Inadequate domestic wastewater treatment remains a major environmental challenge due to the discharge of nitrogen compounds that originate primarily from human excreta, food residues, and household products, and are commonly present as ammonium and organic nitrogen. During biological processes, these compounds are converted to nitrite and nitrate, which are highly soluble and can easily migrate through soils, contaminating groundwater and posing risks to public health. Although Moving Bed Biofilm Reactors (MBBRs) are widely used for nitrogen removal, developing biocarriers with controllable geometry and optimized surface area for enhanced biofilm growth remains a challenge. This study aimed to design and fabricate gyroid-structured biocarriers using additive manufacturing (3D printing) from polylactic acid (PLA), acrylonitrile–butadiene–styrene (ABS), and polypropylene (PP), and to evaluate their performance in wastewater treatment for nitrogen removal. Bench-scale experiments showed significant chemical oxygen demand (COD) removal for all materials, with ABS and PP promoting the most stable biofilm formation. Pilot-scale tests with PP gyroid biocarriers achieved removal efficiencies of up to 87% for biochemical oxygen demand (BOD), 87% for ammonia, and 97% for nitrate. These results demonstrate that 3D-printed gyroid biocarriers provide a tunable geometry that enhances surface area and improves biological nitrogen removal in domestic wastewater treatment.
3D printing refers to the process of producing physical objects from a computer model. With the ongoing advancements in technology, the introduction of printers equipped with fused granular fabrication (FGF) technology has significantly broadened the range of usable materials. This innovation also enables the mixing of materials during the printing process, thereby reducing costs associated with manufacturing mixtures and blends. This article aims to evaluate the mechanical properties of blends of polypropylene (PP) with acrylonitrile butadiene styrene (ABS) manufactured in a printer with FGF technology. Tensile and compressive strength, impact resistance, shore D hardness and hardness were performed. The materials were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetry (TG). The results of the pure material and the blends were compared. For mechanical performance, there was no improvement in the parameters evaluated. The blends exhibited more ductile failure behavior than for the pure materials. Despite the easier manufacturing and reduction of thermal processes, the manufacture of PP and ABS blends did not present advantages other than the increase in the degree of crystallization of the PP matrix.