Pyrometallurgical chlorination process has been employed for the recovery of elements from indium phosphide, InP, one of the important III–V semiconductor materials. It was found that both indium and phosphorous were converted to volatile species, indium chloride and phosphine, PH3, by thermal treatment of InP powder in the presence of ammonium chloride. However, the recovery as volatile compounds reached ∼60% at reaction temperature of 800°C. Based on these results we have employed the thermal treatment of the mixture of InP and iron powders. Phosphorous could be successfully converted to non-toxic iron phosphide, Fe3P. The consequent chlorination reaction resulted in the indium recovery of ∼100% in volatile form. The influence of reaction conditions, such as reaction temperature and composition of ammonium chloride, was examined.
In order to effectively recover Li from cathode active materials of lithium-ion batteries, model samples of LiCoO2 mixed with polyvinylidene fluoride (PVDF) were calcined at temperatures of 350–700 °C under an Ar or air atmosphere. Complete Li recovery was achieved by calcining the model sample at 400 °C under an Ar atmosphere, followed by water leaching. Additionally, to immobilize PVDF-derived F, an impurity in Li purification, we explored the use of calcium compounds (Ca(OH)2 and CaCO3) and a layered double hydroxide in both dry and wet processing methods. In the wet process, F was fixed by adding Ca(OH)2 to an aqueous LiF solution containing 1000 ppm of F. We confirmed that 98.6% of F was successfully removed from the solution after repeated fixation procedures. Furthermore, the unreacted Ca in the solution was separated and removed as CaCO3 by concentrating the solution.