A new nano-soil stabilizer (N-MBER, Nanometer Material Becoming Earth into Rock) material was developed in this research by using the high activity and ultrafine properties of nano-SiO₂ (NS), which were able to improve the properties of cement-based soil stabilizer and had broad application prospects. The results showed that (1) the strength of N-MBER obeyed a compound function relation with curing period and additive amount of NS. The relationship between strength and curing period obeyed an exponential function when the additive amount was constant. The strength and additive amount were a power function when the curing period was fixed. The compressive strength of N-MBER increased by more than 15% compared with MBER at day 28 of the curing period, and 50% compared with grade 32.5 cement. (2) The pozzolanic catalytic activity of NS significantly increased the amount of calcium silicate hydrate gel (C–S–H) in the N-MBER colloid. NS was also able to make the distribution of the network structure of colloidal space more uniform and improved the fractal dimension of particles by 0.05. The above results provide theoretical data for exploring the mechanism of soil stabilizer strength growth and for promoting the application of solid waste utilization.

Soil stabilizers are environmentally friendly engineering materials that enable efficient utilization of local soil-water resources. The application of nano-modified stabilizers to reinforce loess can effectively enhance the microscopic interfacial structure and improve the macroscopic mechanical properties of soil. This study employed nano-SiO₂ and nano-CaCO₃ to modify cement-based soil stabilizers, investigating the enhancement mechanisms of nanomaterials on stabilizer performance through compressive and flexural strength tests combined with microscopic analyses, including SEM, XRD, and FT-IR. The key findings are as follows: (1) Comparative analysis of mortar specimen strength under identical conditions revealed that nano-SiO₂ generally demonstrated superior mechanical enhancement compared to nano-CaCO₃ across various curing ages (1–3% dosage). At 1% dosage, the compressive strength of both modified stabilizers increased with curing duration. Early-stage strength differences (3 days) remained below 3% but showed a significant divergence with prolonged curing: nano-SiO₂ groups exhibited 10.3%, 11.3%, and 7.2% higher compressive strengths than nano-CaCO₃ at 7, 14, and 28 days, respectively. (2) The strength enhancement effect of nano-SiO₂ on MBER soil stabilizer followed a parabolic trend within 1–3% dosage range, peaking at 2.5% with over 15% strength improvement. (3) The exceptional performance of nano-SiO₂ originates from its high reactivity and ultrafine particle characteristics, which induce nano-catalytic hydration effects and demonstrate strong pozzolanic activity. These properties accelerate hydration processes while promoting the formation of interlocking C-S-H gels and hexagonal prismatic AFt crystals, ultimately creating a robust three-dimensional network that optimizes interfacial structure and significantly enhances strength characteristics across curing periods. These findings provide scientific support for the performance optimization of soil stabilizers and their sustainable applications in eco-construction practices.

Organic amendment has proven to improve soil quality and crop production, in addition to reduce resource waste. However, the effect of organic amendment on soil water-stable aggregates and soil organic carbon is unclear. A two-year field experiment with four organic amendment treatments, biochar, organic fertilizer, microbial agents and polyacrylamide (PAM), was conducted to investigate the effect of different soil organic amendments on Loess Plateau. The results revealed that organic amendments significantly influenced the mean weight diameter (MWD) and geometric mean diameter (GMD) of water-stable aggregates, particularly in the case of PAM treatment. The MWD and GMD values increased significantly by 33.7% and 29.8% in the PAM treatment. The proportion of macroaggregates (2-0.25 mm) showed a remarkable 52.9% increase compared to the control (CK) treatment in the PAM-treated soil. Biochar-amended treatments increased soil organic carbon (SOC) in all aggregate fractions compared to CK treatment. Soil organic amendments also decreased soil bulk density and increased total nitrogen (TN) and available phosphorus (AP). Compared to CK treatment, the maize yields in the organic fertilizer and biochar treated soil increased by 19.8 and 30.3%, respectively. These findings suggest that biochar and PAM amendments are particularly suitable for loessal soil in arid and semi-arid regions

The stress–strain constitutive model under uniaxial compression is a basic element and important characterization method for determining physical and mechanical properties in cement-based materials research. In this study, a stress–strain constitutive model under uniaxial compression was established, which was based on a new nano-stabilized soil (NSS) through typical mechanical tests and constitutive relationship research. The results indicate that the unconfined compressive strength (UCS) of the nano-stabilized soil was enhanced with the increase in curing period and nano-stabilizer dosage, and that the strength growth rate reaches the maximum at a 12% dosage in the tested samples. The UCS of NSS under a 12% dosage is about 10~15% higher than that of ordinary stabilized soil (SS) without nano doping, and 25~40% higher compared with grade 42.5 cement-soil. The established constitutive model could accurately describe the linear-elastic and elastic-plastic deformation characteristics of NSS under uniaxial compression, which will be conducive to revealing the curve variation law of the stress–strain process. The research results could provide scientific support for the theoretical innovation and engineering application of green environmental protection materials.

As a non-precipitation water source, dew is important for plant and animal survival and crop production in arid and water-scarce areas. This study assessed the amount of dew in a dry zone in a long-term (2016 to 2022) field observation experiment at the Ansai Experimental Station, a typical loess hilly area in China. Dew primarily occurred in summer and autumn, with a frequency of >50%. The average annual dew amount was 29.20 mm, with an average annual rainfall of 641.8 mm. The average annual dew-to-rain ratio was 4.58%, and the average annual number of dew days was 143.6 d/a. The surface soil moisture content increased by approximately 1.02% with increasing dew amounts. The change in the soil moisture at a 5 cm depth was 0.14% on average and lagged substantially by 1 h. Using the Beysens model, the annual estimated and measured dew amounts in 2022 were 25.27 and 29.84 mm, respectively, and the annual normalized root mean square deviation (NRMSD) was 0.17. Thus, the Beysens model evaluated the dew amount in the study area well at the monthly and annual scales. The quantification of dew resources can provide support for the development, utilization, and management of limited water resources in arid areas, promoting more accurate decision-making for the sustainable development of water resources in the future.

With the increasing demand for soil modification technologies in the field of civil engineering, this study employed cement-stabilized soil and MBER (Material Becoming Earth into Rock) stabilized soil as controls to investigate the modification effects of an N-MBER (nanosilica reinforced MBER) stabilizer on the mechanical properties and microstructure of loess. The mechanical and water stability characteristics of N-MBER-stabilized loess under varying moisture contents and compaction degrees were analyzed through unconfined compressive strength (UCS) tests, softening coefficient tests, falling-head permeability tests, and wet–dry cycle tests. Combined with scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and nuclear magnetic resonance (NMR) techniques, the underlying mechanism of the N-MBER stabilizer in loess stabilization was thoroughly revealed. The results indicate that the N-MBER stabilizer significantly enhances the UCS and softening coefficient of loess. Particularly, under conditions of 28-day curing, a moisture content of 16%, and a compaction degree of 1, the compressive strength achieves a local optimum value of 3.68 MPa. Compared to soils stabilized with MBER stabilizers and cement stabilizers, the N-MBER-stabilized loess exhibits superior water resistance and microstructural density, with a significant reduction in the proportion of pore defects. Specifically, after five wet–dry cycles at a curing age of 28 days, the strength loss rates for MBER-stabilized soil and cement-stabilized soil were 24.4% and 27.54%, respectively, while that for N-MBER-stabilized soil was 18.23%, demonstrating its enhanced water resistance. Additionally, compared to cement-stabilized soil, the N-MBER-stabilized soil exhibited a 21.63% reduction in total pore number, with a 41.64% reduction specifically in large pores. The extremely small particle size and large specific surface area of the nanomaterial enable more effective interactions with soil particles, promoting hydration reactions. The resulting ettringite (AFt) and three-dimensional networked C-S-H gel tightly interweave with soil particles, forming a stable cemented structure. Compared to traditional concrete roads, stabilized soil roads enable the utilization of locally available materials and demonstrate a significant cost advantage. This study provides theoretical support and experimental evidence for the application of nanomaterials in loess improvement engineering.