Recently, metal phosphides have been investigated as potential anode materials because of higher specific capacity compared with those of carbonaceous materials. However, the rapid capacity fade upon cycling leads to poor durability and short cycle life, which cannot meet the need of lithium-ion batteries with high energy density. Herein, we report a layer-structured GeP3/C nanocomposite anode material with high performance prepared by a facial and large-scale ball milling method via in-situ mechanical reaction. The P-O-C bonds are formed in the composite, leading to close contact between GeP3 and carbon. As a result, the GeP3/C anode displays excellent lithium storage performance with a high reversible capacity up to 1109 mA h g−1 after 130 cycles at a current density of 0.1 A g−1. Even at high current densities of 2 and 5 A g−1, the reversible capacities are still as high as 590 and 425 mA h g−1, respectively. This suggests that the GeP3/C composite is promising to achieve high-energy lithium-ion batteries and the mechanical milling is an efficient method to fabricate such composite electrode materials especially for large-scale application.
Iron oxides have attracted considerable interest as abundant materials for high-capacity Li-ion battery anodes. However, their fast capacity fading owing to poorly controlled reversibility of the conversion reactions greatly hinders their application. Here, a sandwich-structured nanocomposite of N-doped graphene and nearly monodisperse Fe3O4 nanoparticles were developed as high-performance Li-ion battery anode. N-doped graphene serves as a conducting framework for the self-assembled structure and controls Fe3O4 nucleation through the interaction of N dopants, surfactant molecules, and iron precursors. Fe3O4 nanoparticles were well dispersed with a uniform diameter of ~15 nm. The unique sandwich structure enables good electron conductivity and Li-ion accessibility and accommodates a large volume change. Hence, it delivers good cycling reversibility and rate performance with a capacity of ~1,227 mA·h·g–1 and 96.8% capacity retention over 1,000 cycles at a current density of 3 A·g–1. Our work provides an ideal structure design for conversion anodes or other electrode materials requiring a large volume change.
The structural, magnetic, and electronic properties of Fe82Si4B10P4 metallic glass were systemically investigated by theoretical simulations. Strong atomic interaction between Fe and metalloid atoms can be observed, while the direct metalloid-metalloid atomic bonds are rare due to the solute-solute avoidance effect. The calculated value of saturation magnetic flux density (BS) is ~1.65 T, approaching to experimental result, which is contributed by not only the electron exchange between Fe and metalloid atoms, but also the p-d orbital hybridization of Fe atoms. Moreover, Fe atoms with neighboring P atom behaving larger magnetic moments reveals the important role of P element for promoting the BS value. The potential correlation between magnetic behaviors and the local atomic packing in this study sheds some light on the structural origin of the soft magnetic properties and, thereby the theoretical guidance for the development of new soft-magnetic metallic glasses.
16 May 2014 in Journal of Materials Science: Materials in Electronics
Stamen-like LiMnPO4 nanostructures self-assembled with nanorods along the [001] direction were successfully synthesized via a simple hydrothermal method. The crystalline structure, morphology and microstructure were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM). A possible mechanism for the formation of LiMnPO4 nanorods and the assembly of the stamen-like nanostructures was proposed based on the experimental results. Additionally, the electrochemical performance of the stamen-like LiMnPO4 nanostructures as cathode materials in Li-ion batteries was also investigated through charge–discharge measurements and CV curves.
Herein, we demonstrate the successful synthesis of novel Fe80Si9B(11−x)Px (x = 0, 1, 3, 5, 7) ultra-thick amorphous ribbons by planar flow casting. The influence of P alloying on glass forming ability (GFA), microstructure, thermal stability, soft magnetic properties, and ductility has been systematically investigated. The results reveal that introduction of P into Fe80Si9B11 alloy can remarkably enhance the GFA and increase critical thickness (tc) of the alloy from 45 to 89 um. Furthermore, the annealed FeSiBP amorphous alloys exhibited excellent soft magnetic properties, including high saturation magnetic flux density of 1.54 T, the low coercivity of 1.5 A/m, and low core losses of 0.15 W/kg. In addition, the representative Fe80Si9B8P3 ultra-thick amorphous alloy demonstrate excellent ductility even after annealing at 400 °C for 10 min, which indicates the superior performance of P-doped FeSiB alloys as compared to the commercial Fe78Si9B13 (Metglas 2605 S2) alloy. The combination of high GFA, excellent ductility, and low core losses of newly developed FeSiBP amorphous soft magnetic alloys makes them attractive candidates for magnetic applications in the high-frequency and high-speed electric devices.