Yu Wang

Mr. Yu Wang


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2025 in Materials
Verified
Journal Article
Open access
PDF file
YWYu Wang
Yu Wang
MTMingliang Tang
Mingliang Tang
HZHai Zheng
Hai Zheng
ZHZenghan Hu
Zenghan Hu
YZYa Zhong
Ya Zhong
CYChuanjiang Yang
Chuanjiang Yang
With the advancement of aero-engine thrust-to-weight ratios, turbine blades now incorporate complex hollow structures fabricated using ceramic cores. The emergence of light-curing 3D printing technology for ceramic cores offers a viable solution to producing such complex structural components. To avoid the breakage of the core when removing the support after the printing of the general paste, we used a rheological additive, organic bentonite, to prepare a light-curing 3D-printed silicon-based ceramic core paste that can allow for unsupported printing. This study pursues two primary research objectives: Firstly, the effect of organic bentonite on the rheological behavior and stability properties of silicon-based ceramic was investigated. Secondly, we conducted a comprehensive analysis of how organic bentonite modification influences the performance of silicon-based ceramics. The results show that, firstly, the addition of organic bentonite dramatically improves the rheology and stability of silicon-based ceramic paste, and that the optimal content is between 1 and 2 wt.% for the best effect. Second, after the primary sintering process (1250 °C), partial bentonite can produce a small amount of cordierite phase and promote the generation of cristobalite. The room-temperature performance of the ceramic core can be improved. However, organic bentonite, after secondary sintering at 1550 °C, completely forms cordierite and reduces the amount of square quartz produced. Then, it negatively affects the high-temperature performance of the ceramic core. Therefore, when the content of organic bentonite is 1 wt.%, the ceramic paste has superior rheology and stability, making unsupported printing possible. Our study revealed an apparent porosity of 32.43%, a bulk density of 1.64 g/cm3, a sintering shrinkage value of 2.94%, a room-temperature flexural strength of 24.7 MPa, a high-temperature (1550 °C) flexural strength of 10.1 MPa and a high-temperature deflection of 1.24 mm, which meet the requirements of core printing.