Understanding the structure of thin films is essential for successful applications of metal-organic frameworks (MOFs), such as low k-dielectrics in electronic devices. This study focuses on the thin film formation of the 3D nanoporous MOF Cu2(bdc)2(dabco). The thin films are prepared by a layer-by-layer technique with varying deposition cycles (1 to 50). Thin film morphologies and crystallographic properties were investigated using atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, and grazing-incidence X-ray diffraction (GIXD). AFM revealed an island growth (Volmer-Weber) with plate-like shaped islands. FTIR and GIXD revealed that Cu2(bdc)2(dabco) crystals form already during the first preparation cycle. The heights of the islands do not increase linearly with the number of deposition cycles, suggesting multiple growth stages. X-ray diffraction pole figures uncover a uniplanar texture of the Cu2(bdc)2(dabco) crystals, together with randomly oriented crystallites. The fraction of uniplanar oriented crystals increases with each deposition cycle, reaching a maximum of 75% at ten deposition cycles, simultaneously achieving complete substrate coverage. However, already at five cycles, an additional phase of randomly oriented copper-terephthalate (Cu2(bdc)) crystals appeared; this phase reaches a fraction of 22% at the largest film thickness (50 cycles). In summary, a detailed understanding of the thin film formation of an archetypal layer-pillar MOF is presented, elucidating how films grow in terms of their morphology and crystalline properties. Samples prepared by ten cycles show complete coverage of the substrate together with the highest degree of preferred crystal orientation. These results establish a deepened understanding of critical parameters for MOF thin film applications, such as complete substrate coverage and definition of the nanopores relative to the substrate surface.
1 February 2025 in Journal of Applied Crystallography
Grazing-incidence X-ray diffraction (GIXD) is the technique of choice for obtaining crystallographic information from thin films. An essential step in the evaluation of GIXD data is the extraction of peak intensities, as they are directly linked to the positions of individual atoms within the crystal unit cell. In order to obtain reliable intensities independent of the experimental setup, a variety of correction factors need to be applied to measured GIXD raw data. These include the polarization of the incident beam, solid-angle variations, absorption effects, the transmission coefficient and the Lorentz correction. The aim of this work is to provide a systematic compilation of these intensity corrections required for state-of-the-art GIXD setups with static area detectors. In a first step, analytical formulae are derived on the basis of theoretical considerations. The obtained intensity corrections are then applied to measured GIXD raw data from samples with different textures, including a single crystal and thin films containing either randomly distributed or oriented crystallites. By taking advantage of the symmetries inherent in the different types of textures, integrated peak intensities are determined, and these are compared with intensities calculated from single-crystal diffraction data from the literature. Accurate intensity corrections promise an improved quality of crystal structure solution from thin films and contribute to achieving accurate phase and texture quantifications from GIXD measurements.
Grazing-incidence X-ray diffraction (GIXD) is widely used for the structural characterization of thin films, particularly for analyzing phase composition and the orientation distribution of crystallites. While various tools exist for qualitative evaluation, a widely applicable systematic procedure to obtain quantitative information has not yet been developed. This work presents a first step in that direction, allowing accurate quantitative information to be obtained through the evaluation of radial line profiles from GIXD data. An algorithm is introduced for computing radial line profiles based on the crystal structure of known compounds. By fitting experimental data with calculated line profiles, accurate quantitative information about orientation distribution and phase composition is obtained, along with additional parameters such as mosaicity and total crystal volume. The approach is demonstrated using three distinct thin film systems, highlighting the broad applicability of the algorithm. This method provides a systematic and general approach to obtaining quantitative information from GIXD data.