The OLIVE (On Line Interactive Validation Exercise) platform is dedicated to the validation of global biophysical products such as LAI (Leaf Area Index) and FAPAR (Fraction of Absorbed Photosynthetically Active Radiation). It was developed under the framework of the CEOS (Committee on Earth Observation Satellites) Land Product Validation (LPV) sub-group. OLIVE has three main objectives: (i) to provide a consistent and centralized information on the definition of the biophysical variables, as well as a description of the main available products and their performances (ii) to provide transparency and traceability by an online validation procedure compliant with the CEOS LPV and QA4EO (Quality Assurance for Earth Observation) recommendations (iii) and finally, to provide a tool to benchmark new products, update product validation results and host new ground measurement sites for accuracy assessment. The functionalities and algorithms of OLIVE are described to provide full transparency of its procedures to the community. The validation process and typical results are illustrated for three FAPAR products: GEOV1 (VEGETATION sensor), MGVIo (MERIS sensor) and MODIS collection 5 FPAR. OLIVE is available on the European Space Agency CAL/VAL portal), including full documentation, validation exercise results, and product extracts.

Drought in Australia has widespread impacts on agriculture and ecosystems. Satellite-based Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) has great potential to monitor and assess drought impacts on vegetation greenness and health. Various FAPAR products based on satellite observations have been generated and made available to the public. However, differences remain among these datasets due to different retrieval methodologies and assumptions. The Quality Assurance for Essential Climate Variables (QA4ECV) project recently developed a quality assurance framework to provide understandable and traceable quality information for Essential Climate Variables (ECVs). The QA4ECV FAPAR is one of these ECVs. The aim of this study is to investigate the capability of QA4ECV FAPAR for drought monitoring in Australia. Through spatial and temporal comparison and correlation analysis with widely used Moderate Resolution Imaging Spectroradiometer (MODIS), Satellite Pour l’Observation de la Terre (SPOT)/PROBA-V FAPAR generated by Copernicus Global Land Service (CGLS), and the Standardized Precipitation Evapotranspiration Index (SPEI) drought index, as well as the European Space Agency’s Climate Change Initiative (ESA CCI) soil moisture, the study shows that the QA4ECV FAPAR can support agricultural drought monitoring and assessment in Australia. The traceable and reliable uncertainties associated with the QA4ECV FAPAR provide valuable information for applications that use the QA4ECV FAPAR dataset in the future.

Data from Earth observation (EO) satellites are increasingly used to monitor the environment, understand variability and change, inform evaluations of climate model forecasts, and manage natural resources. Policymakers are progressively relying on the information derived from these datasets to make decisions on mitigating and adapting to climate change. These decisions should be evidence based, which requires confidence in derived products, as well as the reference measurements used to calibrate, validate, or inform product development. In support of the European Union’s Earth Observation Programmes Copernicus Climate Change Service (C3S), the Quality Assurance for Essential Climate Variables (QA4ECV) project fulfilled a gap in the delivery of climate quality satellite-derived datasets, by prototyping a generic system for the implementation and evaluation of quality assurance (QA) measures for satellite-derived ECV climate data record products. The project demonstrated the QA system on six new long-term, climate quality ECV data records for surface albedo, leaf area index (LAI), fraction of absorbed photosynthetically active radiation (FAPAR), nitrogen dioxide (NO₂), formaldehyde (HCHO), and carbon monoxide (CO). The provision of standardised QA information provides data users with evidence-based confidence in the products and enables judgement on the fitness-for-purpose of various ECV data products and their specific applications.

The Fraction of Absorbed Photosynthetically-Active Radiation (FAPAR) is an important parameter in climate and carbon cycle studies. In this paper, we use the Earth Observation Land Data Assimilation System (EO-LDAS) framework to retrieve FAPAR from observations of directional surface reflectance measurements from the Multi-angle Imaging SpectroRadiometer(MISR) instrument. The procedure works by interpreting the reflectance data via the semi-discrete Radiative Transfer (RT) model, supported by a prior parameter distribution and a dynamic regularisation model and resulting in an inference of land surface parameters, such as effective Leaf Area Index (LAI), leaf chlorophyll concentration and fraction of senescent leaves, with full uncertainty quantification. The method is demonstrated over three agricultural FLUXNET sites, and the EO-LDAS results are compared with eight years of in situ measurements of FAPAR and LAI, resulting in a total of 24 site years. We additionally compare three other widely-used EO FAPAR products, namely the MEdium Resolution Imaging Spectrometer (MERIS) Full Resolution, the MISR High Resolution (HR) Joint Research Centre Two-stream Inversion Package (JRC-TIP) and MODIS MCD15 FAPAR products. The EO-LDAS MISR FAPAR retrievals show a high correlation with the ground measurements ( $r^2$ > 0.8), as well as the lowest average $RMSE$ (0.14), in line with the MODIS product. As the EO-LDAS solution is effectively interpolated, if only measurements that are coincident with MISR observations are considered, the correlation increases ( $r^2$ > 0.85); the $RMSE$ is lower by 4–5%; and the bias is 2% and 7%. The EO-LDAS MISR LAI estimates show a strong correlation with ground-based LAI (average $r^2$ = 0.76), but an underestimate of LAI for optically-thick canopies due to saturation (average $RMSE$ = 2.23). These results suggest that the EO-LDAS approach is successful in retrieving both FAPAR and other land surface parameters. A large part of this success is based on the use of a dynamic regularisation model that counteracts the poor temporal sampling from the MISR instrument.

Digital hemispherical photography (DHP) is widely used to derive forest biophysical variables including leaf, plant, and green area index (LAI, PAI and GAI), the fraction of intercepted photosynthetically active radiation (FIPAR), and the fraction of vegetation cover (FCOVER). However, the majority of software packages for processing DHP data are based on a graphical user interface, making programmatic analysis difficult. Meanwhile, few natively support analysis of RAW image formats, while none incorporate the propagation or provision of uncertainties. To address these limitations, we present HemiPy, an open‐source Python module for deriving forest biophysical variables and uncertainties from DHP images in an automated manner. We assess HemiPy using simulated hemispherical images, in addition to multiannual time‐series and litterfall data from several forested National Ecological Observatory Network (NEON) sites, as well as comparison against the CAN‐EYE software package. Multiannual time‐series of PAI, FIPAR and FCOVER demonstrate HemiPy's outputs realistically represent expected temporal patterns. Comparison against litterfall data reveals reasonable accuracies are achievable, with RMSE values close to the error of ~1 unit typically attributed to optical LAI measurement approaches. HemiPy's PAI, FIPAR and FCOVER outputs demonstrate good agreement with CAN‐EYE. Consistent with previous studies, when compared to simulated hemispherical images, better agreement is observed for PAI derived using gap fraction near the hinge angle of 57.5° only, as opposed to values derived using gap fraction over a wider range of zenith angles. HemiPy should prove a useful tool for processing DHP images, and its open‐source nature means that it can be adopted, extended and further refined by the user community.