Although equipment-based gas sensor systems (e.g., high-performance liquid chromatography) have been widely applied for formaldehyde gas detection, pre-treatment and expensive instrumentation are required. To overcome these disadvantages, we developed a colorimetric sensor based on polymer-based core–shell nanoparticles (PCSNPs), which are inexpensive, stable, and exhibit enhanced selectivity. Spherical and uniform poly(styrene-co-maleic anhydride) (PSMA)/polyethyleneimine (PEI) core–shell nanoparticles were prepared and then impregnated with Methyl Red (MR), Bromocresol Purple (BCP), or 4-nitrophenol (4-NP) to construct colorimetric sensors for formaldehyde gas. The intrinsic properties of these dyes were maintained when introduced into the PCSNPs. In the presence of formaldehyde, the MR, BCP, and 4-NP colorimetric sensors changed to yellow, red, and gray, respectively. The colorimetric response was maximized at a PEI/PSMA ratio of four, likely owing to the high content of amine groups. Effective formaldehyde gas detection was achieved at a relative humidity of 30% using the MR colorimetric sensor, which exhibited a large color change (92%) in 1 min. Advantageously, this stable sensor allowed sensitive and rapid naked-eye detection of low formaldehyde concentrations (0.5 ppm). Hence, this approach is promising for real-time formaldehyde gas visualization and can also be adapted to other colorimetric gas sensor systems to improve sensitivity and simplicity.

The motions of different types of domain walls (DWs) driven by direct current (dc) magnetic field in soft magnetic nanostripes were calculated. The DWs exhibit steady and transient motions in the low fields and oscillations of their internal structure above a critical field. A developed soliton model of the walls explains their dynamics by the motions of a limited number of magnetic topological solitons having nonzero gyrovectors such as vortex and antivortex. The model predicts the reduced DW velocity and critical field in the low-field regime, and increased wall-oscillation frequency in nanostripes, compared to the Walker solution for bulk magnets. The critical field and velocity are determined by the nanostripe thickness and width, whereas the oscillation frequency depends only on the field strength.

Polyglycolic acid (PGA) is a promising polymer in the packaging field owing to its excellent hydrolysis, heat resistance, and gas barrier properties, but it is limited in application due to its poor toughness. For this reason, a covalently bonded chain extender is introduced to increase compatibility with flexible polymers. However, covalent bonds are unfavorable for application to degradable plastics because of the energy required for reverse reactions. Therefore, we intended to effectively control the ductility of blending plastics by using a novel ionic chain extender with a relatively weaker non-covalent bond than the existing covalent bond. Polycaprolactone (PCL), which has biodegradability and flexibility, was selected as a blending polymer. For comparison, a covalently reactive chain extender (G-CE) and a non-covalently ionic chain extender (D-CE) were synthesized and compounded with blending plastics. Each chain extender improved the compatibility between PGA and PCL, and the ductility of the PGA/PCL blending plastics was more greatly enhanced with non-covalently bonded D-CE than with covalently bonded G-CE. At this time, the ductility of the PGA/PCL(90/10) blending plastic without CE was 7.2%, the ductility of blending plastic with D-CE (10D) was 26.6%, and the ductility of blending plastic with G-CE (10G) was 18.6%. Therefore, it was confirmed that the novel ionic chain extender inducing non-covalent bonds improves the compatibility between PGA and PCL and is more advantageous in enhancing ductility through a reversible reaction.