The use of natural materials as adsorbents and the environmentally friendly removal of pollutants and azo dyes from water are important topics today. The goal of this research work was to assess the utility of Luffa cylindrica (L. cylindrica) as a natural and non-conventional adsorbent for azo dyes in water on a large scale (2 L). An azo dye (AD) at a concentration of 0.250 g/L was removed from the solution at a rate of 63.07% using 10.0 g/L doses of L. cylindrica, and the maximum adsorption capacity of L. cylindrica was 25.25 mg/g. L. cylindrica desorbed 95.8% of the AD in 0.1 M NaOH. Thermodynamically, the adsorption occurs through pseudo-second-order kinetics and the behaviors adjust better to the Langmuir isotherm. The analysis of variance (p-value < 0.05) shows that the contact time and the concentration of AD significantly influence the adsorption capacity and removal of AD. Few studies have examined the environmentally friendly removal of azo dyes from water using a natural non-conventional adsorbent.

Reducing high concentrations of pollutants such as heavy metals, pesticides, drugs, and dyes from water is an emerging necessity. We evaluated the use of Luffa cylindrica (Lc) as a natural non-conventional adsorbent to remove azo dye mixture (ADM) from water. The capacity of Lc at three different doses (2.5, 5.0, and 10.0 g/L) was evaluated using three concentrations of azo dyes (0.125, 0.250, and 0.500 g/L). The removal percent (R%), maximum adsorption capacity (Q_m), isotherm and kinetics adsorption models, and pH influence were evaluated, and Fourier-transform infrared spectroscopy and scanning electron microscopy were performed. The maximum R% was 70.8% for 10.0 g L⁻¹ Lc and 0.125 g L⁻¹ ADM. The Q_m of Lc was 161.29 mg g⁻¹. Adsorption by Lc obeys a Langmuir isotherm and occurs through the pseudo-second-order kinetic model. Statistical analysis showed that the adsorbent dose, the azo dye concentration, and contact time significantly influenced R% and the adsorption capacity. These findings indicate that Lc could be used as a natural non-conventional adsorbent to reduce ADM in water, and it has a potential application in the pretreatment of wastewaters.

The concentration effect of Tradescantia spathacea (T. spathacea) as corrosion inhibitor of API 5L X52 steel in 0.5 M of H₂SO₄ was studied here through electrochemical and gravimetric techniques. To achieve it, samples of the material were prepared to be submitted to each of the tests. Results from electrochemical impedance spectroscopy (EIS) showed that there was an optimum concentration of the inhibitor in which is reached the maximum inhibition efficiency, displaying the best inhibition characteristics for this system with a maximum inhibition of 89% by using 400 ppm. However, the efficiency decreased until 40% when the temperature was increased to 60°C. Potentiodynamic polarization curves (PDP) revealed that some of the present compounds of T. spathacea may affect anodic and cathodic process, so it can be classified as a mix-type corrosion inhibitor for API 5L X52 in sulfuric acid. Also, this compound followed an adsorption mechanism; this can be described through a Frumkin isotherm with an adsorption standard free energy difference (ΔG°) of −56.59 kJmol⁻¹. Metal surface was studied through scanning electron microscope, results revealed that by adding inhibitor, the metal surface is protected; also, they evidenced low damages compared with the surface with no inhibitor. Finally, Tradescantia spathacea inhibited the corrosion process with 82% efficiency.

Medicago sativa (M. sativa)extract is a safe and eco-friendly corrosion inhibitor of 1018 steel in acid media. The inhibitor reached a maximum efficiency of 85% by using 500 ppm. In this work, we study the use of KI as an add-on to increase the inhibition efficiency ofM. sativa, as well as making the natural inhibitor competitive with the commercial ones. We evaluated the effect of halide ions through the variation of different concentrations of KI and its synergy with the extract ofM. sativaas a corrosion inhibitor of carbon steel in 0.5 M sulfuric acid and at different temperatures. The results were obtained through electrochemical techniques such as electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP) curves, and weight loss gravimetric technique. It was found that halide ions increase the inhibition efficiency ofM. sativafrom 85 to 95% when 5 mM concentration of KI was used. The efficiency of the inhibition increases proportionally with the immersion time but reduces when the temperature increases. The addition of iodide ions (I−) revealed that it exerts a synergistic effect on the inhibition of corrosion with the extract ofM. sativa. However, when studying the metal surface using a scanning electron microscope, pitting corrosion was found.

Ingeniería Investigación y Tecnología es una publicación trimestral, arbitrada, de investigación científica y tecnológica editada e impresa por la Facultad de Ingeniería de la UNAM. Su propósito es difundir información y conocimientos originales e inéditos relacionados con la ingeniería. Es un espacio para profesores, investigadores, profesionales y estudiantes de todo el mundo.

This research leads with the analysis of a structural joint. Different arrays of steel sheets were joined using bolts. The structures were built in a metallic box filled with Granitic 0/3 sand. This box was used as a rigid body to transmit impacts and the sand as a medium to interact between the body and the structure. Then, an optical set-up was placed to measure the interaction of the impact along the different arrays. Measurements were made 5 cm before and 5 cm after the bolt. Results were analyzed by performing signal filtering and approaching a mathematical solution revealing that impact interaction can be harmonic or damped oscillations with more than $98\%$ accuracy.