Chuanjiang Yang

Mr. Chuanjiang Yang


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2025 in Materials
Verified
Journal Article
Open access
PDF file
YWYu Wang
Yu Wang
MTMingliang Tang
Mingliang Tang
HZHai Zheng
Hai Zheng
ZHZenghan Hu
Zenghan Hu
YZYa Zhong
Ya Zhong
CYChuanjiang Yang
Chuanjiang Yang
With the advancement of aero-engine thrust-to-weight ratios, turbine blades now incorporate complex hollow structures fabricated using ceramic cores. The emergence of light-curing 3D printing technology for ceramic cores offers a viable solution to producing such complex structural components. To avoid the breakage of the core when removing the support after the printing of the general paste, we used a rheological additive, organic bentonite, to prepare a light-curing 3D-printed silicon-based ceramic core paste that can allow for unsupported printing. This study pursues two primary research objectives: Firstly, the effect of organic bentonite on the rheological behavior and stability properties of silicon-based ceramic was investigated. Secondly, we conducted a comprehensive analysis of how organic bentonite modification influences the performance of silicon-based ceramics. The results show that, firstly, the addition of organic bentonite dramatically improves the rheology and stability of silicon-based ceramic paste, and that the optimal content is between 1 and 2 wt.% for the best effect. Second, after the primary sintering process (1250 °C), partial bentonite can produce a small amount of cordierite phase and promote the generation of cristobalite. The room-temperature performance of the ceramic core can be improved. However, organic bentonite, after secondary sintering at 1550 °C, completely forms cordierite and reduces the amount of square quartz produced. Then, it negatively affects the high-temperature performance of the ceramic core. Therefore, when the content of organic bentonite is 1 wt.%, the ceramic paste has superior rheology and stability, making unsupported printing possible. Our study revealed an apparent porosity of 32.43%, a bulk density of 1.64 g/cm3, a sintering shrinkage value of 2.94%, a room-temperature flexural strength of 24.7 MPa, a high-temperature (1550 °C) flexural strength of 10.1 MPa and a high-temperature deflection of 1.24 mm, which meet the requirements of core printing.

14 April 2026 in Materials
Verified
Journal Article
Open access
PDF file
MTMingliang Tang
Mingliang Tang
MTMingliang Tang
Mingliang Tang
HZHai Zheng
Hai Zheng
XJXiangwen Jiang
Xiangwen Jiang
CYChuanjiang Yang
Chuanjiang Yang
Ca2+-rich brines strongly destabilize bentonite-based drilling fluids by weakening hydration and increasing filter-cake permeability. In this work, raw sodium bentonite (Na-Bt) and a series of cation-exchanged bentonites (Li-, Mg-, Ca-, and K-Bt) were comparatively investigated to clarify how cation-dependent hydration characteristics and interlayer structure govern filtration behavior under saline conditions. XRD, zeta potential, TG–DTG, BET, and SEM were employed to correlate basal spacing, surface electrostatic properties, thermal/water-loss behavior, surface area and pore-structure characteristics, and filter-cake microstructure with API fluid loss. Among the examined 2 wt% brines, CaCl2 produced the most severe deterioration and was therefore selected as the representative screening condition. Under 2 wt% CaCl2, Li-Bt exhibited the lowest FLAPI (141 mL), which was substantially lower than that of Na-Bt (265 mL), indicating the most favorable intrinsic resistance to Ca2+-dominated salinity. The cation-exchange analysis further showed that Li-Bt and Mg-Bt had relatively higher calculated exchange degrees than Ca-Bt and K-Bt under the present preparation conditions. Based on the 2 wt% CaCl2 dataset, a descriptor-based relation between FLAPI, hydrated ionic radius (rh), and basal spacing (d001) was established, and an Al-modified bentonite provided an out-of-sample verification with close agreement between predicted and measured filtration loss. Additional tests in 1–3 wt% CaCl2 showed that although absolute fluid loss increased with brine severity, the relative ranking of the cation-exchanged bentonites remained broadly unchanged. TG–DTG, BET, and SEM results further provided complementary evidence for the structural and microstructural differences among the samples. Overall, the results demonstrate that hydration-related response, interlayer structure, and surface/pore characteristics jointly govern the filtration behavior of cation-exchanged bentonites, providing a useful basis for screening salt-tolerant clay materials for Ca2+-rich brines.