This article presents a review of current research on the use of molybdenum disulfide (MoS2) and its composites as promising materials for energy storage systems and functional coatings. Various MoS2 morphologies, including nanoflowers, nanoplatelets, and nanorods, are considered, as well as their effects on electrochemical properties and specific capacity. Particular attention is paid to strategies for modifying MoS2 using carbon nanomaterials (graphene, carbon nanotubes, porous carbon) and conductive polymers, which improve electrical conductivity, structural stability, and durability of electrodes. The important role of chemical vapor deposition (CVD), which allows the formation of uniform coatings with high purity, controlled thickness, and improved performance characteristics, is noted. A comparative analysis of advances in the application of MoS2 in sodium-ion batteries, supercapacitors, and microwave absorbers is provided. It has been shown that the synergy of MoS2 with carbon and polymer components, as well as the use of advanced deposition technologies, including CVD, opens new prospects for the development of low-cost, stable, and highly efficient energy storage devices.
The development of thin, wear-resistant coatings is a relevant area in the field of surface engineering, especially given the increasing demand for resource efficiency and reliability of machine elements. In this study, we investigate the structural and phase composition, tribological characteristics, and physical and mechanical properties of zirconium carbonitride (ZrCN) coatings deposited by high-velocity oxygen-fuel spraying (HVOF) on U8G carbon steel substrates. Particular attention is paid to the influence of spraying parameters, in particular air pressure, on the formation of coatings and their performance properties. X-ray phase analysis methods revealed the formation of Zr2CN, ZrC, ZrN, ZrO2, and Fe3O4 phases, with the dominance of the cubic phase ZrN(C) with a lattice parameter of a = 4.6360 Å. Tribological tests have shown that at an air pressure of 0.38 MPa, the minimum friction coefficient is achieved, presumably due to the formation of an amorphous CNx phase with a self-lubricating effect. The wear mechanism is predominantly abrasive in nature; the width of wear tracks is 329–759 μm. The coatings demonstrate a significant increase in microhardness—up to 1512–1857 HV, which is 4–4.5 times higher than the substrate. The results of adhesion tests carried out in accordance with ASTM D4541-22 showed a maximum adhesion strength of 14.56 MPa. The results obtained confirm the high efficiency of thin ZrCN coatings obtained by the HVOF method as a promising solution for protecting metal surfaces subject to intense wear in tribological systems.