This paper focuses on adaptive velocity compensation along state axis aiming at dent and friction force ripples using parameterized iterative learning control (ILC) for permanent magnet linear synchronous motor (PMLSM) executing same control instruction repeatedly. Velocity ripples are primarily attributed to periodic disturbances such as dent force and the gliding friction in PMLSM. The dent force consists of end effect and cogging effect forces. The key idea of this disturbance compensation method is to use past information for one trajectory period along state axis to update current adaptation law. The new method consists of three different steps: in first repetitive trajectory, an adaptive compensator is designed to guarantee the L2-stability of overall system; from second repetitive trajectory onwards, a trajectory-periodic adaptive ILC compensator stabilizes the system; and to make use of the stored past state-periodic ripple force information, a search process is utilized for adapting current controller coefficient. As a consequence, the velocity pulsation is reduced significantly. The proposed approach is evaluated by experiment, which validates its effectiveness.
6 December 2024 in Journal of Intelligent & Robotic Systems
The present study focuses on the simultaneous localization and mapping (SLAM) system based on point and line features. Aiming to address the prevalent issue of repeated detection during line feature extraction in low-texture environments, a novel method for merging redundant line features is proposed. This method effectively mitigates the problem of increased initial pose estimation error that arises when the same line is erroneously detected as multiple lines in adjacent frames. Furthermore, recognizing the potential for the introduction of line features to prolong the marginalization process of the information matrix, optimization strategies are employed to accelerate this process. Additionally, to tackle the issue of insufficient point feature accuracy, subpixel technology is introduced to enhance the precision of point features, thereby further reducing errors. Experimental results on the European Robotics Challenge (EUROC) public dataset demonstrate that the proposed LR-SLAM system exhibits significant advantages over mainstream SLAM systems such as ORB-SLAM3, VINS-Mono, and PL-VIO in terms of accuracy, efficiency, and robustness.
Iterative learning control (ILC) algorithm using wavelet approximation is adopted to improve trajectory-tracking performance of permanent magnet linear synchronous motors (PMLSM). The algorithm approximates the unknown nonlinearities of PMLSM by wavelet transform whose approximated coefficients are iteratively adjusted by learning. The sliding mode variable structure control strategy with dead zone is adopted to ensure the robust convergence. The simulation results show that errors between the actual and optimal wavelet coefficients are monotonically decreased with iterations. The proposed scheme overcomes the influences of detent force of PMLSM.
Cooperative rendezvous between the autonomous surface vehicle (ASV) and uncrewed underwater vehicle (UUV) constitutes a core support for the marine Internet of Things (MIoT). However, the communication between two vehicles is vulnerable to denial-of-service (DoS) attacks, which may lead to rendezvous failure. To address this challenge, this study develops a safe resilient rendezvous control method with dynamic event-triggered mechanism. An adaptive neural parameter compression algorithm is incorporated to approximate heterogeneous system uncertainties and external disturbances with fewer adaptive parameters, effectively alleviating computational burdens. To further ensure a safe rendezvous, a prescribed performance control (PPC)-based scheme is proposed to regulate the UUV’s ascending trajectory, thereby facilitating a smooth ascent. Considering that communication between the ASV and UUV may be disrupted by DoS attacks, a second-order resilient filter is proposed to estimate the unavailable virtual leader states in real time. To optimize onboard communication usage, a dynamic event-triggered mechanism is embedded within the control design, enabling a more flexible control for cooperative rendezvous. The closed-loop stability is provided under DoS attacks, with simulation results and comparisons demonstrating the effectiveness of the proposed rendezvous approach.