ShiJun Hao

Dr. ShiJun Hao

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2024 in Sensors
Verified
Journal Article
Open access
PDF file
ZGZhe Guo
Zhe Guo
Bing YangBing Yang
Bing Yang
KWKaiwei Wu
Kaiwei Wu
Yanbin LiangYanbin Liang
Yanbin Liang
ShiJun HaoShiJun Hao
ShiJun Hao
ZHZhonghua Huang
Zhonghua Huang
In the environment of smoke and suspended particles, the accurate detection of targets is one of the difficulties for frequency-modulated continuous-wave (FMCW) laser fuzes to work properly in harsh conditions. To weaken and eliminate the significant influence caused by the interaction of different systems in the photon transmission process and the smoke particle environment, it is necessary to increase the amplitude of the target echo signal to improve the signal-to-noise ratio (SNR), which contributes to enhancing the detection performance of the laser fuze for the ground target in the smoke. Under these conditions, the particle transmission of photons in the smoke environment is studied from the perspective of three-dimentional (3D) collisions between photons and smoke particles, and the modeling and Unity3D simulation of FMCW laser echo signal based on 3D particle collision is conducted. On this basis, a laser fuze structure based on multiple channel beam emission is designed for the combined effect of particle features from different systems and its impact on the target characteristics is researched. Simulation results show that the multiple channel laser emission enhances the laser target echo signal amplitude and also improves the anti-interference ability against the combined effects of multiple particle features compared with the single channel. Through the validation based on the laser prototype with four-channel beam emitting, the above conclusions are supported by the experimental results. Therefore, this study not only reveals the laser target properties under the 3D particle collision perspective, but also reflects the reasonableness and effectiveness of utilizing the target characteristics in the 3D particle collision mode to enhance the detection performance of FMCW laser fuze in the smoke.

17 July 2024 in Entropy
Verified
Journal Article
Open access
PDF file
KWKaiwei Wu
Kaiwei Wu
Bing YangBing Yang
Bing Yang
ShiJun HaoShiJun Hao
ShiJun Hao
Yanbin LiangYanbin Liang
Yanbin Liang
ZHZhonghua Huang
Zhonghua Huang
The increasingly complex electromagnetic environment of modern warfare and the proliferation of intelligent jamming threaten to reduce the survival rate of radio fuzes on the battlefield. Radio frequency (RF) stealth technology can fundamentally improve the anti-interception and reconnaissance capabilities of radio fuzes, thereby lessening the probability of them being intercepted, recognized, and jammed by the enemy. In this paper, an RF stealth waveform based on chaotic pulse-position modulation is proposed for ultra-wideband (UWB) radio fuzes. Adding a perturbation signal based on the Tent map ensures that the chaotic sequences have sufficiently long periods despite hardware byte limitations. Measuring the approximate entropy and sequence period shows that the Tent map with the addition of perturbation signals can maintain good randomness under byte constraints, closely approximating the Tent map with ideal precision. Simulations verify that the proposed chaotic mapping used to modulate the pulse position of an ultra-wideband radio fuze signal results in superior detection, anti-interception, and anti-jamming performance.

14 August 2025 in Sensors
Verified
Journal Article
Open access
PDF file
Yanbin LiangYanbin Liang
Yanbin Liang
KWKaiwei Wu
Kaiwei Wu
Bing YangBing Yang
Bing Yang
ShiJun HaoShiJun Hao
ShiJun Hao
ZHZhonghua Huang
Zhonghua Huang
In ultra-wideband (UWB) radio fuze architectures, the receiver serves as the core component for receiving target-reflected signals, with its performance directly determining system detection accuracy. Manufacturing tolerances and operational environments induce inherent stochastic perturbations in circuit components, causing deviations of actual parameters from nominal values. This consequently degrades the signal-to-noise ratio (SNR) of receiver outputs and compromises ranging precision. To overcome these limitations and identify critical sensitive components in the receiver, this study proposes the following: (1) A dual-channel time-domain correlated UWB fuze detection model; and (2) the integration of an asymmetric tolerance mathematical model for dual-channel correlated receivers with a Morris-LHS-Sobol collaborative strategy to quantify independent effects and coupling interactions across multidimensional parameter spaces. Simulation results demonstrate that integrating capacitors and resistors constitute the dominant sensitivity sources, exhibiting significantly positive synergistic effects. Physical simulation correlation and hardware circuit verification confirms that the proposed model and sensitivity analysis method outperform conventional approaches in tolerance resolution and allocation optimization, thereby advancing the theoretical characterization of nonlinear coupling effects between parameters.

11 February 2026 in Sensors
Verified
Journal Article
Open access
PDF file
Yanbin LiangYanbin Liang
Yanbin Liang
KWKaiwei Wu
Kaiwei Wu
Bing YangBing Yang
Bing Yang
ShiJun HaoShiJun Hao
ShiJun Hao
ZHZhonghua Huang
Zhonghua Huang
Component tolerances in Ultra-Wideband (UWB) fuze transmitters inevitably induce waveform distortions, which propagate through the signal chain to degrade system-level tactical performance, specifically detection range and ranging resolution. Addressing the lack of quantitative mechanisms linking component variations to operational effectiveness, this study proposes an information-theoretic sensitivity analysis framework. First, we establish a physics-based mathematical model of the transmitter and rigorously validate it against circuit-level simulations to characterize the step recovery diode’s transient response under tolerance disturbances. Second, we employ the Latin Hypercube Sampling-Information Entropy (LHS-IE) method to quantify the uncertainty propagation from parameters to pulse features. Crucially, we introduce Feature Interaction Information (FII) to decode the nonlinear coupling between components. Our results reveal a strong Amplifying effect driven by inductance tolerances, where the interaction between parameters amplifies the joint uncertainty of amplitude and width beyond their individual impacts. Conversely, load resistance primarily dictates amplitude uncertainty as an independent linear factor. The proposed framework provides a theoretical basis for converting traditional tolerance design into an entropy-driven precision allocation strategy, ensuring system robustness under manufacturing constraints.

19 September 2025 in Entropy
Verified
Journal Article
Open access
PDF file
KWKaiwei Wu
Kaiwei Wu
ShiJun HaoShiJun Hao
ShiJun Hao
Yanbin LiangYanbin Liang
Yanbin Liang
Bing YangBing Yang
Bing Yang
ZHZhonghua Huang
Zhonghua Huang
In ultra-wideband (UWB) radio fuzes, the signal processing unit’s capability to rapidly and accurately extract target characteristics under battlefield conditions directly determines detonation precision and reliability. Escalating electronic warfare creates complex electromagnetic environments that compromise UWB fuze reliability through false alarms and missed detections. This study pioneers a novel signal processing architecture. The framework integrates: (1) fixed-parameter Least Mean Squares (LMS) front-end filtering for interference suppression; (2) One-Dimensional Convnlutional Neural Network (1D-CNN) recognition trained on One-Dimensional Conditional Generative Adversarial Network (1D-CGAN)-augmented datasets. Validated on test samples, the system achieves 0% false alarm/miss detection rates and 97.66% segment recognition accuracy—representing a 5.32% improvement over the baseline 1D-CNN model trained solely on original data. This breakthrough resolves energy-threshold detection’s critical vulnerability to deliberate jamming while establishing a new technical framework for UWB fuze operation in contested spectra.

5 November 2025 in Sensors
Verified
Journal Article
Open access
PDF file
Bing YangBing Yang
Bing Yang
KWKaiwei Wu
Kaiwei Wu
Yanbin LiangYanbin Liang
Yanbin Liang
ShiJun HaoShiJun Hao
ShiJun Hao
ZHZhonghua Huang
Zhonghua Huang
The dynamic variation of the incidence angle between the millimeter-wave (MMW) fuzes and non-spherical raindrops significantly affects detection performance. To address this issue, the influence of incidence angle on attenuation coefficient, volume reflectivity, and the signal-to-clutter-plus-noise ratio (SCNR) is systematically analyzed by employing the realistic raindrop morphology described by the Beard and Chuang (BC) model and the invariant imbedding (IIM) T-matrix method. By integrating worst-case analysis, the critical incidence angle corresponding to the most severe performance degradation is identified, and the corresponding attenuation coefficient, volume reflectivity, and SCNR values are reconstructed. Numerical simulations demonstrate that for the BC model, the most severe impact on MMW signal propagation occurs at an incidence angle of 180°. Under this condition, the reconstructed attenuation coefficient and volume reflectivity increase by 45.88% and 28.27%, respectively, while the SCNR decreases by 27.35% at 60 GHz operating frequency and 100 mm/h rainfall rate, compared to the spherical raindrop model. This study provides a theoretical basis for calibrating design margins and optimizing anti-interference strategies for MMW fuzes operating in complex meteorological conditions.