Silica optical fiber was drawn from a three-dimensional printed preform. Both single mode and multimode fibers are reported. The results demonstrate additive manufacturing of glass optical fibers and its potential to disrupt traditional optical fiber fabrication. It opens up fiber designs for novel applications hitherto not possible.
A temperature insensitive vector curvature sensor of photonic crystal fiber (PCF) is presented based on core-offset splicing and waist-enlarged fiber taper. Obvious red and blue shifts in transmission spectrum appear at two symmetrical bending directions with sensor length of 10, 13, 16, and 19 mm and vector curvature of 0.12-1.06 m -1 . The longer the sensor length is, the larger the curvature sensitivity is. The corresponding sensitivity with concave bending and convex bending are increased on average by 0.44 and 0.43 nm/m -1 , respectively, while the sensor length increases per 1 mm. Moreover, when sensor length is 16 mm, the temperature sensitivity is only 1.73 pm/°C in 20-90 °C; therefore, it has the temperature insensitive property. Obviously, the reported sensor could avert cross-sensitivity of temperature and curvature when measured together. It is prospective being used in industrial production, building monitoring, aerospace, and other fields in view of its easy fabrication, simple structure, and high sensitivity.
A multi-parameter sensor based on dumbbell-shaped double-cladding fiber (DCF) structure cascaded long period fiber grating (LPFG) is proposed and fabricated. It is formed by discharging between single mode fiber (SMF) and DCF to form a waist-enlarged taper and then cascading two LPFGs. When the fiber is affected by the thermal expansion effect, thermo-optic effect and elasto-optic effect, the resonant peaks formed by inter-mode interference will shift, and the shifts generated by different resonant peaks are also different. By demodulating the wavelength shift of the three resonant peaks, the temperature, refractive index and axial strain can be measured by using the coefficient sensitivity matrix. The experimental results show that the temperature sensitivity of the three resonance peaks is 14.79pm/°C, 69.07pm/°C and 89.83pm/°C in the range of 25°C~80°C. The refractive index sensitivities of three resonance peaks are 14.27nm/RIU, -71.39nm/RIU and -141.07nm/RIU in the range of 1.3355~1.3715. The axial strain sensitivities of three resonance peaks are -2.26pm/με, -2.5pm/με and -3.14pm/με in the range of 75με~525με. The corresponding resolutions are 0.6905°C, 0.00054RIU and 36.323με, respectively. The sensor is simple and has good linearity. It can be widely used in environmental monitoring for different parameter.