For the last several decades, energy harvesters based on piezoelectricity from mechanical vibration have emerged as very promising devices that are being explored extensively for their functionality in energy technologies. In this paper, a series of flexible lead-free BaZr_0.2Ti_0.8O₃ (BZT)/PVDF and lead-based PbZr_0.52Ti_0.48O₃ (PZT)/PVDF piezocomposites with variable filler content up to 50 vol% were prepared by a hot pressing method. The structure and morphology of the BZT and PZT powders, as well as the distribution of the piezo-active filler in the obtained flexible films were characterized by XRD and SEM analysis. In addition, the remnant polarization (P_r) and leakage current were also investigated to evaluate the breakdown strength in both types of flexible films. The calculations of storage energies and output voltage obtained for the investigated materials revealed an increasing trend with an increasing amount of BZT and PZT active phases. The maximum storage energy of 0.42 J/cm³ (and energy efficiency of 40.7 %) was obtained for the PZT–PVDF (40–60) films, while the maximum output voltage of about 10 V (~10 μA) was obtained for the PZT–PVDF (50–50) flexible film. In addition, a comparison between the properties of the lead-based and lead-free flexible films, as well as the potential use of these films as energy storage and energy harvesting systems were analyzed.

This study investigates the regeneration, reuse, stabilization, and environmental safety of Fe–Mn polymer nanocomposites for arsenic (As) removal and their environmental safety. The regeneration performance of Fe–Mn polymer nanocomposites (PS-FMBO) used in this study was assessed through batch adsorption–desorption cycles using various eluents, including NaOH, NaOH–NaCl, and NaOH–NaOCl mixtures. The results demonstrated that 0.1 M NaOH yielded the best regeneration performance, maintaining higher adsorption efficiency over multiple cycles. Stronger desorption agents caused a significant decline in removal efficiency due to possible structural degradation of the PS-FMBO nanocomposite, suggesting that aggressive desorption conditions could compromise its long-term effectiveness. The stabilization of PS-FMBO with cement and quicklime was evaluated for immobilizing As, iron (Fe), and manganese (Mn). Leaching tests indicated that the composites effectively immobilized these contaminants, with minimal leaching observed even after prolonged aging, ensuring compliance with environmental safety regulations. Furthermore, chitosan-based foams were analyzed for their chemical stability, with leaching tests confirming low concentrations of As, Fe, and Mn, even under aggressive conditions, further reinforcing the material’s safety and environmental compliance. These findings underscore the potential of PS-FMBO composites and chitosan-based foams as sustainable materials for hazardous waste management and eco-friendly construction applications. Their ability to immobilize contaminants while maintaining structural integrity highlights their practical significance in reducing environmental pollution and advancing circular economy principles.

The field of ferroelectric materials is continuously expanding towards new realms of extraordinary properties and applications