In this work, an experimental investigation is conducted with the aim of optimizing the electrodeposition parameters for Ni-Al2O3 composite coatings using the Taguchi method. The presented research is structured into two complementary sections. The first segment investigates the characteristics of Ni and Ni-Al2O3 coatings, specifically Al2O3 particle incorporation and crystallinity variations, using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and hardness evaluation through micro-indentation testing. The second section uses statistical techniques, specifically Analysis of Variance (ANOVA) and signal-to-noise (S/N) ratio analysis, to determine which parameters have the most impact on the experimental results. ANOVA and the Response Surface Methodology (RSM) were used in a modeling technique to forecast and optimize the technical responses. Based on an L16 orthogonal design, sixteen tests were carried out to investigate the effects of several important variables, including agitation rate (200–350 rpm), deposition period (15–60 min), alumina concentration (10–25 g.L−1), and current density (2–5 A.dm−2). The conditions for optimizing microhardness (HV) and Al2O3 integration while limiting average crystallite size (ACS) were identified using the most suitable function. The obtained results reveal significant improvements in the composite coating’s properties, including a 164% increase in microhardness, a 400% rise in alumina incorporation, and a notable reduction in crystallite size, demonstrating the efficacy of the electrodeposition process and optimization strategy adopted.
1 January 2025 in Journal of Nano- and Electronic Physics
Journal of Nano- and Electronic Physics. Scientific journal. ISSN: 2077-6772. Journal abbreviation: J. Nano- Electron. Phys. No page charges. All articles are freely available on-line. Issued 4 times per year. Publisher: Sumy State University. (Sumy, Ukraine)