23 June 2022 in IEEE Transactions on Microwave Theory and Techniques
This article presents a novel 4 $\times$ 4 Butler matrix implemented in the grounded co-planar waveguide (GCPW) technology, compactly integrated with a highly efficient and broadband 1 $\times$ 4 air-filled substrate integrated waveguide (AFSIW) cavity-backed patch antenna array (AA), giving rise to a broad operational frequency range 23.75, 31 GHz (26.5%) covering the n257, n258, and n261 fifth-generation (5G) bands. Three novel quadrature hybrid couplers and two crossovers are designed and compared to obtain the optimal building blocks for the Butler matrix. Within each of the supported 5G bands, the measured excess insertion loss of the optimized Butler matrix remains smaller than 3.5 dB with a maximal amplitude imbalance of $\pm$ 0.9 dB. Isolation between input ports is higher than 16.4 dB. A maximal measured realized gain of 12.3 dBi is obtained for the Butler matrix with integrated 1 $\times$ 4 AA while ensuring a $-$ 3-dB beamwidth coverage of 110 $^\circ$ . The main beamsteering directions of $-$ 40 $^\circ$ , $-$ 14 $^\circ$ , 14 $^\circ$ , 40 $^\circ$ exhibit measured deviations that stay within $\pm$ 3 $^\circ$ . The fabricated Butler matrix with AA features a very compact footprint of 21.4 mm $\times$ 46.0 mm $\times$ 2 mm 2 $\lambda_0 \times$ 4.3 $\lambda_0 \times$ 0.2 $\lambda_0$ .
14 August 2006 in IEEE Transactions on Wireless Communications
We compare the maximum achievable common signal to interference and noise ratio (SINR) target level Kmax in the downlink of various code division multiple access (CDMA) systems with binary sequence sets. We derive an upper bound to Kmax for binary systems with symbol-aligned users, and we compare this upper bound to the value of Kmax for quasi-orthogonal sequences (QOS), Grassmannian signatures and binary Pados-Karystinos signatures. Secondly, we turn our attention to systems where the (binary) signatures of the users are displaced with respect to each other. In this context, we show that the value of Kmax of improved random O(rthogonal)CDMA/OCDMA (O/O) can further be increased as compared to the original improved. O/O system (with square-root cosine rolloff pulses) by an appropriate choice of the chip pulse. In addition to this, improved O/O systems with fixed signature set can achieve values of K max that are as high as those in the improved random O/O system, while not having the drawback of a spread on Kmax. Applying a steepest descent search to such a fixed improved O/O system, can result in a system with a binary signature set that has even higher values for Kmax well beyond the upper bound on Kmax for systems with aligned chip pulses
1 October 2021 in IEEE Internet of Things Journal
In recent years, LoRa has been deployed in countless Internet of Things (IoT) applications across the globe. However, as LoRa is a proprietary technology, research into its physical-layer performance has been challenging. Implementing LoRa on software-defined radio (SDR) platforms yields valuable insight into the physical layer of the LoRa standard and paves the way for improvements in packet reception capabilities for LoRa receivers. This article presents an independently developed packet reception algorithm, which drastically improves the physical performance of LoRa communication links. The advanced signal presence detection, synchronization, and symbol detection strategies are shown to significantly increase packet reception ratios in extremely adverse noise conditions. Multiple algorithm variations are presented and compared in terms of bit error rate (BER) performance and computational cost. In comparison to a theoretical system with perfect channel state information, the simulated BER performance of the best performing algorithm only requires an increase of 1.6 dB in signal-to-noise ratio (SNR) to exhibit the same performance. Finally, SDR implementations of the algorithms exhibit average SNR performance gains up to 4.7 dB when compared to commercially available hardware.
1 February 1995 in IEEE Transactions on Communications
21 May 1992 in Electronics Letters
Fully digital receivers operate on samples of the received signal, taken by a fixed clock. Signal samples at instants of maximum eye opening are obtained by interpolating between available samples. In the Letter, a second-order (quadratic) interpolator is optimised for minimum bit error rate (BER) degradation, when operating on a bandlimited direct-sequence spread-spectrum (DS/SS) signal.