The recycling of proton exchange membrane water electrolyzer (PEMWE) raw materials is imperative due to their scarcity, cost, complexity and environmental impact. This is particularly true in the context of expanding electrolyzer manufacturing and reducing production costs. Developing comprehensive recycling strategies requires the creation of a model stack due to the diversity in stack design, structure and materials. The review-derived model presented here provides a sound basis and summarizes the variety of approaches found in the literature and industry. The holistically developed recycling chain, including dismantling, mechanical processing, hydrometallurgical processes and carbon reuse, is characterized by the complete recycling of materials, the reduced application of energy-intensive process steps and the avoidance of environmentally harmful processes. Emphasis is placed on demonstrating the non-destructive disassembly of joined components, the dry mechanical decoating of catalyst-coated membranes, membrane dissolution, the separation of anode and cathode particles and the environmentally friendly hydrometallurgical processing of platinum.
The recycling of proton exchange membrane water electrolyzer (PEMWE) raw materials is imperative due to their scarcity, cost, complexity, and environmental impact. This is particularly true in the context of expanding electrolyzer manufacturing and reducing production costs. Developing comprehensive recycling strategies requires the creation of a model stack due to the diversity in stack design, structure, and material. The review derived model presented here provides a sound basis and summarizes the variety found in literature and industry. The holistically developed recycling chain, including dismantling, mechanical processing, hydrometallurgical processes and carbon reuse, is characterized by the complete recycling of materials, the reduced application of energy-intensive process steps and the avoidance of environmentally harmful processes. Emphasis is placed on demonstrating non-destructive disassembly of joined components, dry mechanical decoating of catalyst coated membranes, membrane dissolution, separation of anode and cathode particles, and environmentally friendly hydrometallurgical processing of platinum.
Current recycling methods for the very popular lithium‐ion batteries (LIBs) focus mainly on recovering valuable metals such as cobalt and nickel for economic reasons. The cell casing components, which are mainly made of aluminum, can make a significant contribution to achieving political recycling targets. Mechanical processes are used to separate the casing components from the overall LIB material stream. The aluminum, copper, steel, and plastic components are then further concentrated into various potential products by, e.g., magnetic separation, eddy current separation, and air classification. Considering the benefits of additional stress to compact the metal parts, the knowledge gained from the individual sorting steps can be combined to form a process flow chart.
The recovery of critical raw materials from water electrolysers, which are used to produce green hydrogen, is essential to keep the raw materials with limited availability in the material cycle and to facilitate the expansion of production of this technology, which is supposed to be essential for the decarbonisation of our industrial society. Proton exchange membrane water electrolysers (PEMWE) use precious metals such as Ir and Pt as catalysts, which require a high recycling rate due to their natural scarcity. In order to investigate at an early‐stage mechanical recycling technologies, such as shredding for liberation and milling for decoating of these complex materials, it becomes necessary to develop small‐scale experimental methods. This is due to the low availability of End‐of‐Life samples and the high price of pristine electrolyser components. Especially decoating has shown huge potential for a highly selective separation of defined material layers; nevertheless, until now, there is no method to determine the success of decoating of the flexible polymer membrane, which is coated on both sides with particle‐based electrodes. One possible concept is presented here, using scanning electron microscope images and micro‐X‐ray fluorescence elemental maps. Image processing and segmentation is performed using the WEKA software and a simple thresholding method. This allows the efficiency of the decoating process to be determined with an accuracy of ±0.5 percentage points for decoated PEMWE cell samples. The high accuracy of the presented method framework provides the necessary tool for any further quantitative development of improved mechanical stressing for decoating.