The new type of the reversible, vibratory conveyor in which a smooth velocity control (within the full range) in both directions is possible, is presented in the hereby paper. In order to investigate the correctness of the machine operation at first the physical model of the conveyor with a feed was constructed and then its mathematical model was developed. Simulations were performed for the eight-layer feed material in five columns. The obtained simulation results confirmed the proper operations of the conveyor.
The new vibratory conveyor intended for the precise material dosage was investigated in the hereby study. The transport possibilities in the circum-resonance zone were tested analytically as well as by simulation. The optimal working point of the system, allowing to lower the vibration amplitude of the eliminator on its own suspension, was found. Transport velocities in dependence on the excitation frequency were determined by simulation. The results were verified on the specially designed industrial conveyor whose parameters were determined using analytical and simulation investigations, built according to the patent application.
The paper analyzes the transport capabilities of energy-efficient resonant conveyors, with a particular emphasis on their dosing capabilities. They are driven by an additional mass—acting as a resonator—using a relatively small vibrator whose forcing power constitutes about 20% of the force that would be needed to drive a similar conveyor of classical construction and the same transport capacity, resulting in lower energy demand. These conveyors have been present since the 1950s, but their widespread use occurred with the proliferation of cheap and easily controllable frequency inverters. In the paper, using a relatively simple model that allowed for the determination of amplitude–frequency characteristics and the dependence of transport speed on the forcing frequency, the impact of the resonator mass value on the device’s operation was shown. It was demonstrated that the value of this mass should be similar to the mass of the transporting trough, which increases the durability of the drive as well as the durability of the suspension between the trough and the resonator. A larger resonator mass also positively affects the dosing capabilities of the device and its energy efficiency during the dosing process with frequent transport stops.