N/A Mora Murillo

Dr. N/A Mora Murillo


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 June 2025 in Sensors
Verified
Journal Article
Open access
PDF file
Diego GuffantiDiego Guffanti
Diego Guffanti
NMN/A Mora Murillo
N/A Mora Murillo
MHMarco Hinojosa
Marco Hinojosa
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
JGJavier Oswaldo Obregón Gutiérrez
Javier Oswaldo Obregón Gutiérrez
LSLuis Miguel Sanchez
Luis Miguel Sanchez
Precise modeling of differential drive robots is crucial for effective control and trajectory planning in autonomous systems. A comparative analysis of two modeling approaches for a four-wheel differential drive robot is presented in this paper. The first approach, named Motor-Based Model (MBM), identifies four transfer functions, one for each motor, while the second approach, named Simplified Model (SM), uses only two transfer functions, one for linear velocity and another for angular velocity. Both models were validated by comparing their predicted trajectories against real odometry data obtained from a SLAM system implemented on a differential-drive robot. This provided a practical assessment of each model’s accuracy and underscored the importance of model selection in control design and navigation tasks. The results showed that the Motor-Based Model (MBM) consistently outperformed the Simplified Model (SM) in terms of odometry accuracy, both in position and orientation. Across all trajectories, the average RMSE for position using MBM was 0.309 m, while the SM recorded a higher average RMSE of 0.414 m. Similarly, the maximum position error averaged 0.522 m for MBM and 0.710 m for SM, confirming that MBM is more accurate and consistent in position tracking. Regarding the results of orientation estimation, when averaged across all experiments, the MBM maintained a lower angular RMSE of 0.170 rad in contrast to SM, which achieves an RMSE of 0.239 rad. The maximum angular error was also higher for the MBM at 0.316 rad, compared to 0.447 rad for the SM. Moreover, the computational performance evaluation indicated that the SM consistently outperformed MBM, achieving a 30% reduction in simulation time and substantially lower memory usage. These results demonstrate the relationship between model complexity and accuracy and suggest that the motor-specific model is more appropriate for applications requiring precise mapping or localization, such as SLAM, while the simplified model may be suitable for simpler use cases with lower computational requirements, such as embedded systems with limited resources. This paper provides a practical evaluation of the accuracy and computational performance of two modeling approaches, highlighting the implications of model selection for the design of navigation tasks.

13 January 2026 in Sensors
Verified
Journal Article
Open access
PDF file
Diego GuffantiDiego Guffanti
Diego Guffanti
NMN/A Mora Murillo
N/A Mora Murillo
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
JGJavier Oswaldo Obregón Gutiérrez
Javier Oswaldo Obregón Gutiérrez
MHMarco Hinojosa
Marco Hinojosa
David Alvarez SanchezDavid Alvarez Sanchez
David Alvarez Sanchez
Accurate trajectory tracking remains a central challenge in differential-drive mobile robots (DDMRs), particularly when operating under real-world conditions. Model Predictive Control (MPC) provides a powerful framework for this task, but its performance degrades when the robot deviates significantly from the nominal path. To address this limitation, robust recovery mechanisms are required to ensure stable and precise tracking. This work presents an experimental validation of an MPC controller applied to a four-wheel DDMR, whose odometry is corrected by a SLAM algorithm running in ROS 2. The MPC is formulated as a quadratic program with state and input constraints on linear (v) and angular (ω) velocities, using a prediction horizon of Np=15 future states, adjusted to the computational resources of the onboard computer. A novel dynamic look-ahead re-entry strategy is proposed, which activates when the robot exits a predefined lateral error band (δ=0.05 m) and interpolates a smooth reconnection trajectory based on a forward look-ahead point, ensuring gradual convergence and avoiding abrupt re-entry actions. Accuracy was evaluated through lateral and heading errors measured via geometric projection onto the nominal path, ensuring fair comparison. From these errors, RMSE, MAE, P95, and in-band percentage were computed as quantitative metrics. The framework was tested on real hardware at 50 Hz through 5 nominal experiments and 3 perturbed experiments. Perturbations consisted of externally imposed velocity commands at specific points along the path, while configuration parameters were systematically varied across trials, including the weight R, smoothing distance Lsmooth, and activation of the re-entry strategy. In nominal conditions, the best configuration (ID 2) achieved a lateral RMSE of 0.05 m, a heading RMSE of 0.06 rad, and maintained 68.8% of the trajectory within the validation band. Under perturbations, the proposed strategy substantially improved robustness. For instance, in experiment ID 6 the robot sustained a lateral RMSE of 0.12 m and preserved 51.4% in-band, outperforming MPC without re-entry, which suffered from larger deviations and slower recoveries. The results confirm that integrating MPC with the proposed re-entry strategy enhances both accuracy and robustness in DDMR trajectory tracking. By combining predictive control with a spatially grounded recovery mechanism, the approach ensures consistent performance in challenging scenarios, underscoring its relevance for reliable mobile robot navigation in uncertain environments.

26 May 2023
Verified
Book Chapter
Closed access
EPErick Michael Andrade Paredes
Erick Michael Andrade Paredes
NMN/A Mora Murillo
N/A Mora Murillo
VRVerónica Beatriz Sánchez Ramírez
Verónica Beatriz Sánchez Ramírez
DPDIGVIJAY PANDEY
DIGVIJAY PANDEY
The study focused on analysing the quality of lighting in the workplaces of Mantransve, which is preparing to implement a project to test domestic energy efficiency. A descriptive study was used to collect information, and a subtractive method was used to develop the subject and variables. In addition, the first analysis of the company is done with a SWOT matrix in the specific areas of the company. Subsequently, 54 employees between technical and managerial positions were interviewed. Technical data of lamps in lumens taken before and after give the possibility of improvement of lighting energy efficiency after comparison with DIALUX. In the results, the hypothesis comparison shows that there is a significant improvement and energy savings in the medium term in the lighting of the rooms analysed according to the UNE 12464.1 standard for indoor lighting. Finally, it is recommended to completely change the lighting to commercial lighting levels.

1 January 2025 in Revista Ingenio global
Verified
Journal Article
Open access
PDF file
FVFabricio Rolando Marcillo Vera
Fabricio Rolando Marcillo Vera
LCLorena Cusme
Lorena Cusme
JMJorge Molina
Jorge Molina
RMRafael Mora
Rafael Mora
NMN/A Mora Murillo
N/A Mora Murillo
WPWillian Paladinez
Willian Paladinez
La investigación exploró la aplicación de la metodología Lego Serious Play (LSP) en la educación en robótica, específicamente en la unidad de aprendizaje de diseño asistido por computadora. El propósito del estudio fue evaluar cómo LSP podía mejorar la experiencia de aprendizaje, fomentando la creatividad, la colaboración y el pensamiento crítico. A través de actividades prácticas utilizando piezas de LEGO, los estudiantes construyeron modelos de maquinaria pesada y evaluaron su aceptación mediante cuestionarios. Los resultados indicaron que LSP contribuyó a una mejor comprensión de conceptos técnicos y aumentó la motivación. Esta metodología ofreció una alternativa efectiva y lúdica para la enseñanza de la robótica.

10 January 2024 in Revista Científica Multidisciplinar G-NER@NDO
Verified
Journal Article
Open access
PDF file
JPJonathan Alexis Bombon Paredes
Jonathan Alexis Bombon Paredes
NVNelson Rodrigo Zapata Villacis
Nelson Rodrigo Zapata Villacis
NMN/A Mora Murillo
N/A Mora Murillo
MGMayra Verónica Toapanta Galarza
Mayra Verónica Toapanta Galarza
El presente análisis evaluó la eficiencia eléctrica en un motor monofásico con bobinado de cobre y otro con bobinado de aluminio, al ser conductores de diferente resistencia y resistividad eléctrica es importante destacar las características que influyen como elemento interno de un motor eléctrico, en consecuencia, se analiza las diferentes variables visibles en cada prueba. Mediante experimentación se medirán variables como corriente, voltaje, temperatura y resistencia del bobinado al ser datos de vital importancia en el funcionamiento adecuado del motor. En la industria se encuentran actualmente motores con bobinados de aluminio, por su poca fiabilidad se necesita obtener datos claros que demuestren la eficiencia del mismo. Se utilizaron instrumentos de medición eléctrica como el multímetro, pistola de temperatura, además de tomar en cuenta la creación del campo electromagnético, utilizando un aparato de medición como el teslámetro, y otros componentes eléctricos necesarios para el arranque y manejo seguro del motor. Con el fin de determinar de forma cuantitativa los valores que demuestran las diferentes variables que se obtienen de cada motor, comprobamos que las diferencias entre el bobinado de cobre y aluminio influyen en gran medida la temperatura por el tipo de enfriamiento y construcción de la máquina. Como conclusión general podemos decir que el motor con bobinado de cobre es el más eficiente al ser un elemento con mejor conductividad eléctrica por lo que se recomienda utilizar motores con bobinado de cobre, y de aluminio en casos donde no se realicen grandes esfuerzos.

10 July 2024 in Revista Científica Multidisciplinar G-NER@NDO
Verified
Journal Article
Open access
PDF file
JCJair Joel Tupe Canales
Jair Joel Tupe Canales
NMN/A Mora Murillo
N/A Mora Murillo
JRJimena Carolina Taco Rivera
Jimena Carolina Taco Rivera
El presente trabajo analiza la incidencia de GeoGebra en el rendimiento académico de estudiantes de primer nivel en Tecnología Superior en Electricidad del Instituto Superior Tecnológico Tsa´chila (ITS Tsa’chila). Los métodos tradicionales de enseñanza de matemáticas suelen ser complejos y poco motivadores. Este estudio evalúa cómo GeoGebra puede mejorar la comprensión y participación de los estudiantes en clases de matemáticas o relacionadas. Se socializó con estudiantes y docentes, y se realizaron dos mediciones: una aplicando una clase de funciones sin utilizar GeoGebra y otra utilizando GeoGebra, seguida de una encuesta de satisfacción aplicada a los estudiantes. La metodología utilizada fue cuantitativa no experimental, y los resultados se analizaron en Excel y SPSS. Los hallazgos revelan que más del 80.9% de los estudiantes considera a GeoGebra como una herramienta excelente para aprender matemáticas de manera dinámica, y el 70.5% opina que puede reemplazar las clases tradicionales. Además, el 92.6% de los estudiantes expresó satisfacción con su uso. Estos resultados indican un impacto positivo de GeoGebra en la percepción y rendimiento académico de los estudiantes. En conclusión, GeoGebra se presenta como una herramienta valiosa para mejorar la comprensión y retención de conceptos matemáticos. La investigación sugiere que su integración en el currículo de matemáticas puede contribuir significativamente a mejorar el rendimiento académico y la motivación de los estudiantes en el ITS Tsa’chila, promoviendo un aprendizaje más activo y participativo.