Porous copper oxides/reduced graphene oxide (CuO-Cu2O/rGO) microspheres composite was first prepared by a simple and environmentally friendly one-step hydrothermal method. The influences of graphene oxide (GO) on the ratio of CuO and Cu2O and the corresponding electrochemical performance of the composite were investigated systematically. It was found that when the ratio of CuO and Cu2O is about 1:5 by controlling GO adding amount, the composite exhibits excellent electrochemical performance, such as high specific capacitance (470 F·g−1 at a current density of 1 A·g−1), excellent rate capability (85.9% of capacity retention as current density increases from 1 to 10 A·g−1) and long cycle stability (81.3% of capacity retention after 5000 cycles at a current density of 1 A·g−1). Therefore, the porous high-performance CuO–Cu2O/rGO microspheres composite has a great potential for supercapacitor applications.
24 May 2023 in Journal of Materials Science: Materials in Electronics
MOFs-derived magnetic carbon-based composites are considered to be valuable materials for the design of high-performance microwave absorbents. Regulating phase structures and introducing mixed-valence states within the composites is a promising strategy to enhance their charge transfer properties, resulting in improved microwave absorption performance. In this study, iron oxide components show a temperature-dependent phase evolution process (α-Fe2O3→Fe3O4→Fe3O4/FeO), during which the valence states of iron ions are regulated. The tunable phases modulate the magnetic Fe3O4 component, resulting in enhanced magnetic loss. The changed valence states affect the polarization relaxation by adjusting the electronic structure and tune the electron scattering by introducing defects, leading to enhanced dielectric loss. The microwave absorption properties of iron oxide@carbon composites display phase- and valence state-dependent characteristics. Especially, Fe3O4@C composites exhibit superior microwave absorption properties, ascribed to the improved magnetic/dielectric losses induced by good impedance matching and strong microwave attenuation capacity. The minimum reflection loss of Fe3O4@C composites reaches −73.14 dB at 10.35 GHz with an effective absorption bandwidth of 4.9 GHz (7.69–12.59 GHz) when the absorber thickness is 2.31 mm. This work provides new insights into the adjustment of electromagnetic parameters and microwave absorption properties by regulating the phase and valence state.