This study aims to provide an accurate finite element (FE) modeling method for structural vibration serviceability evaluation of the suspended floor under human-induced excitation. The fundamental dynamic characteristics and human-induced vibration responses of a typical suspended floor were first measured via a series of field tests. Subsequently, the overall and local equivalent FE models of the suspended floor were respectively established, and their applicability was then verified by comparing the predicted dynamic characteristics and responses of the suspended floor with the corresponding field test results. Finally, passive tuned mass dampers (TMDs) were designed for vibration control of the suspended floor using the local equivalent FE model, and the applicability of the local FE model in assessing the vibration serviceability of the suspended floor with TMDs was further confirmed via pedestrian-induced vibration tests. Results demonstrate that the simplified local equivalent FE model proposed in this study can well replace the complicated overall FE model to evaluate the vibration serviceability of the suspended floor with and without TMDs.
High-rise flue gas desulfurization towers are susceptible to wind loads, which can cause instability and failure in the along-wind and across-wind directions. The tuned mass damper (TMD) has been widely applied in the wind-induced vibration control of high-rise structures. To enhance the control performance and reduce the auxiliary mass of TMD, this study focuses on inerter-based dynamic vibration absorbers (IDVAs) for controlling the vibration response of a desulfurization tower. The dynamical equations of the tower–IDVA systems are established under wind loads, and a parameter optimization strategy for IDVAs is proposed by using the genetic algorithm. The performance of the traditional TMD and six IDVAs in the vibration control of the tower are systematically compared. Numerical simulations demonstrate that both the TMD and IDVAs can substantially mitigate the vibration response of the tower. However, compared to the TMD with the same response mitigation ratio, more than 34% of the auxiliary mass can be reduced by two optimal IDVAs. In addition, the energy dissipation enhancement and lightweight effect of the two IDVAs are explained through parametric studies.