Fluororubber sealing products are widely used in nuclear power equipment, and the degree of degradation of their mechanical properties directly affects the sealing performance, which in turn affects the overall safety of nuclear power units. In order to quantitatively evaluate the degradation of the mechanical properties of fluororubber, the theory of ultrasonic propagation in fluororubber was studied. A second-order generalized Maxwell viscoelastic model was constructed in a small strain scenario of high-frequency harmonic vibration to describe the correlation between the mechanical properties and acoustic parameters. A nondestructive evaluation method for mechanical performance degradation using ultrasonic waves based on the nonlinear fitting of the model parameters was proposed. A control experiment was designed using O-rings that had been in service and those that had not yet been used in nuclear power, and mechanical tensile tests and electron microscopy microscopic analyses were conducted. The results showed that the overall elastic modulus of the used sealing ring (2.97 ± 0.15 GPa) was significantly higher than that of the unused sealing ring (2.75 ± 0.22 GPa), consistent with the results of the mechanical tensile tests. However, the sound attenuation coefficient of the unused sealing ring was significantly higher than that of the used sealing ring. Therefore, the ultrasonic evaluation of the mechanical performance degradation of fluororubber based on the viscoelastic model is a nondestructive testing method with engineering application potential.
During the manufacturing of precision optical elements, subsurface defects seriously affect the performance of the elements, leading to the enhancement of light fields, an increase in laser absorption and an decrease in mechanical properties. It has become a key technology to realize the high-precision quantitative automatic detection of subsurface defects of optical elements. This paper presents a method of subsurface defect detection based on spectral confocal scattering measurement, the system adopts a dispersive lens group with the working band of 480–670 nm, and combines the spectral confocal technology and total internal reflection technology to effectively suppress the interference of scattered light on the surface, and can realize high-precision nondestructive detection without fluorescent substances. The axial resolution of this method is 0.8 μm and the measuring depth range is 0.94 mm. By building a measurement system and carrying out experimental verification, the results show that this method can accurately measure the depth and location of subsurface defects and confirm its feasibility and effectiveness.