Lukáš Koláčný

Mr. Lukáš Koláčný


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
MPMartina Pitínová
Martina Pitínová
IDIryna Danylo
Iryna Danylo
ASAyesha Shafiq
Ayesha Shafiq
THTomáš Hartman
Tomáš Hartman
MKMariia Khover
Mariia Khover
Martin VeselyMartin Vesely
Martin Vesely
This study explores the selective hydrogenation of cinnamaldehyde using a series of metal catalysts supported on reduced graphene oxide (rGO) and conventional activated carbon (AC). Catalysts based on Pt, Pd, Rh, Ru, and Co were synthesized with controlled metal loading and characterized by XRD, SEM-EDS, XRF, and TEM. Among all tested materials, Pd supported on rGO synthesized via the Tour method (Pd/rTOGO) exhibited the highest catalytic activity, achieving 62% conversion of cinnamaldehyde and superior selectivity toward hydrocinnamaldehyde (HCAL). The support material had a significant influence on performance, especially for Pd catalysts, where 2D rGO outperformed 3D AC in both conversion and selectivity. In contrast, other metals (Pt, Rh, Ru, Co) showed only modest activity and limited selectivity tuning via support choice. Notably, GC-MS analysis revealed the formation of a previously underreported side product, 3-isopropoxy-propan-1-yl benzene (ether), likely formed via reductive etherification in isopropanol. The combined kinetic and selectivity data enabled the proposal of reaction pathways, including rapid transformation of cinnamylalcohol (COL) to hydrocinnamal alcohol (HCOL) and HCAL to ether. These findings emphasize the importance of support structure and surface functionality, particularly in 2D carbon materials, for designing efficient and selective hydrogenation catalysts.

10 February 2025 in Nanoscale Advances
Verified
Journal Article
Open access
PDF file
IDIryna Danylo
Iryna Danylo
LKLukáš Koláčný
Lukáš Koláčný
KKKristína Kissíková
Kristína Kissíková
THTomáš Hartman
Tomáš Hartman
MPMartina Pitínová
Martina Pitínová
Martin VeselyMartin Vesely
Martin Vesely
Direct electron beam lithography is studied for targeted platinum nanoparticle deposition onto 2D supports, which allows an evaluation of the unique influence of nanoparticle–support interactions on enhanced catalytic activity.

7 January 2026 in EES Catalysis
Verified
Journal Article
Open access
PDF file
JBJan Dismas Buriánek
Jan Dismas Buriánek
MPMartin Prokop
Martin Prokop
TBTomas Bystron
Tomas Bystron
Martin VeselyMartin Vesely
Martin Vesely
LKLukáš Koláčný
Lukáš Koláčný
KBKarel Bouzek
Karel Bouzek
In the emerging hydrogen energy economy, proton-exchange membrane fuel cells (PEMFCs) serve as a key enabling technology, yet their cost is among other things dominated by platinum group metals-based cathode catalysts. This paper is focused on investigation of intermetallic Pt-Co and Pt-Ni nanoparticles supported on carbon (Ketjen Black, reduced graphene oxide) as low-Pt-load candidates for high-temperature PEMFCs (HT-PEMFCs) operated at elevated temperature ~180 °C in the presence of concentrated phosphoric acid. Catalytic activity toward the oxygen reduction reaction (ORR) was quantified by rotating electrode measurements (exchange current densities, Tafel slopes), and stability was probed by leaching in 97.6 wt.% H3PO4 at 180 °C followed by post-exposure characterization. A suite of techniques – XAS, XRD, TEM/EDS, XRF, Raman spectroscopy and ICP-OES – was used to study changes composition and structure during degradation. All alloy catalysts showed in HClO4 at 25 °C higher ORR activity than commercial Pt/C. However, exposure to concentrated H3PO4 at 180 °C caused electrochemically active surface area loss, reduced ORR activity, Pt crystallite growth, Co/Ni dissolution, and surface reorganisation. Comparatively, reduced graphene oxide-supported catalyst was more resistant to ripening and dealloying than its Ketjen Black analogue, and Pt–Ni alloy was more stable than Pt–Co. Overall, the results disentangle the roles of the carbon support and alloy composition and outline activity – stability trade-offs that guide the design of low-Pt loading cathodes for HT-PEMFCs.

2 July 2025 in 2D Materials
Verified
Journal Article
Open access
BRBorna Radatovic
Borna Radatovic
FLFedor Lipilin
Fedor Lipilin
ASAmutha Subramani
Amutha Subramani
ASAljoscha Söll
Aljoscha Söll
KMKseniia Mosina
Kseniia Mosina
ZSZdeněk Sofer
Zdeněk Sofer
Antimony-based 2D materials are one of the leading post-graphene materials, as they are promising for various applications due to their customizable properties and versatile synthesis methods, allowing an exceptional degree of control in developing 2D devices. We have investigated Sb2S2O-based photodetectors, demonstrating photoresponsivity in the UV-Vis spectrum. We have inspected the material and device's structural, chemical and optical properties, with the determined Sb2S2O bandgap of 2.04 eV with sub-bandgap emissions, which we correlate with obtained device performances. The reported best device responsivity is relatively high at 1.7 A/W, with a relatively low response time of 500 ms, indicating a photogating mechanism dominated nature, confirmed by the sublinear power dependence of photoresponsivity. Additionally, we have demonstrated the ambient stability of Sb2S2O, showing that it can function without needing protective top coatings. This opens up possibilities for surface functionalization and further optimization of the device. We also observed a distinct anisotropy in its Raman spectra, most prominent for the mid-frequency peak corresponding to Sb-O stretching modes and the peaks from interlayer interactions, expanding the potential applications of Sb2S2O in polarization-sensitive electronic devices.

11 June 2024 in Chemosensors
Verified
Journal Article
Open access
PDF file
JJJitrenka Jiru
Jitrenka Jiru
VHVojtech Hybasek
Vojtech Hybasek
Alena MichalcováAlena Michalcová
Alena Michalcová
KKKlára Korbelová
Klára Korbelová
LKLukáš Koláčný
Lukáš Koláčný
JFJaroslav Fojt
Jaroslav Fojt
Electrochemical pH sensors have a wide range of industrial applications such as in medicine due to their fast response and high sensitivity to pH changes. This work focuses on the preparation of samples based on the nanostructure of TiO2 with potentiostatically deposited particles of iridium and its oxides (IrO2), using a Ti-6Al-4V alloy as the base material, and subsequent surface characterization. Transmission electron microscopy and secondary ion mass spectroscopy showed Ir particles distributed in the nanotubes. Using a potentiostatic method, a stable pH sensor was prepared. By monitoring the open circuit potential, it was shown that this sensor is usable even without being kept in a storage medium and does not react to changes in the redox potential of the solution.

18 March 2026 in Catalysis Science & Technology
Verified
Journal Article
Open access
PDF file
ASAyesha Shafiq
Ayesha Shafiq
IDIryna Danylo
Iryna Danylo
LKLukáš Koláčný
Lukáš Koláčný
BSBerke Sevemez
Berke Sevemez
JLJan Luxa
Jan Luxa
MPMartina Pitínová
Martina Pitínová
Catalytic hydrogenation of cinnamaldehyde over Pt NP-decorated TMDs.