TUThe National University of Life and Environmental Sciences of Ukraine
The National University of Life and Environmental Sciences of Ukraine
POP. Olender
P. Olender
У роботі показано, що передпосівна електрофізична стимуляція насіння та дослідження технологічних режимів для оптимального впливу на посівний матеріал є актуальними. Метою роботи єпідвищення посівних якостей насіння соняшнику на базі застосування лазерного оптичного випромінювання. Розглянуто способи передпосівної стимуляції насіння олійних культур та основні механізму дії стимулюючих факторів на проростання насіння. Встановлено, що одним з найбільш ефективних способів передпосівної обробки насіння соняшнику є використання лазерного опромінення. Метою експериментальних досліджень було визначення параметрів режимів передпосівного лазерного опромінення насіння соняшнику, що призводять до максимальної стимулюючої дії на посівні якості при мінімальних витратах енергії і максимально можливій продуктивності. Для проведення досліджень використовувалось насіння олійних культур, яке займає найбільші площі на території України (сорт «Гібрид»). Насіння відповідало першій репродукції за посівними якостями. Для отримання насіння зі зниженими посівними якостями з метою пошуку для них оптимальних режимів передпосівного опромінення був застосований відомий метод штучного старіння. Визначення посівних якостей насіння проводилося для дослідних партій до опромінення, а також після опромінення з подальшою витримкою в 6-7 днів. У всіх випадках визначення посівних якостей проводилося за стандартною методикою, при цьому пророщування насіння для всіх культур проводилося при температурі 20-30 °С на світлі за способом «на папері». При цьому використовувалися паперові серветки, які були перевірені на відповідність показників капілярного підйому, кислотності і зольності. Проби у обох випадках відбиралися в 2 партії по 30 насіннин кожна. Проведено повний факторний експеримент з визначення параметрів режиму передпосівного лазерного опромінення насіння соняшнику, встановлено лабораторну схожості насіння. Представлені результати випробувань режимів передпосівного лазерного імпульсного опромінення насіння соняшнику. Розроблено біотехнічну систему їх обробки. Запропонований метод встановлення параметрів технологічних режимів передпосівного імпульсного лазерного опромінення насіння олійних культур в залежності від вихідних посівних якостей посівного матеріалу. Встановлено залежності схожості і сили проростання насіння соняшнику від параметрів технологічних режимів передпосівного лазерного опромінення. Розроблено біотехнічну систему лазерної обробки насіння соняшнику, що дозволяє підвищити посівні якості насіння та врожайність даної культури.Ключові слова: лазерне випромінювання, біотехнічна система, посівні якості насіння, повний факторний експеримент, соняшник, система керування, фактори варіювання, передпосівна обробка
13 December 2023 in Optoelectronic Information-Power Technologies
В статті розроблено вдосконалену імітаційну модель поширення фотонів у розсіювальній біотканині на основі методу Монте-Карло, що дозволяє комплексно враховувати всі основні оптичні процеси, що відбуваються при поширенні оптичного випромінювання через БТ. На основі розробленої статистичної моделі проведено імітаційне моделювання процесів поширення фотонів у шкірі та окремих її шарах, яке дозволило встановити характеристики розсіювання та пропускання для кожного з шарів шкіри з модельними параметрами з урахуванням кутів падіння випромінювання видимого та ближнього ІЧ діапазонів, товщини шарів шкіри. Також моделювання дозволило визначити відносну інтенсивність розсіяних фотонів залежно від локалізації.
6 October 2025 in Engineering, Technology & Applied Science Research
Optimizing growth conditions for tomato crops is essential due to their sensitivity to environmental factors. Pre-sowing seed treatments, particularly irradiation with specific wavelengths, can significantly influence germination and subsequent plant development. This study investigates how five laser wavelengths (red 630 nm, green 530 nm, blue 470 nm, ultraviolet 390 nm, infrared 780 nm) and four exposure durations (15, 30, 45, 60 minutes), along with a control sample, affected two tomato cultivars (Moneymaker and Bull's Heart). A total of 42 treatment combinations were tested using tabular experimental data (numeric input features: cultivar, wavelength, exposure time), with growth outcomes, such as plant height and fruit yield, recorded. A feedforward neural network with two hidden layers was trained to predict the final height of the plant from the seed treatment parameters. The model achieved a strong predictive accuracy (R2≈0.92 and MSE≈9.5 cm2) using an 80:20 train-test data split. This study demonstrates that deep learning can effectively model plant growth responses to physical seed priming and can be used to optimize treatment protocols for improved agricultural outcomes.
19 July 2024 in Optoelectronic Information-Power Technologies
In the article developed as a result of the analysis of the obtained 2D distributions of the anisotropy parameters of the epidermis samples, only linear birefringence was found, the value of which changes in the plane of the section according to the thickness and density of the tissue fibers. Correspondingly, along the same fiber directions, the orientation of the birefringence axis changes smoothly (in the area of the tissue without pathology). For the affected areas of the tissue, the birefringence value is more homogeneous in the cross-section, and in the areas with visible severe damage it is minimal. The change in the orientation of in areas with a small and clearly visible lesion is chaotic. Thus, melanoma destroys epidermal cells so much that they become practically isotropic. Healthy tissue samples have a natural orientational order.
19 July 2024 in Optoelectronic Information-Power Technologies
Considered problems of instability of iterative processes in the analysis of I/V measuring converters with negative differential resistance caused by self-heating of these converters. An express method of determining the limits in which correct electrothermal DC analysis is provided has been developed. A method of synthesis of electrothermal models of thermoresistive, diode and transistor structures of primary converters of thermal flow sensors is proposed. In contrast to well-known circuit modeling packages (PSpice or MicroCAP), the proposed method allows you to obtain I-V characteristics in one cycle of DC analysis, taking into account the self-heating of the above-mentioned converters. The developed differential thermometer is a universal device for measuring the temperature difference, in particular for the implementation of thermal flow sensors, means of biochemical analysis, thermal conductivity, etc., and is characterized by a temperature difference measurement resolution of no worse than 0.001°C.
In this study, we investigated the use of the pre-sowing electrophysical stimulation of seeds, particularly focusing on optimizing technological regimes for enhancing seed quality. The aim of this study was to improve sunflower seed germination utilizing laser optical radiation. The methods explored involved the pre-sowing stimulation of oilseeds and analyzing the key mechanisms affecting germination. Through our experimental research, we sought to identify the most effective laser irradiation parameters, ensuring the maximum seed quality improvement with minimal energy use. Using seeds of the first reproduction, we employed artificial aging to simulate a reduced seed quality and determined optimal irradiation regimes. Standard methods were followed to assess seed quality before and after irradiation, with 6–7 days of further exposure. Seed germination was carried out under controlled light and temperature conditions using the “on paper” method with paper napkins. A full factorial experiment was performed and key parameters for laser irradiation were determined, confirming that the pre-sowing laser pulse treatment significantly improved seed quality. In this research, we developed a biotechnical system for processing seeds and propose a method to adjust irradiation parameters based on the initial seed quality. The system effectively enhanced germination and crop yield, offering a reliable solution for improving sunflower seed productivity through laser treatment.