As sub-GHz wireless Internet of Things (IoT) sensor networks set the stage for long-range, low-data-rate communication, wireless technologies such as LoRa and SigFox receive a lot of attention. They aim to offer a reliable means of communication for an extensive amount of monitoring and management applications. Recently, several studies have been conducted on their performance, but none of these feature a high dynamic range in terms of channel measurement. In this contribution an autonomous, low-power, LoRa-compatible wireless sensor node is presented. The main uses for this node are situated in LoRa channel characterization and link performance analysis. By applying stepped attenuators controlled by a dynamic attenuation adjustment algorithm, this node provides a dynamic range that is significantly larger than what is provided by commercially available LoRa modules. The node was calibrated in order to obtain accurate measurements of the received signal power in dBm. In this paper, both the hardware design as well as some verification measurements are discussed, unveiling various LoRa-related research applications and opportunities.
When aiming for the wider deployment of low-power sensor networks, the use of sub-GHz frequency bands shows a lot of promise in terms of robustness and minimal power consumption. Yet, when deploying such sensor networks over larger areas, the link quality can be impacted by a host of factors. Therefore, this contribution demonstrates the performance of several links in a real-world, research-oriented sensor network deployed in a (sub)urban environment. Several link characteristics are presented and analysed, exposing frequent signal deterioration and, more rarely, signal strength enhancement along certain long-distance wireless links. A connection is made between received power levels and seasonal weather changes and events. The irregular link performance presented in this paper is found to be genuinely disruptive when pushing sensor-networks to their limits in terms of range and power use. This work aims to give an indication of the severity of these effects in order to enable the design of truly reliable sensor networks.
16 July 2020 in IEEE Transactions on Antennas and Propagation
The LoRa standard is currently widely employed for low-power long-range wireless sensor networks at sub-GHz frequency bands. The longer wavelengths associated with sub-GHz technology provide excellent radiowave propagation characteristics, yielding much larger coverage compared to higher frequency bands. In the case of wearable sensors, the 868 MHz band can be covered by textile substrate-integrated-waveguide antennas of a convenient size. In body-centric communication systems, front-to-back diversity is an important asset to mitigate the shadowing of the antennas by the presence of the human body. This paper describes a diversity textile-antenna-based LoRa platform with integrated transceivers. Outdoor measurement campaigns are conducted to assess the performance of the wearable LoRa nodes with front-to-back diversity in an urban radio propagation environment at walking and cycling speeds. These experiments prove that large ranges of 1.5 km can easily and reliably be achieved for off-body LoRa communication links. The results demonstrate a significant performance improvement in terms of packet loss in NLoS situations when comparing single-receiver performance to different spacial receiver diversity applications. Additionally, link budget increases up to 5.5 dB are seen, owing to the realized diversity gain.
In recent years, LoRa has been deployed in countless Internet of Things (IoT) applications across the globe. However, as LoRa is a proprietary technology, research into its physical-layer performance has been challenging. Implementing LoRa on software-defined radio (SDR) platforms yields valuable insight into the physical layer of the LoRa standard and paves the way for improvements in packet reception capabilities for LoRa receivers. This article presents an independently developed packet reception algorithm, which drastically improves the physical performance of LoRa communication links. The advanced signal presence detection, synchronization, and symbol detection strategies are shown to significantly increase packet reception ratios in extremely adverse noise conditions. Multiple algorithm variations are presented and compared in terms of bit error rate (BER) performance and computational cost. In comparison to a theoretical system with perfect channel state information, the simulated BER performance of the best performing algorithm only requires an increase of 1.6 dB in signal-to-noise ratio (SNR) to exhibit the same performance. Finally, SDR implementations of the algorithms exhibit average SNR performance gains up to 4.7 dB when compared to commercially available hardware.
Long-range, low-power wireless technologies such as LoRa have been shown to exhibit excellent performance when applied in body-centric wireless applications. However, the robustness of LoRa technology to Doppler spread has recently been called into question by a number of researchers. This paper evaluates the impact of static and dynamic Doppler shifts on a simulated LoRa symbol detector and two types of simulated LoRa receivers. The results are interpreted specifically for body-centric applications and confirm that, in most application environments, pure Doppler effects are unlikely to severely disrupt wireless communication, confirming previous research, which stated that the link deteriorations observed in a number of practical LoRa measurement campaigns would mainly be caused by multipath fading effects. Yet, dynamic Doppler shifts, which occur as a result of the relative acceleration between communicating nodes, are also shown to contribute to link degradation. This is especially so for higher LoRa spreading factors and larger packet sizes.