Mn (II)/AC adsorbents were prepared by ultrasonic impregnation. The 2 wt. % Mn/AC showed best adsorptive performance, and the optimal adsorption temperature was 313 K. Benzene, methylbenzene, and naphthalene were used to explore the adsorptive selectivity of Mn/AC, indicating that Mn could enhance the adsorptive capacity but could not improve the adsorptive selectivity. The adsorptive mechanism was mostly like to be π-complex. Adsorptive isotherms and kinetics were investigated, and the parameters were calculated. The R2, RMSE, and AICc were used to assess the optimal model. The results showed that Temkin adsorptive isotherm was more suitable to describe the isothermal data; the MPnO kinetics model was more superior to other kinetic models. The order of reaction was between 1 and 2. The outcome of adsorptive thermodynamics indicated that removal of DBT onto Mn/AC was a spontaneous and exothermic process.
The adsorption and activation of both CO2 and methanol are mainly affected by the distance of the Lewis acid site, Zr4+, and Lewis base, Zr4+/O2−, of the Zr-based catalysts. In this paper, Zr-incorporated SBA-15 (Zr-SBA-15) and Zr-grafted SBA-15 (Zr/SBA-15) catalysts were prepared with different Zr environments, and were analyzed with N2 adsorption–desorption isotherms, X-ray diffraction, UV-vis spectra, and XPS. It was proposed that Zr-SBA-15 catalyst with Si-O-Zr-OH and Zr-O-Si-OH structure exhibited non-adjacent sites between Zr4+ and Zr4+/O2−, while Zr/SBA-15 catalyst with Zr-O-Zr-OH structure showed neighboring sites between Zr4+ and Zr4+/O2−. Furthermore, the Zr/SBA-15 catalyst exhibited good catalytic activity, while no DMC was detected over the Zr-SBA-15 catalyst at the same reaction conditions. For combined in situ infrared and catalytic performance, it was indicated that the methanol and CO2 could be activated to form DMC, only when the Zr4+ and Zr4+/O2− sites existed and were adjacent to each other in the Zr-O-Zr-OH of Zr/SBA-15 catalyst.
22 August 2016 in Journal of Chemical & Engineering Data
The environmental pollution caused by organic dyes has damaged serious harm to human life. Hence, a series of Zr-Mg composite oxide nanoclusters with different metal ratios were synthesized by solvothermal method for adsorption of malachite green in aqueous solution. The optimal adsorbent with Zr/Mg metal molar ratio of 1 : 2 presented good adsorption performance, which adsorption capacity reached 12647.60 mg/g, and removal rate of malachite green reached more than 99%. These adsorbents were characterized by X-ray diffraction, Fourier-transform infrared spectra, nitrogen adsorption-desorption, scanning electron microscope, transmission electron microscope, and other methods. Influence of initial concentration of malachite green solution, pH, adsorption temperature, and contact time on absorption efficiency was investigated through batch experiments. Pseudo-second-order kinetic model can well describe the adsorption kinetic data. The three-parameter Sips isotherm model was more suitable for predicting the experimental results than Langmuir and Freundlich, and the adsorption process was endothermic.
The wide application of organic dyes in many industries has brought challenges to the effective treatment of organic wastewater. In this study, a series of ZrMOX (M: Fe, Co, Ni, Cu) particles were prepared by the coprecipitation method to adsorb methyl orange (MO) in aqueous solution. The adsorbents were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and N2 adsorption-desorption. The selected adsorbent with the best adsorption performance was ZrFeOX with a molar ratio of 1 : 1 and calcination temperature of 573 K; the maximum adsorption capacity was 138.95 mg·g-1. The adsorption behavior of MO onto the adsorbent was studied as a function of contact time, initial concentrations, adsorption temperature, and pH conditions. The analysis results showed that pseudo-second-order, Elovich, and Langmuir models were suitable to describe the adsorption behavior of MO on the adsorbent. In addition, regeneration experiments presented that the MO removal rate reached over 96% after repeated recycling for 5 times. The adsorbent developed in this work is not only simple to prepare and low cost but also green and energy-saving, which can make some contributions to environmental governance.