Solid waste landfills are responsible for much of the anthropogenic methane emitted from the waste sector. The quantification of fugitive CH4 emissions from a landfill is to date characterised by high uncertainty and several methodologies have been devised to estimate emission fluxes. Unmanned Aerial Vehicles (UAVs, also known as drones) are revolutionising the way CH4 emission monitoring is conceived and offer new opportunities for quantifying emission fluxes from a landfill, mainly due to recent advances in sensor miniaturisation that make these instruments lighter and more suitable to be equipped on a drone. The paper analyses publications from the period 2014-2024 that illustrate UAV-based methods that can be used for this purpose, identifying experiences in the field and the current state of research. The review has highlighted a current research status characterised by a strong experimental focus, with few tests carried out in landfills under real emission conditions (33 % of the reviewed papers). Since 2018, there has been a growing interest in open-path sensors, tested in some controlled-release experiments according to different configurations which have given promising results, but experiences are limited and there are no experiments conducted directly in landfills. In general, the UAV-based methods identified by this systematic review are characterised by unclear uncertainties. Drones are a viable alternative to traditional monitoring methods at landfills and allow data to be acquired with a spatial and temporal resolution that can hardly be achieved by other low-cost methods. However, further studies and field trials are needed to better understand methodological aspects: especially the uncertainty of each step in the quantification process need to be properly analysed and quantified more precisely.
An accurate measurement of anthropogenic methane emissions is essential for improving the representation of greenhouse gas inventories and for mitigating the effects of climate change. Often, theoretical models overestimate actual emission values, while field measurements tend to be costly and/or labour-intensive. Landfills represent an important emission sector, necessitating continued investment in innovation and technology to limit fugitive emissions, particularly of methane. This study presents a novel method based on a mass balance approach to estimate fugitive methane emissions from landfills and has been tested at a solid waste landfill in Italy. Measurements were acquired using a drone equipped with a sensor, completed in just a few minutes and processed directly in the field. Results from two tests conducted a month apart are provided, each consisting of two downwind flights at the site. Emission rates varied from 320 ± 280 mg m-2h-1 to 578 ± 385 mg m-2h-1. The data was subsequently compared with the results obtained using the flux chamber method during the second test, highlighting values that were 2 to 4 times higher than those from the ground-based method. The findings of this study highlight the potential of UAV-based methodologies for measuring methane emissions compared to traditional methods. The speed of execution and processing is indeed crucial to providing accurate data and optimising both timings and flight models during an investigation.
Quantifying methane (CH4) emissions is essential for climate change mitigation; however, current estimation methods often suffer from substantial uncertainties, particularly at the site level. This study introduces a drone-based approach for measuring CH4 emissions using an open-path Tunable Diode Laser Absorption Spectroscopy (TDLAS) sensor mounted parallel to the ground, rather than in the traditional nadir-pointing configuration. Controlled CH4 release experiments were conducted to evaluate the method’s accuracy, employing a modified mass-balance technique to estimate emission rates. Two wind data processing strategies were compared: a logarithmic wind profile (LW) and a constant scalar wind speed (SW). The LW approach yielded highly accurate results, with an average recovery rate of 98%, while the SW approach showed greater variability with increasing distance from the source, although it remained reliable in close proximity. The method demonstrated the ability to quantify emissions as low as 0.08 g s−1 with approximately 4% error, given sufficient sampling. These findings suggest that the proposed UAV-based system is a promising, cost-effective tool for accurate CH4 emission quantification in sectors, such as agriculture, energy, and waste management, where traditional monitoring techniques may be impractical or limited.
The effective management of landfills requires advancements in techniques for rapid data collection and analysis of gas emissions. This work aims to refine methane (CH4) emission data acquired from landfills by applying a robust geostatistical method to drone-collected measurements. Specifically, we use UAV-mounted laser spectrophotometer technology (TDLAS-UAV) to gather rapid, high-resolution data, which can sometimes be noisy due to atmospheric variations and sensor drift. For data handling, the key innovation is the application of the local indicator of spatial association (LISA), a technique that typically provides p-values to assess the statistical significance of observed spatial clusters. This approach was applied both on an areal basis and on a linear basis, following the order of data acquisition, and it produced comparable results. Very low p-values are considered indicative of non-random clustering, suggesting the influence of an underlying spatial control factor. These results were subsequently validated through independent flux chamber surveys. This validation confirms the reliability and objectivity of our geostatistical method in improving drone-based methane emission assessments. The research highlights the need to optimize drone flight paths to ensure a uniform spatial distribution of data and reduce edge effects. It notes that many CH4 flux measurements often yield non-detectable results, suggesting a review of detection limits. Future work should refine UAV flight patterns and data processing with semi-controlled experiments—using known methane sources—to determine optimal acquisition parameters, such as flight height, sampling frequency, grid resolution, and wind influence.
Methane (CH4) is a potent greenhouse gas, and accurate facility-scale monitoring is essential for targeted mitigation. Current methods often rely on stationary sensors, which have limited sampling density and may fail to capture short-term or spatial variability in emission plumes. Drone-based monitoring has gained increasing attention, but most applications use point sensors. Open-path sensors mounted on drones offer higher data density and spatially integrated concentration measurements, yet their use for quantitative emission estimation remains poorly explored - particularly in associating integrated concentrations with wind data for mass-balance approaches. To address this gap, a combined methodology of numerical simulations and field campaigns was employed at three Italian sites - a landfill, a cattle farm, and a natural gas compression facility - to evaluate how different wind-averaging strategies influence emission estimates, providing novel insights into the reliability of drone-based open-path approaches. Simulations with WindTrax 2.0 showed that under stable conditions, emission estimates are more reproducible and easier to correct with models or empirical factors, though less precise in absolute terms. Comparing two wind averaging approaches - over the entire air column versus only the plume-intersected portion - demonstrated that averaging within the plume yields more stable results with narrower uncertainty intervals. Averaging over the entire column systematically overestimated fluxes, reaching 130 % at the compression facility, 116 % at the landfill, and 108 % at the farm. A third approach, averaging wind between successive transects, further improved stability, precision, and agreement with computational models. These findings highlight the potential of drone-based open-path systems for facility-level CH4 monitoring, overcoming the sampling-density limitations of point sensors. Careful calibration and optimisation of wind models improve estimate reliability, with the best-performing approach in this study achieving an error of just 11 % relative to expected values. Overall, this demonstrates that appropriate treatment of wind data enables robust and repeatable CH4 quantification across multiple types of facilities, providing a practical framework for accurate emission monitoring.