coated carbide tools. Wear tests were carried out, and chip samples were collected at each stage of tool wear. Analyses of chip type and shape were performed, followed by metallographic evaluations. The results indicate a measurable correlation between wear stages and chip morphology, suggesting that chip analysis can serve as a practical method for real-time tool condition monitoring.This finding provides a cost-effective alternative for tool wear assessment, enhancing the efficiency and reliability of machining operations involving austenitic stainless steels.

3 January 2025 in The Journal of Engineering and Exact Sciences
Verified
Journal Article
Open access
PDF file
HSHellen Cristina Pires Souza
Hellen Cristina Pires Souza
AJAntônio Santos Araújo Junior
Antônio Santos Araújo Junior
FCFeliciano José Ricardo Cangue
Feliciano José Ricardo Cangue
LVLuiz Leroy Thomé Vaughan
Luiz Leroy Thomé Vaughan
JSJosé Aécio omes de Gomes de Sousa
José Aécio omes de Gomes de Sousa
Machinability is a crucial aspect of manufacturing, as most industrial products undergo machining processes. In these processes, cutting fluids play an important role by reducing tool wear and improving cooling and lubrication. However, conventional fluids, generally formulated from petroleum-derived mineral oils, are non-renewable resources and have potential environmental impacts. As an alternative, vegetable based oils emerge as renewable, biodegradable, and environmentally more sustainable options. This study aims to comparatively evaluate the performance of a conventional synthetic cutting fluid and two vegetable-based fluids (cottonseed oil and canola oil) in the turning process, using the minimum quantity lubrication (MQL) technique. Dry tests were also conducted as a reference. The output variables analyzed were: cutting force, surface roughness, and vibration. The results demonstrated that cottonseed and canola vegetable oils showed satisfactory performance, with cottonseed oil standing out for its better surface finish and lower vibrations.