Friction stir processing (FSP) of Al6061-SiC-Graphite hybrid composites is studied in detail via force analysis, spectroscopic, microstructural and indentation studies. Effect of various tool rotational speeds was assessed, and the axial force variation was monitored. The presence of graphite as a reinforcement influences the axial force fluctuations due to its flaky nature and high thermal conductivity. Variation in microstructure at different tool rotational speed is studied using scanning electron microscope. The tool rotational speed has a significant influence on the area of FSP zone, fragmentation and depth of penetration of particles, dispersion of agglomerates and grain refinement of the matrix material. Spectroscopic characterization of the processed samples was done using Raman analysis and X-Ray diffraction studies. A noticeable change in intensity and shift in the respective Raman peak positions were observed, indicating residual stresses and various disorders in the crystal structure of the reinforced particles. Influence of tool rotational speed and existence of SiC and Graphite particles on the mechanical properties were further evaluated using nano indentation testing. The hybrid composite shows the combination of best and uniform mechanical properties at an optimum set of processing parameters.
The present study aims to enhance the strength of friction stir lap welded aluminum alloys by using an interlayer of graphene nanoplatelets (GNPs) at the weld interface. With GNP interlayer, the weld strength and percentage elongation increased by 121 and 53%, respectively, as compared to the weld without GNP interlayer. The interlayer also changes the mode of fracture from brittle in the weld without GNP to ductile mode. Grain size in the weld with interlayer decreased by ~38% as equated to the weld without GNP. The height of the hook defect (HD) and cold lap defect (CLD) decreased by 26% and 41%, respectively, in the weld with GNP interlayer as compared to the weld without interlayer. In weld with interlayer, the bottom of the top plate on the retreating side acts as the potential site for fracture due to the presence of an interfacial defect, and undeformed GNP layer. The strengthening of the weld is attributed to various primary strengthening mechanisms like thermal mismatch, grain refinement, Orowan looping, and load transfer. Moreover, GNP interlayer also prevents the formation of the Al2O3 layer at the lap interface and thus contribute significantly in the weld strengthening.