The recycling of proton exchange membrane water electrolyzer (PEMWE) raw materials is imperative due to their scarcity, cost, complexity and environmental impact. This is particularly true in the context of expanding electrolyzer manufacturing and reducing production costs. Developing comprehensive recycling strategies requires the creation of a model stack due to the diversity in stack design, structure and materials. The review-derived model presented here provides a sound basis and summarizes the variety of approaches found in the literature and industry. The holistically developed recycling chain, including dismantling, mechanical processing, hydrometallurgical processes and carbon reuse, is characterized by the complete recycling of materials, the reduced application of energy-intensive process steps and the avoidance of environmentally harmful processes. Emphasis is placed on demonstrating the non-destructive disassembly of joined components, the dry mechanical decoating of catalyst-coated membranes, membrane dissolution, the separation of anode and cathode particles and the environmentally friendly hydrometallurgical processing of platinum.
The recycling of proton exchange membrane water electrolyzer (PEMWE) raw materials is imperative due to their scarcity, cost, complexity, and environmental impact. This is particularly true in the context of expanding electrolyzer manufacturing and reducing production costs. Developing comprehensive recycling strategies requires the creation of a model stack due to the diversity in stack design, structure, and material. The review derived model presented here provides a sound basis and summarizes the variety found in literature and industry. The holistically developed recycling chain, including dismantling, mechanical processing, hydrometallurgical processes and carbon reuse, is characterized by the complete recycling of materials, the reduced application of energy-intensive process steps and the avoidance of environmentally harmful processes. Emphasis is placed on demonstrating non-destructive disassembly of joined components, dry mechanical decoating of catalyst coated membranes, membrane dissolution, separation of anode and cathode particles, and environmentally friendly hydrometallurgical processing of platinum.
The enormously increasing demand for rare earth elements (REE), due to their wide high tech-application areas and their limited and unproportioned reserves across the globe, induced the utilization of secondary resources to provide more robust REE supply chains. In several studies, hydrometallurgical/pyrometallurgical routes have been employed to recover REE’s from secondary resources such as industrial residues, end-of-life magnets, batteries, and catalysts. In this pioneer study, we investigate the feasibility to use end-of-life RE-silicate environmental barrier coatings (EBCs) of turbine engine components as a secondary Yb resource. For this purpose, state-of-the-art EBC materials, ytterbium monosilicate (Yb2SiO5), and ytterbium disilicate (Yb2Si2O7), were exposed to a fictional aeroengine scenario involving in service contamination by airborne mineral dusts, commonly referred to as CMAS corrosion. CMAS-corroded Yb-silicate pellets were exposed to sulfuric acid leaching. Phase and microstructural analyses were conducted on starting materials and leaching residues, in a comparative manner, to explain the leaching mechanism. Leaching solutions were analyzed by ICP-OES indicating a very promising preliminary leaching efficiency and selectivity for Yb2SiO5, whereas Yb2Si2O7 displayed a very low leachability. Further prospects were suggested to enhance process efficiency and implications on repair/overhaul end-of-life Yb-silicate EBCs are discussed.