The Prague Asterix Laser System (PALS) is a new international laboratory where research teams are invited to compete for the beam time. The PALS Center runs an iodine photodissociation high-power laser system delivering up to 1.2 kJ of energy in ∼400 ps pulses at the wavelength of 1.315 μm. Optional doubling and tripling of the frequency is assured by large-diameter nonlinear crystals. The ASTERIX IV laser [H. Baumhacker et al., Appl. Phys. B 61, 325 (1995)], transferred from Garching into a new laser hall in Prague, was updated and put into operation on 8 June 2000. These upgrades include new beam delivery options and a twin interaction chamber, which is designed flexibly for a broad spectrum of applications. Results of the first series of experiments are presented and some planned upgrades are briefly described. These include implementation of adaptive optics, replacement of the iodine master oscillator by a more flexible solid state oscillator based on fiber optics, and a femtosecond extension of the laser output to reach the petawatt pulse power region.

Nanostructured thin plastic foils have been used to enhance the mechanism of laser-driven proton beam acceleration. In particular, the presence of a monolayer of polystyrene nanospheres on the target front side has drastically enhanced the absorption of the incident 100 TW laser beam, leading to a consequent increase in the maximum proton energy and beam charge. The cutoff energy increased by about 60% for the optimal spheres’ diameter of 535 nm in comparison to the planar foil. The total number of protons with energies higher than 1 MeV was increased approximately 5 times. To our knowledge this is the first experimental demonstration of such advanced target geometry. Experimental results are interpreted and discussed by means of $2\frac{1}{2}$-dimensional particle-in-cell simulations.

We report efficient and stable operation of the first multi-joule diode pumped solid state laser delivering 1 kW average power in 105 J, 10 ns pulses at 10 Hz, confirming the power scalability of multi-slab cryogenic gas-cooled amplifier technology.

In this paper, we establish connections between the thresholds and mechanisms of the damage and white-light generation upon femtosecond laser irradiation of wide-bandgap transparent materials. On the example of Corning Willow glass, evolution of ablation craters, their quality, and white-light emission were studied experimentally for 130-fs, 800-nm laser pulses. The experimental results indicate co-existence of several ablation mechanisms which can be separated in time. Suppression of the phase explosion mechanism of ablation was revealed at the middle of the irradiation spots. At high laser fluences, air ionization was found to strongly influence ablation rate and quality and the main mechanisms of the influence are analysed. To gain insight into the processes triggered by laser radiation in glass, numerical simulations have been performed with accounting for the balance of laser energy absorption and its distribution/redistribution in the sample, including bremsstrahlung emission from excited free-electron plasma. The simulations have shown an insignificant role of avalanche ionization at such short durations of laser pulses while pointing to high average energy of electrons up to several dozens of eV. At multi-pulse ablation regimes, improvement of crater quality was found as compared to single/few pulses.

We review the progress in the investigation of the Verdet constant of new magneto-active materials for the Faraday-effect-based devices used in high-power laser systems. A practical methodology for advanced characterization of the Verdet constant of these materials is presented, providing a useful tool for benchmarking the new materials. The experimental setup used for the characterization is a flexible and robust tool for evaluating the Faraday rotation angle induced in the magneto-active material, from which the Verdet constant is calculated based on the knowledge of the magnetic field and the material sample parameters. A general model for describing the measured Verdet constant data as a function of wavelength and temperature is given. In the final part of this review, we present a brief overview of several magneto-active materials, which have been to-date reported as promising candidates for utilization in the Faraday devices. This overview covers room-temperature investigations of the Verdet constant of several materials, which could be used for the ultraviolet, visible, near-infrared and mid-infrared wavelengths.