Lithium silicate (Li4SiO4) material can be applied for CO2 capture in energy production processes, such as hydrogen plants, based on sorption-enhanced reforming and fossil fuel-fired power plants, which has attracted research interests of many researchers. However, CO2 absorption performance of Li4SiO4 material prepared by the traditional solid-state reaction method is unsatisfactory during the absorption/regeneration cycles. Improving CO2 absorption capacity and cyclic stability of Li4SiO4 material is a research highlight during the energy production processes. The state-of-the-art kinetic and quantum mechanical studies on the preparation and CO2 absorption process of Li4SiO4 material are summarized, and the recent studies on the effects of preparation methods, dopants, and operating conditions on CO2 absorption performance of Li4SiO4 material are reviewed. Additionally, potential research thoughts and trends are also suggested.
Pyrolysis is a promising process to convert municipal waste into fuels in solid, liquid or gaseous forms or value-added chemicals. The composition of pyrolysis products is affected by many factors, among which the configuration of the pyrolysis reactor is one of the essential parameters, as it influences the heat transfer, mass transfer, residence time of the reaction intermediates, interaction of the volatiles, etc. Up to now, there are varied types of pyrolysis reactors including the rotary-kiln, fixed-bed, batch and semi-batch, fluidized-bed, tubular, plasma and microwave that have been used in the pyrolysis of municipal waste. Each type of reactor has its own configuration and affects the pyrolysis process of municipal waste in distinct ways. There is a necessity for revisiting the progress of the investigation of the characteristics of the pyrolysis of municipal waste in different types of reactors, especially in terms of the kinetics of pyrolysis and the distribution of products. In addition, the techno-economic aspects of the pyrolysis of municipal waste in varied types of reactors are discussed, aiming to assess the potential for large-scale or commercial applications.
The intermittent and inconsistent nature of some renewable energy, such as solar and wind, means the corresponding plants are unable to operate continuously. Thermochemical energy storage (TES) is an essential way to solve this problem. Due to the advantages of cheap price, high energy density, and ease to scaling, CaO-based material is thought as one of the most promising storage mediums for TES. In this paper, TES based on various cycles, such as CaO/CaCO3 cycles, CaO/Ca(OH)2 cycles, and coupling of CaO/Ca(OH)2 and CaO/CaCO3 cycles, were reviewed. The energy storage performances of CaO-based materials, as well as the modification approaches to improve their performance, were critically reviewed. The natural CaO-based materials for CaO/Ca(OH)2 TES experienced the multiple hydration/dehydration cycles tend to suffer from severe sintering which leads to the low activity and structural stability. It is found that higher dehydration temperature, lower initial sample temperature of the hydration reaction, higher vapor pressure in the hydration reactor, and the use of circulating fluidized bed (CFB) reactors all can improve the energy storage performance of CaO-based materials. In addition, the energy storage performance of CaO-based materials for CaO/Ca(OH)2 TES can be effectively improved by the various modification methods. The additions of Al2O3, Na2Si3O7, and nanoparticles of nano-SiO2 can improve the structural stabilities of CaO-based materials, while the addition of LiOH can improve the reactivities of CaO-based materials. This paper is devoted to a critical review on the development on thermochemical energy storage based on CaO-based materials in the recent years.