Bone graft substitutes in orthopedic applications have to fulfill various demanding requirements. Most calcium phosphate (CaP) bone graft substitutes are highly porous to achieve bone regeneration, but typically lack mechanical stability. This study presents a novel approach, in which a scaffold structure with appropriate properties for bone regeneration emerges from the space between specifically shaped granules. The granule types were tetrapods (TEPO) and pyramids (PYRA), which were compared to porous CaP granules (CALC) and morselized bone chips (BC). Bulk materials of the granules were mechanically loaded with a peak pressure of 4 MP; i.e., comparable to the load occurring behind an acetabular cup. Mechanical loading reduced the volume of CALC and BC considerably (89% and 85%, respectively), indicating a collapse of the macroporous structure. Volumes of TEPO and PYRA remained almost constant (94% and 98%, respectively). After loading, the porosity was highest for BC (46%), lowest for CALC (25%) and comparable for TEPO and PYRA (37%). The pore spaces of TEPO and PYRA were highly interconnected in a way that a virtual object with a diameter of 150 µm could access 34% of the TEPO volume and 36% of the PYRA volume. This study shows that a bulk of dense CaP granules in form of tetrapods and pyramids can create a scaffold structure with load capacities suitable for the regeneration of an acetabular bone defect.
Gray cast iron (GJL) is known for its excellent damping property and high thermal conductivity, thanks to its unique lamellar graphite and pearlite structure. In a recent study, laser metal deposition (LMD) was explored as a potential process to enhance the corrosion resistance and wear mechanism of this tribological system. The focus was on laser cladding of gray cast iron using two different of stainless-steel materials, namely 430L and 316L, combined with TiC and WC particles. To create the samples, a multilayer coating system was employed. A comparative analysis of the microstructures was performed to understand the interaction of the laser beam with the material (composite materials). Surface properties were then characterized using light microscopy and electron microscopy (SEM) before and after subjecting the samples to a shock corrosion test, simulating automotive conditions. Additionally, phase analyses were performed at the interfaces between the coatings and the substrate, with particular attention given to the behavior of the graphite lamellae at these interfaces. This study aims to provide valuable insights into the potential improvements that can be achieved through laser cladding on gray cast iron, specifically in terms of corrosion resistance and wear mechanisms. By analyzing the microstructures and surface properties, researchers can gain a better understanding of the performance and durability of the coated samples.
1 November 2024 in Journal of Materials Research and Technology
Grey cast iron brake discs are widely used in automotive applications due to their excellent thermal and mechanical properties. However, stricter environmental regulations such as Euro 7 demand improved surface durability to reduce particulate emissions and corrosion-related failures. This study evaluates multilayer coatings fabricated by Laser Metal Deposition (LMD) as a potential solution. Two multi-layer systems were investigated: 316L + (316L + WC) and 316L + (430L + TiC), which were primarily reinforced with ceramic additives to increase wear resistance, with their influence on corrosion being critically evaluated. Electrochemical tests in 5 wt.% NaCl solution (DIN 17475) revealed that the 316L + (316L + WC) coating exhibited the lowest corrosion current density and most stable passive behavior, consistent with the inherent passivation of the austenitic 316L matrix. In contrast, the 316L + (430L + TiC) system showed localized corrosion associated with micro-galvanic interactions, despite the chemical stability of TiC particles. Post-corrosion SEM and EDS confirmed chromium depletion and chloride accumulation at corroded sites, while WC particles exhibited partial dissolution. These findings highlight that ceramic reinforcements do not inherently improve corrosion resistance and may introduce localized degradation mechanisms. Nevertheless, LMD-fabricated multilayer coatings demonstrate potential for extending brake disc service life, provided that matrix–reinforcement interactions are carefully optimized.
With time, the benefits of additive manufacturing have become firmly established in the domain of medical technology. The high degree of design freedom and precision afforded by additive manufacturing enables the production of implant components that are precisely tailored to individual requirements and based on patient-specific data. In addition to the advantages, the production of such components presents process-related material science challenges. One such challenge of this manufacturing process is the residual stresses due to the occurring phase transformation during the rapid process-related cooling rates. These stresses can lead to component deformation and impair the mechanical load-bearing capacity of the component, leading to accelerated fatigue. This aim of this study is to analyse the various influences of manufacturing and machining processes such as heat-treatment or application-related stress on the residual stress state of additively manufactured components based on titanium alloys.
Grey cast iron brake discs with lamellar graphite (GJL) offer excellent strength and thermal conductivity but are prone to wear and dust emissions. To mitigate these issues, a multilayer coating was applied via Laser Metal Deposition (LMD), comprising a 316L stainless steel base layer and a WC-reinforced top layer. This study examines the microstructural evolution of the coatings under simulated thermomechanical and corrosive conditions using a brake shock corrosion test. Microstructural characterization was performed via Scanning Electron Microscopy (SEM) and Electron Backscatter Diffraction (EBSD), focusing on grain size, orientation, and texture before and after testing. EBSD analysis revealed significant grain coarsening, with sizes increasing from below 20 µm to 30–60 µm, and a shift toward texture. Hardness measurements showed a reduction in the WC-reinforced layer from 478 HV to 432 HV and in the 316L base layer from 232 HV to 223 HV, confirming the influence of thermomechanical stress. SEM analysis revealed a transition from horizontal cracks—caused by residual stress during LMD—to vertical microcracks propagating from the substrate, activated by braking-induced loads. These findings provide insights into the microstructural response of LMD coatings under realistic service conditions and underscore the importance of grain boundary control in designing durable brake disc systems.