Hydrogen has been studied extensively as a potential enabler of the energy transition from fossil fuels to renewable sources. It promises a feasible decarbonisation route because it can act as an energy carrier, a heat source, or a chemical reactant in industrial processes. Hydrogen can be produced via renewable energy sources, such as solar, hydro, or geothermic routes, and is a more stable energy carrier than intermittent renewable sources. If hydrogen can be stored efficiently, it could play a crucial role in decarbonising industries. For hydrogen to be successfully implemented in industrial systems, its impact on infrastructure needs to be understood, quantified, and controlled. If hydrogen technology is to be economically feasible, we need to investigate and understand the retrofitting of current industrial infrastructure. Currently, there is a lack of comprehensive knowledge regarding alloys and components performance in long-term hydrogen-containing environments at industrial conditions associated with high-temperature hydrogen processing/production. This review summarises insights into the gaps in hydrogen embrittlement (HE) research that apply to high-temperature, high-pressure systems in industrial processes and applications. It illustrates why it is still important to develop characterisation techniques and methods for hydrogen interaction with metals and surfaces under these conditions. The review also describes the implications of using hydrogen in large-scale industrial processes.
Metal alloys and intermetallic compounds offer an attractive method for safely storing hydrogen (H2). The metal alloys absorb H2 into their structure, often swelling and fracturing as a result of phase transformation during hydride formation/decomposition cycles. The absorption of H2 is an exothermic process, requiring the effective and efficient removal of heat. This can be challenging as heat transfer to/from powdered beds is notoriously difficult, and often limited by poor thermal conductivity. Hence, the observed reaction kinetics for absorption and desorption of H2 is dominated by heat flow. The most common method for improving the thermal conductivity of the alloy powders is to prepare them into composite structures with other high thermal conductivity materials, such as carbons and expanded natural graphite. Such composite structures, some also combined with polymers/resins, can also mitigate safety issues related to swelling and improve cyclic durability. This paper reviews the methods that have been used to prepare such composite structures and evaluates the observed impact on thermal conductivity.
17 August 2017 in Canadian Metallurgical Quarterly
Evaluation and measurement of the influence of changes in conditions and electrolyte composition during early stages of a growing metal electrodeposit are crucial to predict changes in developing morphology. A galvanodynamic polarisation technique was developed to reliably measure overpotentials for nickel electrodeposition from sulphate electrolyte. The validity of these polarisation parameters as indicators of the relationships between changes in the electrolyte and resulting deposit morphology was evaluated for electrolytes of varying composition. Findings indicate that nucleation and plating overpotentials measured by the described technique can be used as indicative tools for monitoring, evaluating and ultimately improving control of the electrodeposition of nickel from sulphate electrolytes. The results predict that nickel deposits of desirable quality and morphology are obtained when plating overpotentials are higher than 700 mV vs. Ag/AgCl and nucleation overpotential is less negative than plating overpotential.
Hot-dip galvanized steel surfaces are cleaned, pre-treated with titanium-containing solution and then painted for use. Removal of the alumina layer from galvanized steel surfaces during the cleaning process is essential before effective paint application. Bad adhesion results if the alumina layer is not completely removed, and an insufficient concentration and uneven distribution of titanium oxide is formed across the galvanized surface during pre-treatment. The alkaline cleaner concentration must be optimized to ensure effective removal of the alumina layer. Hot-dip galvanized steel samples were cleaned using typical line conditions and cleaning solutions with varying free alkalinities. The alumina layer was then measured on each sample by glow-discharge optical emission spectroscopy. Thereafter, the samples were treated with titanium-containing pre-treatment solution. The titanium oxide concentration was measured by inductively coupled plasma optical emission spectroscopy. It was found that a free alkalinity of at least 3.2 mEq/L is required to fully remove the alumina layer. The alumina-free samples also gave a titanium oxide layer after pre-treatment within the target concentration of 4–8 mg/cm2. A free alkalinity of 3.5 ml was thereafter implemented commercially: analysis of samples from two galvanizing lines showed no presence of alumina, a uniform titanium oxide distribution across the widths of the line samples and acceptable titanium concentrations.
Knowledge of alloy behavior under industry-relevant conditions is critical to hydrogen production and processing, yet it is currently limited. To understand more about the impact of hydrogen damage on stainless steel 316 under realistic in-service conditions, we conducted a forensic investigation of two reactors exposed to various hydrogen-processing conditions. We examined samples of reactor walls exposed to hydrogen-containing atmospheres for >100 and ~1000 h at elevated temperatures during hydrogen separation and ammonia cracking. The samples were characterized by tensile testing, stretch–bend testing, and three-point bending. A loss in ductility and strength was observed for the reactor wall material compared with both untreated materials and materials annealed in neutral atmospheres at the same temperatures used during reactor operation. The three-point bend testing, which was conducted on inner and outer pipe-surface material extracted via electrical discharge machining, showed larger changes in the flexural modulus of exposed reactors but increases in the elastic limit. Microstructural observations revealed that hydrogen may play a role in stress relaxation, possibly promoting normalization at lower-than-expected temperatures. We also observed that materials exposed to ammonia undertake more damage from nitriding than from hydrogen.
Industries seeking to reduce carbon emissions are considering hydrogen as an alternative fuel or reductive reagent. However, the addition of hydrogen into new and existing infrastructure has triggered concerns for materials compatibility, forming a significant barrier to its implementation. Hydrogen is known to damage and embrittle metals, and despite growing efforts to generate compatibility data for structural materials under hydrogen environments, there is no consensus on how hydrogen degrades such material. This is due to the complex mechanisms in which hydrogen interacts with metals but more so the lack of standardised testing methods. Electrochemical methods are being used increasingly to generate hydrogen materials compatibility data. However, for industries to use electrochemical methods the conditions must be representative of those of gaseous hydrogen environments. Currently, when comparing mechanical properties by samples produced under gaseous and electrochemical environments, results show inconstancies in the mechanical properties produced and reliability issues. In this work, methods of electrochemical hydrogenation are reviewed in comparison to those under gaseous environments. Differences in the charging fugacity, surface effects and damage mechanisms are assessed between gaseous and electrochemical charging that may contribute to the disparities seen in the literature. Based on this comparative assessment, we identify key knowledge gaps and provide an approach for future research to address existing uncertainties.