Long tunnels often collapse during the construction period. To ensure personnel safety, the geological characteristics must be predicted before tunnel face excavation. In this study, the ground-penetrating radar (GPR) technique is introduced to obtain information regarding the tunnel excavation face at a certain interval. The amplitude of the radar echo signal is expressed as a function of the position and travel time. A B-scan strategy is selected for the GPR to obtain tunnel information. A frequency-domain (-k) focusing algorithm, namely, a synthetic aperture radar focusing algorithm, is applied to focus scattered radar signals to obtain focused images. A low-pass filter is designed to remove noises from the original signals. The contours of target objects are extracted from the background information using the edge detection technique. Space coordinate values of the objects are converted to polar coordinates using the Hough transform algorithm for 3D modeling. Visual C++ and AutoCAD are combined to develop a 3D CAD model to help managers in controlling the construction process. The system creates 3D visualization model images and evaluates the geological characteristics of the tunnel excavation faces. The Taigu Tunnel located in the Shanxi Province of China is taken as a case study. A procedure for the geological analysis of this tunnel is introduced in detail, and a 3D image model is built. The results show that the 3D model can help predict rock compositions and locate potential hazards. Moreover, it has better accuracy than conventional models and can be applied to similar transportation construction projects.
In order to promote traffic safety at freeway off-ramps, this paper designed a hybrid model to identify a lane-changing with vision technology. The unmanned aerial vehicle was used to collect video stream data at five off-ramps for Xi'an Raocheng freeway during weekdays. The positional information-of-an individual vehicle is recorded at a frequency of 5 Hz. Each trajectory is composed of 30 positional records and all trajectories are divided into lane-changing and lane-keeping units. Features such as lateral driving speed, lane departure, and the lane deviation angle extracted from trajectory records are related to the lane-changing behaviors. We develop a hybrid model of the Gaussian Mixture Model and the Continuous Hidden Markov Model to identify lane-changing behaviors at off-ramps with these features. Basing on test set, we conduct a test for the hybrid model and the result shows that the prediction accuracy of the proposed model is as high as 94.4% for lane-changing behavior and 93.6% for lane-keeping behavior.
13 October 2022 in International Journal of Sustainable Transportation
To confront the lack of robust and accessible models predicting diesel truck fuel consumption, this study develops an Engine-based Correction Model (ECM) using a sample containing vehicle operation and road data from heavy-duty diesel trucks (HDTs) along an urban arterial in Sichuan Province, China. This model is compared with two popular methods, the VT-Micro model and the CMEM model, in terms of goodness-of-fit and out-of-sample prediction performance. The results show that the proposed ECM models explain on average 89.7% of the variation in fuel consumption across the four modes and produce the smallest error, measured by MAPE and RMSE, for predicting each mode. Specifically, the MAPE values of the new ECM models are 7.95% to 25.59% lower than those of the VT-Micro models and 5.74% to 13.27% lower than the CMEM models. The improvement of RMSE values ranges from 0.1780 to 2.0940 cc/s and from 0.0171 to 0.7259 cc/s, compared to the VT-Micro model and CMEM model, respectively. In sum, the new ECM outperforms the other two existing models in both goodness-of-fit and predictive power across all modes. The enhanced performance of ECM can be attributed to the correction component and a model-building process powered by the simulated annealing (SA) algorithm that reliably and quickly weed out ineffective model forms. The results can inform driver training to foster energy-efficient driving behavior and assess the impact on fuel consumption of roadway design policies.
28 November 2020 in Mathematical Problems in Engineering
Different vehicular speed limits may have an impact on the balance between safety and efficiency of travel on mountainous road corners associated with complex road conditions. Placing suitable speed limit warning signs does not merely effectively improve traffic safety but can also improve traffic efficiency. In this study, a global positioning system (GPS) terminal and Metrocount were used to collect vehicle speed data from more than 40 provincial-level curves in 8 provinces over the course of 1 year. Each road data collection time-period lasted approximately 8 hours. A descriptive statistics method was adopted by means of data screening and pretreatment. Additionally, both a velocity difference estimation model was established and a linear model of velocity differential estimation was constructed. Quantitative analysis was carried out on the safe speed, the driver’s expected speed, and the location of the speed limit warning signs. This demonstrated a positive correlation with the initial speed. When the difference in speed was greater than 15 km/h, a safety warning sign was required to limit the design speed to 80 km/h. A safety warning sign was also required when the corner radius was less than 300 m. The location of safety warning signs could be calculated based on the operating speed and taking driving safety and the visual range of drivers into consideration. The results can provide a theoretical reference for setting up appropriate safe speed limiting signs on road corners in mountainous areas.
16 January 2019 in Advances in Mechanical Engineering
Truck-related crashes result in tremendous lives and property loss and become a serious safety issue in China. The goal of this article is to identify the influential factors for severity of truck-related crashes using data from Jingjintang freeways in China and to design an ordered probit model to explore their relationship. Records including crashes, traffic flow attributes, and geometric design features ranging from 2009 to 2012 were collected from Jingjintang freeway. Crashes are divided into three severity levels: slight injury, injury, and fatal injury. The injury crashes is ranking the first place occupying 64.37%. Truck-related crashes are likely to occur when truck percentage is around 20% and 80%. The speed of traffic flow decreases with the more appearance of trucks. The ordered probit model is developed to estimate the impacts of influential factors on injury severity of truck-related crashes. Marginal effects for each level of injury severity are calculated. The results reveal that truck-involving crashes are highly sensitive to factors such as time of day, truck percentage, average slope, operating speed, speed difference, and exposure variable. The average slope of road segment and speed gaps has the greatest impact on all severity levels of crashes.