In the present work, the properties of graphene-nanoplates/aluminum (GNPs/Al) composites with a heterogeneous matrix design were investigated. The advantage of the heterogeneous matrix was investigated by the finite element method. Then, 0.6 wt.% (GNPs/6061Al)/2024Al (heterogeneous matrix) and 0.6 wt.% GNPs/6061Al composites were prepared by ball milling, pressure infiltration technology, and hot extrusion. The aggregation of GNPs was eliminated and the interlayer slide of GNPs was observed. Mechanical property test results show that the mechanical properties of the heterogeneous matrix composite are better than that of a homogeneous matrix composite, including strength, elastic modulus, and plasticity. It is assumed that the heterogeneous matrix design enhances the non-uniform stress field during the deformation treatment. This improves the dispersion of GNPs, grain refinement, and produces the few-layer graphene (FLG), thus enhancing the strengthening effect of GNPs. Meanwhile, heterogeneous matrix design is thought to introduce more hardening mechanisms to increase the plasticity of materials and improve the intrinsic trade-off of strength and toughness.

The stability of diamond/aluminum composite is of significant importance for its extensive application. In this paper, the interface of diamond/aluminum composite was modified by adding nanoscale W coating on diamond surface. We evaluated the corrosion rate of nanoscale W-coated and uncoated diamond/aluminum composite by a full immersion test and polarization curve test and clarified the corrosion products and corrosion mechanism of the composite. The introduction of W nanoscale coating effectively reduces the corrosion rate of the diamond/aluminum composite. After corrosion, the bending strength and thermal conductivity of the nanoscale W-coated diamond/aluminum composite are considerably higher than those of the uncoated diamond/aluminum composite. The corrosion loss of the material is mainly related to the hydrolysis of the interface product Al₄C₃, accompanied by the corrosion of the matrix aluminum. Our work provides guidance for improving the life of electronic devices in corrosive environments.

Nanomaterials play an important role in metal matrix composites (MMC). In this study, 3.0 wt.%, 6.0 wt.%, and 9.0 wt.% nano-AlN-particles-reinforced AA6061 (nano-AlN/AA6061) composites were successfully prepared by pressure infiltration technique and then hot extruded (HE) at 500 °C. The microstructural characterization of the composites after HE show that the grain structure of the Al matrix is significantly refined, varying from 2 to 20 μm down to 1 to 3 μm. Nano-AlN particles in the composites are agglomerated around the matrix, and the distribution of nano-AlN is improved after HE. The interface between AA6061 and nano-AlN is clean and smooth, without interface reaction products. The 3.0 wt.% nano-AlN/AA6061 composite shows an uppermost yield and supreme tensile strength of 333 MPa and 445 MPa, respectively. The results show that the deformation procedure of the composite is beneficial to the further dispersion of nano-AlN particles and improves the strength of nano-AlN/AA6061 composite. At the same time, the strengthening mechanism active in the composites was discussed.