The protection of combustible cartridge cases (CCCs) benefits from applying composite coatings, which significantly extend their heat resistance time and improve their waterproof properties and corrosion resistance. In this study, a series of polyimide-modified epoxy resin composite films (NPMFs) was developed and applied as protective coatings. The polyimide-modified epoxy resin was designed through cross-linking reactions between epoxy resin and polyimide, forming the film material. The heat resistance and flame retardation of the NPMFs were attributed to the introduction of inorganic fillers. The results demonstrated that NPMF-3 significantly delayed the ignition of CCCs, withstanding temperatures of 270 °C for 109 s, thus, enhancing heat resistance by 104.1%. Meanwhile, the saltwater absorption rate of NPMF-4 was only 6.92 wt%, which was reduced by 82.10 wt% compared to the uncoated CCC sample. The maximum storage modulus value of all NPMFs exceeded 2000 MPa. Compared to the uncoated CCC sample, the tensile strength and elongation at break of NPMF-3 increased by 203.52% and 570.24%, respectively. Additionally, the corrosion rate of the Zn-Fe alloy samples coated with NPMFs was significantly lower than the uncoated samples, indicating strong protection against salt corrosion. These performance results were among the highest currently observed for CCCs. Therefore, these NPMFs not only possessed excellent thermal stability and corrosion resistance, but may also play an important role in CCC protection and marine corrosion resistance applications.

With the increasing demand for alternatives to traditional indium tin oxide (ITO), copper nanowires (Cu NWs) have gained significant attention due to their excellent conductivity, cost-effectiveness, and ease of synthesis. However, challenges such as wire–wire contact resistance and oxidation susceptibility hinder their practical applications. This review discusses the development and challenges associated with Cu NW-based flexible transparent conductors (FTCs). Cu NWs are considered a promising alternative to traditional materials like ITO, thanks to their high electrical conductivity and low cost. This paper explores various synthesis methods for Cu NWs, including template-assisted synthesis, hydrazine reduction, and hydrothermal processes, while highlighting the advantages and limitations of each approach. The key challenges, such as contact resistance, oxidation, and the need for protective coatings, are also addressed. Several strategies to enhance the conductivity and stability of Cu NW-based FTCs are proposed, including thermal sintering, laser sintering, acid treatment, and photonic sintering. Additionally, protective coatings like noble metal core–shell layers, electroplated layers, and conductive polymers like PEDOT:PSS are discussed as effective solutions. The integration of graphene with Cu NWs is explored as a promising method to improve oxidation resistance and overall performance. The review concludes with an outlook on the future of Cu NWs in flexible electronics, emphasizing the need for scalable, cost-effective solutions to overcome current challenges and improve the practical application of Cu NW-based FTCs in advanced technologies such as displays, solar cells, and flexible electronics.

Polyaniline (PANI), characterized by its proton-coupled redox mechanism and multicolor reversibility, is widely investigated for adaptive optical interfaces. Compared to inorganic oxides, PANI offers advantages in cost-effectiveness, mechanical flexibility, and molecular tunability; however, its practical implementation faces challenges related to kinetic limitations and environmental instability. This review presents a comprehensive analysis of PANI-based electrochromic materials, examining the intrinsic correlations among synthesis methodologies, microstructural characteristics, and optoelectronic performance. Synthesis strategies, including chemical oxidative polymerization, electrochemical deposition, and template-assisted techniques, are evaluated. Emphasis is placed on resolving the trade-off between optical contrast and switching kinetics by constructing high-surface-area porous nanostructures and inducing chain ordering via functional dopants to shorten ion diffusion paths and reduce charge transfer resistance. Fundamental electrochromic properties are subsequently discussed, with specific attention to degradation mechanisms triggered by environmental factors, such as pH drift, and stabilization strategies involving electrolyte engineering and composite design. Furthermore, the review addresses the evolution of applications from single-band monochromatic displays to dual-band smart windows for decoupled visible/near-infrared regulation and multifunctional integrated systems, including electrochromic supercapacitors and adaptive thermal management textiles. Finally, technical challenges regarding long-term durability, neutral color development, and large-area manufacturing are summarized to outline future research directions for PANI-based optical systems.

Polyaniline (PANI), as a classical conducting polymer, has attracted significant attention in the field of energy storage due to its low cost, facile synthesis, environmental stability, and unique dual electronic/ionic conductivity. Particularly, one-dimensional (1D) nanostructures of PANI, such as nanowires and nanorods, exhibit superior electrochemical performance and cycling stability, attributed to their high surface area and efficient charge transport pathways. This review provides a comprehensive summary of recent advances in 1D PANI-based anode materials for lithium-ion, sodium-ion, and other types of rechargeable batteries. The specific capacity, rate performance, and long-term cycling behavior of these materials are discussed in detail. Moreover, strategies for performance enhancement through combination with carbon materials, metal oxides, and silicon, as well as chemical doping and structural modification, are systematically reviewed. Key challenges including electrochemical stability, structural durability, and large-scale fabrication are analyzed. Finally, the future directions in structural design, composite engineering, and commercialization of 1D PANI anode materials are outlined. This review aims to provide insight and guidance for the further development and practical application of PANI-based energy storage systems.