Yongtao LIU

Dr. Yongtao LIU

School of Automobile, Chang’an University, Xi’an Shaanxi 710064, China
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2021 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
QSQinyu Sun
Qinyu Sun
YGYingshi Guo
Yingshi Guo
Yongtao LIUYongtao LIU
Yongtao LIU
CWChang Wang
Chang Wang
MGMenglu Gu
Menglu Gu
YSYanqi Su
Yanqi Su
Driving simulators have been widely used in driving behavior analysis and intelligent driving algorithm development. However, the validity of driving behavior data derived from driving simulators remains unclear. In this study, 30 Chinese drivers were recruited to participate in two experiments: on-road and simulator experiments. An instrumented vehicle and a high-fidelity simulator were used in the on-road and simulator experiments, respectively, to investigate the effects of high speed (60, 80, and 100 km/h) and a visual distraction task on the lateral driving performance, including lane deviation (LD), standard deviation of the lane position (SDLP) rate, standard deviation of the steering wheel angle (SDSWA) rate, and steering wheel reversal rates (SRRs) (at levels of 1.3° and 2.5°). It was found that the visual distraction task impaired the drivers' lane-keeping ability. Furthermore, the driving task had similar effects on the LD, SDLP rate, and SRRs (2.5°) in the on-road and simulator experiments. The effects of the driving speed on the LD, SDLP rate, and SDSWA rate were comparable in both driving environments. However, the results confirmed that even a high-fidelity driving simulator could not achieve perfect absolute validity. The results provided preliminary evidence that the high-fidelity driving simulator used in this study might be an effective tool for investigating the effects of visual distractions task on lateral driving behavior.


23 December 2020 in Journal of Advanced Transportation
Verified
Journal Article
Open access
PDF file
Yongtao LIUYongtao LIU
Yongtao LIU
JQJie Qiao
Jie Qiao
THTianyuan Han
Tianyuan Han
LLLonghui Li
Longhui Li
TXTIng XU
TIng XU
Long tunnels often collapse during the construction period. To ensure personnel safety, the geological characteristics must be predicted before tunnel face excavation. In this study, the ground-penetrating radar (GPR) technique is introduced to obtain information regarding the tunnel excavation face at a certain interval. The amplitude of the radar echo signal is expressed as a function of the position and travel time. A B-scan strategy is selected for the GPR to obtain tunnel information. A frequency-domain (-k) focusing algorithm, namely, a synthetic aperture radar focusing algorithm, is applied to focus scattered radar signals to obtain focused images. A low-pass filter is designed to remove noises from the original signals. The contours of target objects are extracted from the background information using the edge detection technique. Space coordinate values of the objects are converted to polar coordinates using the Hough transform algorithm for 3D modeling. Visual C++ and AutoCAD are combined to develop a 3D CAD model to help managers in controlling the construction process. The system creates 3D visualization model images and evaluates the geological characteristics of the tunnel excavation faces. The Taigu Tunnel located in the Shanxi Province of China is taken as a case study. A procedure for the geological analysis of this tunnel is introduced in detail, and a 3D image model is built. The results show that the 3D model can help predict rock compositions and locate potential hazards. Moreover, it has better accuracy than conventional models and can be applied to similar transportation construction projects.

28 September 2023 in Energies
Verified
Journal Article
Open access
PDF file
Yongtao LIUYongtao LIU
Yongtao LIU
CZChunmei ZHANG
Chunmei ZHANG
ZHZhuo Hao
Zhuo Hao
CXCai Xu
Cai Xu
CLChuan-pan LIU
Chuan-pan LIU
YCYisong Chen
Yisong Chen
This article utilizes the research method of the Life Cycle Assessment (LCA) to scrutinize Lithium Iron Phosphate (LFP) batteries and Ternary Lithium (NCM) batteries. It develops life cycle models representing the material, energy, and emission flows for power batteries, exploring the environmental impact and energy efficiency throughout the life cycles of these batteries. The life cycle assessment results of different power battery recycling process scenarios are compared and analyzed. This study focuses on retired LFP batteries to assess the environmental and energy efficiency during the cascade utilization stage, based on a 50% Single-Cell Conversion Rate (CCR). The findings of the research reveal that, in terms of resource depletion and environmental emission potential, LFP batteries exhibit lower impacts compared to NCM batteries. The use of hydrometallurgy in recovering LFP power batteries leads to minimal life cycle resource consumption and environmental emission potential. During the cascade utilization stage of LFP batteries, significant benefits are noted, including a 76% reduction in mineral resource depletion (ADP e) and an 83% reduction in fossil energy depletion (ADP f), alongside notable reductions in various environmental impact factors. Simultaneously, considering the sensitivity of life cycle assessment indicators and their benefit percentages to different CCRs, it is observed that ODP exhibits the highest sensitivity to CCR changes, while evaluation indicators such as HTP, AP, and GWP show relatively lower sensitivity. This study can provide an effective reference for the establishment of an energy saving and emission reduction evaluation system of power batteries.

29 July 2020 in IEEE Access
Verified
Journal Article
Open access
JQJie Qiao
Jie Qiao
Fengxiang XuFengxiang Xu
Fengxiang Xu
KWKunying Wu
Kunying Wu
SZSuo Zhang
Suo Zhang
Yongtao LIUYongtao LIU
Yongtao LIU
The electric truck frame as a vital load-bearing component has aroused growing attentions due to its enormous potential in lightweight. However, few systematic studies have been performed on the multi-objective topological design of the frame attributable to its complexity on loading and conflicting objectives. This paper aims to develop a multi-objective topology optimization strategy of the electric truck frame based on the hybrid decision making method combining orthogonal test design (OTD) and analytic hierarchy process (AHP). The hybrid strategy is performed to obtain a new set of weight ratio combination from objective data and subjective judgment. The topological results show that the overall performance of the optimal frame is better than any of the methods applied alone. By comparing, it is found that the strength and stiffness of the optimal frame is higher than that of the original frame from the perspective of static conditions, and the low-order natural frequency of the optimal frame is significantly improved. It demonstrates that the proposed approach could be as an effective tool for multi-objective topology optimization of the electric truck frame in seeking lightweight and comprehensive mechanical performance. The hybrid strategy might be expected to provide some guidance for more complicated engineering problems.

20 November 2020 in PLOS ONE
Verified
Journal Article
Open access
PDF file
Yongtao LIUYongtao LIU
Yongtao LIU
JQJie Qiao
Jie Qiao
HXHaibo Xu
Haibo Xu
JLJiahui Liu
Jiahui Liu
YCYisong Chen
Yisong Chen
Many researchers use life cycle assessment methodology to investigate the energy and environmental impacts of energy-saving and new energy vehicles. However, in the context of China, the life cycle energy-saving and emission-reduction effects of extended-range electric vehicles (EREVs), and the optimal applicable vehicle size and driving conditions for EREVs have been rarely studied. In this study, based on the life cycle assessment theory, the resource consumption, energy exhaustion, and environmental impact of EREVs were comprehensively analyzed. In addition, a differential evaluation model of ecological benefits was established for comparing EREVs with other vehicles with different power sources. Finally, scenario analysis was performed in terms of different vehicle sizes and driving conditions. The results have shown that EREV has great advantages in reducing mineral resource consumption and fossil energy consumption. The consumption of mineral resources of EREV is 14.68% lower than that of HEV, and the consumption of fossil energy is 34.72% lower than that of ICEV. In terms of environmental impact, EREV lies in the middle position. The scenario analysis has revealed that, for EREV in China, the optimal vehicle size is the passenger car and the optimal driving condition is the suburban condition. This work helps to understand the environmental performance of EREVs in China and may provide a decision-making reference for the government.