The laser transmitter and photoelectric receiver are the core modules of the detector in a laser proximity fuse, whose performance variability can affect the accuracy of target detection and identification. In particular, there is no study on the effect of detector’s component performance variability on frequency-modulated continuous-wave (FMCW) laser fuse under smoke interference. Therefore, based on the principles of particle dynamic collision, ray tracing, and laser detection, this paper builds a virtual simulation model of FMCW laser transmission with the professional particle system of Unity3D, and studies the effect of performance variability of laser fuse detector components on the target characteristics under smoke interference. Simulation results show that the difference in the performance of the fuse detector components causes the amplitude variation and peak migration of the beat signal spectrum, and the change in the visibility of the smoke can also affect the results, which indicates that the factors affecting the signal-to-noise ratio (SNR) of the echo signal are related to the smoke interference and performance variability of the detector. The proposed simulation model is supported by experimental results, which reflect the reliability of the proposed findings. Therefore, this study can be used for the optimization of the parameters in the laser fuse antismoke interference to avoid false alarms.
The increasingly complex electromagnetic environment of modern warfare and the proliferation of intelligent jamming threaten to reduce the survival rate of radio fuzes on the battlefield. Radio frequency (RF) stealth technology can fundamentally improve the anti-interception and reconnaissance capabilities of radio fuzes, thereby lessening the probability of them being intercepted, recognized, and jammed by the enemy. In this paper, an RF stealth waveform based on chaotic pulse-position modulation is proposed for ultra-wideband (UWB) radio fuzes. Adding a perturbation signal based on the Tent map ensures that the chaotic sequences have sufficiently long periods despite hardware byte limitations. Measuring the approximate entropy and sequence period shows that the Tent map with the addition of perturbation signals can maintain good randomness under byte constraints, closely approximating the Tent map with ideal precision. Simulations verify that the proposed chaotic mapping used to modulate the pulse position of an ultra-wideband radio fuze signal results in superior detection, anti-interception, and anti-jamming performance.
In the environment of smoke and suspended particles, the accurate detection of targets is one of the difficulties for frequency-modulated continuous-wave (FMCW) laser fuzes to work properly in harsh conditions. To weaken and eliminate the significant influence caused by the interaction of different systems in the photon transmission process and the smoke particle environment, it is necessary to increase the amplitude of the target echo signal to improve the signal-to-noise ratio (SNR), which contributes to enhancing the detection performance of the laser fuze for the ground target in the smoke. Under these conditions, the particle transmission of photons in the smoke environment is studied from the perspective of three-dimentional (3D) collisions between photons and smoke particles, and the modeling and Unity3D simulation of FMCW laser echo signal based on 3D particle collision is conducted. On this basis, a laser fuze structure based on multiple channel beam emission is designed for the combined effect of particle features from different systems and its impact on the target characteristics is researched. Simulation results show that the multiple channel laser emission enhances the laser target echo signal amplitude and also improves the anti-interference ability against the combined effects of multiple particle features compared with the single channel. Through the validation based on the laser prototype with four-channel beam emitting, the above conclusions are supported by the experimental results. Therefore, this study not only reveals the laser target properties under the 3D particle collision perspective, but also reflects the reasonableness and effectiveness of utilizing the target characteristics in the 3D particle collision mode to enhance the detection performance of FMCW laser fuze in the smoke.
4 November 2011 in Journal of Physics D: Applied Physics
Memristive characteristics in semiconductor/metal contacts are studied by conductive atomic force microscopy. The ZnO/Au device shows excellent memristive characteristics under Pt and TiN tips and the resistances of the high-resistance state and the low-resistance state are almost unchanged with time. Unipolar resistive switching behaviour is observed when a positive voltage is applied. In addition, the pure Au film also shows resistive switching behaviour under the TiN tip which was used to test the ZnO/Au device, but this behaviour cannot be observed under a Pt tip. Our results suggest that the memristive characteristics existing in semiconductor/metal contacts are due to the formation of conducting filaments in the interior of the semiconductor and the change in the energy barrier at the interface between the conductive atomic force microscope tip and the ZnO film.
In ultra-wideband (UWB) radio fuze architectures, the receiver serves as the core component for receiving target-reflected signals, with its performance directly determining system detection accuracy. Manufacturing tolerances and operational environments induce inherent stochastic perturbations in circuit components, causing deviations of actual parameters from nominal values. This consequently degrades the signal-to-noise ratio (SNR) of receiver outputs and compromises ranging precision. To overcome these limitations and identify critical sensitive components in the receiver, this study proposes the following: (1) A dual-channel time-domain correlated UWB fuze detection model; and (2) the integration of an asymmetric tolerance mathematical model for dual-channel correlated receivers with a Morris-LHS-Sobol collaborative strategy to quantify independent effects and coupling interactions across multidimensional parameter spaces. Simulation results demonstrate that integrating capacitors and resistors constitute the dominant sensitivity sources, exhibiting significantly positive synergistic effects. Physical simulation correlation and hardware circuit verification confirms that the proposed model and sensitivity analysis method outperform conventional approaches in tolerance resolution and allocation optimization, thereby advancing the theoretical characterization of nonlinear coupling effects between parameters.
The precise ranging of ultra-wideband (UWB) fuzes relies on extracting time delay information from echo signals. However, ground multipath propagation effects induce a significant time-delay spread in the echo signals. This manifests as a channel impulse response (CIR) composed of numerous, closely spaced components, creating a challenging super-resolution problem that severely constrains the ranging accuracy and reliability of the fuze. Therefore, accurately estimating the CIR that characterizes these multipath structures from a single echo observation is crucial for the UWB fuze to perceive terrain structures and enhance ranging capabilities. This study proposes the following methods: (1) establishing an equivalent discrete multipath model(EDMM) of the ground to characterize the CIR; (2) proposing a sparse blind deconvolution(SBD) method via the ADMM-based framework under an asymmetric structured prior (ASP), which employs parametric projections to constrain the physical morphology of the unknown source signal, and designing a periodic sparse cluster projection operator to achieve super-resolution recovery of the discrete multipath structure of the channel h by enforcing the EDMM prior. Through three-variable robust decomposition, it actively separates dispersed clutter and enhances performance under low signal-to-noise ratio (SNR) conditions. Experimental results from both simulations and measured data demonstrate that the proposed algorithm exhibits excellent robustness and recovery accuracy in complex low-SNR scenarios, providing a foundational offline analysis method for understanding complex channel characteristics and guiding the development of improved real-time ranging algorithms.