Santiago Bustamante Sanchez

Dr. Santiago Bustamante Sanchez


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 June 2025 in Sensors
Verified
Journal Article
Open access
PDF file
Diego GuffantiDiego Guffanti
Diego Guffanti
NMN/A Mora Murillo
N/A Mora Murillo
MHMarco Hinojosa
Marco Hinojosa
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
JGJavier Oswaldo Obregón Gutiérrez
Javier Oswaldo Obregón Gutiérrez
LSLuis Miguel Sanchez
Luis Miguel Sanchez
Precise modeling of differential drive robots is crucial for effective control and trajectory planning in autonomous systems. A comparative analysis of two modeling approaches for a four-wheel differential drive robot is presented in this paper. The first approach, named Motor-Based Model (MBM), identifies four transfer functions, one for each motor, while the second approach, named Simplified Model (SM), uses only two transfer functions, one for linear velocity and another for angular velocity. Both models were validated by comparing their predicted trajectories against real odometry data obtained from a SLAM system implemented on a differential-drive robot. This provided a practical assessment of each model’s accuracy and underscored the importance of model selection in control design and navigation tasks. The results showed that the Motor-Based Model (MBM) consistently outperformed the Simplified Model (SM) in terms of odometry accuracy, both in position and orientation. Across all trajectories, the average RMSE for position using MBM was 0.309 m, while the SM recorded a higher average RMSE of 0.414 m. Similarly, the maximum position error averaged 0.522 m for MBM and 0.710 m for SM, confirming that MBM is more accurate and consistent in position tracking. Regarding the results of orientation estimation, when averaged across all experiments, the MBM maintained a lower angular RMSE of 0.170 rad in contrast to SM, which achieves an RMSE of 0.239 rad. The maximum angular error was also higher for the MBM at 0.316 rad, compared to 0.447 rad for the SM. Moreover, the computational performance evaluation indicated that the SM consistently outperformed MBM, achieving a 30% reduction in simulation time and substantially lower memory usage. These results demonstrate the relationship between model complexity and accuracy and suggest that the motor-specific model is more appropriate for applications requiring precise mapping or localization, such as SLAM, while the simplified model may be suitable for simpler use cases with lower computational requirements, such as embedded systems with limited resources. This paper provides a practical evaluation of the accuracy and computational performance of two modeling approaches, highlighting the implications of model selection for the design of navigation tasks.

13 January 2026 in Sensors
Verified
Journal Article
Open access
PDF file
Diego GuffantiDiego Guffanti
Diego Guffanti
NMN/A Mora Murillo
N/A Mora Murillo
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
JGJavier Oswaldo Obregón Gutiérrez
Javier Oswaldo Obregón Gutiérrez
MHMarco Hinojosa
Marco Hinojosa
David Alvarez SanchezDavid Alvarez Sanchez
David Alvarez Sanchez
Accurate trajectory tracking remains a central challenge in differential-drive mobile robots (DDMRs), particularly when operating under real-world conditions. Model Predictive Control (MPC) provides a powerful framework for this task, but its performance degrades when the robot deviates significantly from the nominal path. To address this limitation, robust recovery mechanisms are required to ensure stable and precise tracking. This work presents an experimental validation of an MPC controller applied to a four-wheel DDMR, whose odometry is corrected by a SLAM algorithm running in ROS 2. The MPC is formulated as a quadratic program with state and input constraints on linear (v) and angular (ω) velocities, using a prediction horizon of Np=15 future states, adjusted to the computational resources of the onboard computer. A novel dynamic look-ahead re-entry strategy is proposed, which activates when the robot exits a predefined lateral error band (δ=0.05 m) and interpolates a smooth reconnection trajectory based on a forward look-ahead point, ensuring gradual convergence and avoiding abrupt re-entry actions. Accuracy was evaluated through lateral and heading errors measured via geometric projection onto the nominal path, ensuring fair comparison. From these errors, RMSE, MAE, P95, and in-band percentage were computed as quantitative metrics. The framework was tested on real hardware at 50 Hz through 5 nominal experiments and 3 perturbed experiments. Perturbations consisted of externally imposed velocity commands at specific points along the path, while configuration parameters were systematically varied across trials, including the weight R, smoothing distance Lsmooth, and activation of the re-entry strategy. In nominal conditions, the best configuration (ID 2) achieved a lateral RMSE of 0.05 m, a heading RMSE of 0.06 rad, and maintained 68.8% of the trajectory within the validation band. Under perturbations, the proposed strategy substantially improved robustness. For instance, in experiment ID 6 the robot sustained a lateral RMSE of 0.12 m and preserved 51.4% in-band, outperforming MPC without re-entry, which suffered from larger deviations and slower recoveries. The results confirm that integrating MPC with the proposed re-entry strategy enhances both accuracy and robustness in DDMR trajectory tracking. By combining predictive control with a spatially grounded recovery mechanism, the approach ensures consistent performance in challenging scenarios, underscoring its relevance for reliable mobile robot navigation in uncertain environments.

31 December 2023 in Revista Científica Arbitrada Multidisciplinaria PENTACIENCIAS
Verified
Journal Article
Open access
PDF file
LALuis David Quezada Asipuela
Luis David Quezada Asipuela
LPLuis Mauricio Ipiales Portilla
Luis Mauricio Ipiales Portilla
KBKléber Javier Barba Barba
Kléber Javier Barba Barba
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
En el Ecuador, gran parte de los componentes estructurales de las construcciones y edificaciones no cuentan con mecanismos efectivos para protección frente a incendios. Por su lado, el sistema de construcción en Steel Framing, que es uno de los más beneficiosos e innovadores porque brinda alta resistencia térmica, acústica e ignífuga, además de ser liviana y de rápida implementación y amigable con el medioambiente, carece de credibilidad en el mercado nacional y local, teniendo una baja demanda y estando limitado al alcance de los consumidores, los cuales son principalmente profesionales involucrados en proyectos inmobiliarios. En esta investigación descriptiva, con alcance exploratorio y enfoque mixto, se compara la diferencia entre construcciones de Steel Framing y construcciones tradicionales en su exposición al fuego; se analiza la resistencia al fuego de los distintos materiales empleados en el sistema Steel Framing, y su respuesta en conjunto durante un incendio y se identifican las variaciones en las propiedades mecánicas del acero galvanizado y sus revestimientos bajo condiciones de exposición al fuego. Se concluye con que este tipo de construcciones tienen un menor riesgo frente a incendios y una mayor resistencia al fuego frente a los sistemas de construcción tradicional, favoreciendo la seguridad de sus ocupantes.

4 September 2023 in Revista Social Fronteriza
Verified
Journal Article
Open access
PDF file
JTJaime Leonardo Almache Tenorio
Jaime Leonardo Almache Tenorio
MPMiguel Fabricio Proaño Paredes
Miguel Fabricio Proaño Paredes
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
La palma africana (Elaeis guineensis) es una de las principales fuentes de aceite vegetal en el mundo, y su cultivo tiene una gran importancia económica y social en Ecuador. La extracción del aceite rojo de palma africana se realiza mediante diversos métodos, entre ellos, el uso de tornillos de extracción. Esta tesis se enfoca en el diseño y simulación de un tornillo específico para la extracción eficiente y sostenible del aceite rojo de palma africana en el contexto ecuatoriano. El diseño se basa en el análisis de las propiedades del material y las condiciones de operación locales, así como en aspectos técnicos, operativos y ambientales para optimizar el proceso de extracción y contribuir al desarrollo de una industria aceitera más sostenible.

18 March 2025 in Revista Científica Arbitrada Multidisciplinaria PENTACIENCIAS
Verified
Journal Article
Open access
PDF file
AAAngel Ivan Ordoñez Abril
Angel Ivan Ordoñez Abril
LDLuis David Mantilla Delgado
Luis David Mantilla Delgado
KBKleber Javier Barba Barba
Kleber Javier Barba Barba
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
Esta investigación analiza el uso de revestimientos eficientes en estructuras metálicas en ambientes corrosivos, con el objetivo de optimizar su protección y prolongar su vida útil. Se emplea un enfoque mixto, combinando análisis cuantitativos (ensayos de laboratorio) y cualitativos (evaluación de propiedades y desafíos). La metodología incluye una revisión exhaustiva de literatura académica, como tesis, artículos científicos y normativas internacionales, para identificar tendencias y mejores prácticas en protección anticorrosiva. Los principales hallazgos destacan que los revestimientos basados en resinas epóxicas, poliuretanos y sistemas multicapa (con capas ricas en zinc, intermedias epóxicas y acabados de poliuretano) ofrecen un desempeño superior. Estos sistemas presentan alta resistencia a la corrosión, durabilidad en condiciones agresivas y excelente adherencia a superficies metálicas, incluso en entornos con humedad y químicos. Se concluye que la elección del revestimiento debe alinearse con las condiciones operativas y las propiedades del sustrato, subrayando la importancia de un enfoque integral en su selección y aplicación. Este estudio proporciona una base sólida para futuras investigaciones y aplicaciones industriales.

5 July 2024 in Revista Social Fronteriza
Verified
Journal Article
Open access
PDF file
MRMichael Steven Pinargote Rodríguez
Michael Steven Pinargote Rodríguez
KPKevin Andrés Andrade Patiño
Kevin Andrés Andrade Patiño
SSSantiago Bustamante Sanchez
Santiago Bustamante Sanchez
Este trabajo investigativo tiene como objetivo principal el análisis y la mejora de técnicas para la elaboración de moldes de estampado mecánico. El proyecto se enfoca en el desarrollo de nuevas metodologías de procesamiento que cumplan con los estándares de calidad exigidos por los mercados activos, con especial atención al sector automotriz, que presenta una alta demanda para estos productos. La investigación explora las metodologías y tecnologías actuales en la producción de moldes para la industria metalmecánica en Ecuador, destacando la importancia de la tecnología de Control Numérico por Computadora (CNC). Este proceso es crucial para la producción en serie de moldes de alta precisión. El estudio también examina las limitaciones tecnológicas actuales y propone mejoras para aumentar la competitividad del sector tanto a nivel nacional como internacional. En Ecuador, se identifican desafíos significativos, incluyendo la escasez de maquinaria moderna y especializada, que limita la eficiencia y el desarrollo en la producción de moldes de estampado mecánico. El proyecto busca superar estos desafíos mediante la optimización de técnicas y procesos en la industria.