In this article, we propose a method for automatic calibration of a LiDAR–camera system, which can be used in autonomous cars. This approach does not require any calibration pattern, as calibration is only based on real traffic scenes observed by sensors; the results of camera image segmentation are compared with scanning LiDAR depth data. The proposed algorithm superimposes the edges of objects segmented by the Mask-RCNN network with depth discontinuities. The method can run in the background during driving, and it can automatically detect decalibration and correct corresponding rotation matrices in an online and near real-time mode. Experiments on the KITTI dataset demonstrated that, for input data of moderate quality, the algorithm could calculate and correct rotation matrices with an average accuracy of 0.23°.
Vibratory conveyors are very important elements of production lines. Very often there is a need to change the feed transport velocity, especially in the case of feeders, or to alter the transport direction in the case of symmetric production lines. The transport possibilities of the new vibratory conveyor, allowing fast changes of the velocity and direction of transporting, solely by changes of the angular velocity of the excitation vibrator, and patented by the authors, are analysed in this paper. The innovatory control method allowing fast changes of the transport direction and good stabilisation of the given velocity, without the need to pass through its resonance frequencies, is presented. This new solution increases the safety and functionality of machine operations.
The algorithm and prototype presented in the article are part of a quality control system for plastic objects coming from injection-molding machines. Some objects contain a flaw called inclusion, which is usually observed as a local discoloration and disqualifies the object. The objects have complex, irregular geometry with many edges. This makes inclusion detection difficult, because local changes in the image at inclusions are much less significant than grayscale changes at the edges. In order to exclude edges from calculations, the presented method first classifies the object and then matches it with the corresponding mask of edges, which is prepared off-line and stored in the database. Inclusions are detected based on the analysis of local variations in the surface grayscale in the unmasked part of the image under inspection. Experiments were performed on real objects rejected from production by human quality controllers. The proposed approach allows tuning the algorithm to achieve very high sensitivity without false detections at edges. Based on input from the controllers, the algorithm was tuned to detect all the inclusions. At 100% recall, 87% precision was achieved, which is acceptable for industrial applications.
The paper analyzes the transport capabilities of energy-efficient resonant conveyors, with a particular emphasis on their dosing capabilities. They are driven by an additional mass—acting as a resonator—using a relatively small vibrator whose forcing power constitutes about 20% of the force that would be needed to drive a similar conveyor of classical construction and the same transport capacity, resulting in lower energy demand. These conveyors have been present since the 1950s, but their widespread use occurred with the proliferation of cheap and easily controllable frequency inverters. In the paper, using a relatively simple model that allowed for the determination of amplitude–frequency characteristics and the dependence of transport speed on the forcing frequency, the impact of the resonator mass value on the device’s operation was shown. It was demonstrated that the value of this mass should be similar to the mass of the transporting trough, which increases the durability of the drive as well as the durability of the suspension between the trough and the resonator. A larger resonator mass also positively affects the dosing capabilities of the device and its energy efficiency during the dosing process with frequent transport stops.
The main function of triangulation-based laser profile sensors—also referred to as laser profilometers or profilers—is the three-dimensional scanning of moving objects using laser triangulation. In addition to capturing 3D data, these profilometers simultaneously generate grayscale images of the scanned objects. However, the quality of these images is often degraded due to interference of the laser light, manifesting as speckle noise. In profilometer images, this noise typically appears as vertical stripes. Unlike the column fixed pattern noise commonly observed in TDI CMOS cameras, the positions of these stripes are not stationary. Consequently, conventional algorithms for removing fixed pattern noise yield unsatisfactory results when applied to profilometer images. In this article, we propose an effective method for suppressing speckle noise in profilometer images of flat surfaces, based on local column median vectors. The method was evaluated across a variety of surface types and compared against existing approaches using several metrics, including the standard deviation of the column mean vector (SDCMV), frequency spectrum analysis, and standard image quality assessment measures. Our results demonstrate a substantial improvement in reducing column speckle noise: the SDCMV value achieved with our method is 2.5 to 5 times lower than that obtained using global column median values, and the root mean square (RMS) of the frequency spectrum in the noise-relevant region is reduced by nearly an order of magnitude. General image quality metrics also indicate moderate enhancement: peak signal-to-noise ratio (PSNR) increased by 2.12 dB, and the structural similarity index (SSIM) improved from 0.929 to 0.953. The primary limitation of the proposed method is its applicability only to flat surfaces. Nonetheless, we successfully implemented it in an optical inspection system for the furniture industry, where the post-processed image quality was sufficient to detect surface defects as small as 0.1 mm.
This paper presents the results of research on the analysis of historical data from a vision system developed by the authors, installed inside a glass furnace in one of the packaging glassworks. In particular, the authors focused on analysis of the batch blanket asymmetry coefficient and the batch line position in the furnace tank. The information obtained from the vision system allows to see phenomena occurring in the glass furnace that were previously difficult to notice. Based on this, recommendations for operators have been formulated to facilitate the glass melting process more efficiently. Based on historical process data from the SCADA production system, several models were developed that allow the batch line position in the glass furnace to be estimated. The best accuracy was achieved using the model based on neural networks. Such a model can be used to optimise furnace operation, which is at present based on the experience of human operators.