In zirconia‐based shape memory ceramics (SMCs), cracking during the martensitic transformation can be avoided in structures that reduce the relative presence of grain boundaries where high levels of transformation mismatch stress develop. This approach has been well established in single crystals, but only for sample sizes below about 5 microns. In this paper, we extend the strategy of eliminating grain boundaries to bulk specimen scales by fabricating mm‐scale single crystal SMCs via cold crucible induction melting. For 1.5 and 2.0 mol% Y 2 O 3 ‐ZrO 2 , we study the cyclic martensitic transformation of both single crystal and polycrystal structures. Whereas single crystals have very repeatable transformation behavior in terms of hysteresis and strain amplitude, polycrystals degrade dramatically as they accumulate cracking damage with repeated cycling. As the polycrystal evolves from a pellet to granular packing of loose single crystals/grains, the energy dissipation converges with that of the single‐crystal structure, and the energy spent on cracking throughout that process is captured by calorimetry analysis. These results verify that grain boundaries play a key role in damage evolution during martensitic transformation and that microstructural control can extend the size‐scale of viable single crystal or oligocrystal SMCs from the micro‐ to the millimeter scale.
This work evaluates the effectiveness of in situ and ex situ passivation methods for mitigating the pyrophoricity of uranium–6 wt.% niobium spherical powders produced via the hydride–dehydride process coupled with plasma spheroidization. Oxide layer thickness was characterized using STEM/EDX, and pyrophoricity was assessed by a UN-recommended test method, which involves directly dropping the powders in the air. In situ passivation, performed by introducing flowing oxygen during spheroidization, produced oxide layers ranging from tens to hundreds of nanometers but resulted in inconsistent pyrophoricity mitigation at lower oxygen flow rates. Ex situ passivation, achieved by slow oxygen exposure over several months, formed uniform oxide layers of approximately 20 nm and consistently mitigated pyrophoricity. Despite requiring higher bulk oxygen content, in situ passivation enables faster processing and control of oxygen, while ex situ passivation achieves superior oxide uniformity with lower oxygen incorporation. These findings highlight the trade-offs between passivation methods and provide a foundation for improving the safety and scalability of reactive metal powder production.
High temperature crystallographic evolution of graphite determines the fundamental behavior and limitations of this critical material in extreme environments. In this study, the conical nozzle levitator was used in combination with high energy X-ray diffraction to study the crystallographic and atomic structure of graphite up to 2500 °C. The rhombohedral (3R) allotrope of carbon is related to the hexagonal (2H) allotrope of carbon through stacking faults. The annealing of these stacking faults was tracked as the 3R allotrope transformed into the 2H allotrope at elevated temperatures. Highly anisotropic lattice expansion and resulting coefficients of thermal expansion were catalogued and compared to literature values. Atomic displacement parameters were extracted using the Rietveld refinement method, revealing strong covalent bonding in the basal plane of the carbon layered structure that persisted at elevated temperatures and increasingly weak Van der Waals bonding perpendicular to the basal plane between the layers as a function of temperature. The results therein can be used to aid in modeling of directional deformation and shear behavior of graphite at elevated temperatures.