Unexploded ordnance (UXO), which causes many civilian casualties every year, has become a serious environmental problem. To deal with the problem, we have developed a new drone-based transient electromagnetic (TEM) system, which was designed for the UXO detection through very low altitude measurements. Drone-based TEM system uses the rotorcraft equipped with central loop TEM device to realize the UXO detection. The system was more safe and efficient than a ground-based TEM system in UXO detection. Compared with the airborne magnetic method or helicopter-borne TEM system, it has the advantages of low cost, flight safety, and so on. In this letter, the system characteristics are introduced in detail, providing the theoretical analysis of the system in UXO detection and verification of model data. Finally, through the UXO detection in the former weapon test base, the results show that the system is effective and successful in UXO detection.
18 March 2015 in Journal of Geophysics and Engineering
The coal goaf areas are the main cause of accidents involving water intrusion in coal mines. The ground collapse caused by water intrusion in goaf areas poses major threats to further coal mining as the conventional ground-based transient electromagnetic method is difficult to perform due to the hilly terrain in the Loess Plateau. In this study, a ground-airborne transient electromagnetic method for detecting coal goaf areas on the Loess Plateau was presented. First, a numerical model was built using the geological data of the study area. The transient electromagnetic method (TEM) responses of the coal goaf area were determined by forward modeling. Then, the high-precision wavefield transformation method was applied to image the forward model. It was found that compared with the apparent resistivity definition method, the results of the high-precision wavefield transformation method more accurately represented the subsurface structures and the volume effect was avoided. Finally, the high-precision time sweep wavefield imaging method was applied to process the field data. The results revealed that the high-precision wavefield imaging method was able to accurately determine the locations of the goaf areas. In addition, the upper and lower interfaces of the strata and the goaf areas were clearly identified.
Traditional transient electromagnetic methods use single sources for excitation and extract the characteristics of underground media by improving interpretation technology. This study focused the improvements of transient electromagnetic interpretation using complex source technology. A time-domain vector finite element method (TFEM) was applied on three-dimensional forward modelling of semi-airborne transient electromagnetic (TEM) with multiple electrical sources, and it analysed the characteristics of fields with multiple sources. The study used a model of an isolated anomalous body in a homogeneous medium as an example. The effects of different combinations of excitation sources on the distributions of the magnetic field characteristics were analysed. Numerical results showed that the magnetic field components in a specific area could be strengthened by changing the layout of the sources, which was significant for future field data collections. By comparing the transient electromagnetic fields of the vertical array dipole sources with that of the loop source, the anomaly transient electromagnetic field of multi-source was more obvious than the field with a single source. Taking a complex orebody model as an example, a cross-electric source was used to calculate the magnetic field components of the semi-airborne TEM method. The resistivity distribution characteristics of the underground medium were obtained using an apparent resistivity interpretation method of the vertical magnetic field, which fully demonstrated that a multi-source transient electromagnetic system had the ability to determine abundant resistivity information of a complex medium.
Geologic risk assessment and prediction are vital processes preceding the design and construction of tunnels, offering crucial insights for ensuring the safe and efficient execution of tunnel projects. The geologic challenges posed by water inrush and mud bursts in tunnel engineering are often associated with low-resistance karst fracture zones and karst fissures controlled by structural and stratigraphic trends, providing a robust geophysical foundation for the application of electromagnetic methods. In recent years, the rise of numerous deep, lengthy, and challenging tunnel projects in mountainous regions with intricate terrains has significantly heightened the complexity of tunnel exploration. Traditional geophysical detection methods and geologic survey techniques are constrained by site limitations and complex terrains, falling short in effectively detecting geologic disasters within operational tunnels. The flexibility and convenience of the ground-airborne transient electromagnetic method (GATEM) make it particularly suitable for operations in complex terrain areas. Taking the application of GATEM in the Daji Tunnel in Guangxi, China as an example, a background investigation of the topography and lithology of the tunnel area was conducted. A series of data preprocessing, full-field apparent resistivity definition, terrain correction, depth definition, and terrain offset processes were applied to the GATEM field data to obtain the electrical distribution in the tunnel area. By analyzing the electrical variations on the elevation surface above and below the tunnel, we inferred the potential water inflow paths, and the karst positions above the tunnel were mapped. Also, suggestions are made for the complex situations that may occur during the tunnel construction process. Ultimately, the findings are highly congruent with the actual excavation outcomes of the construction unit, which ensured the safe and efficient construction of the tunnel. Thus, the reliability and superiority of the GATEM in the geologic risk investigation of complex terrain tunnel engineering are validated.