A distribution system is usually unbalanced due to its various loads types with different connection patterns. So phase balancing is taken into consideration in distribution networks. Rephasing is the most effective method for phase balancing of distribution networks but the distributed generation (DG) effect on distribution networks phase balancing is also considerable. In this paper, smart distribution feeder has got balanced by DG sizing and rephasing strategy simultaneously. This combination has a significant influence on network phase balancing in addition to the system cost reduction. The problem is investigated in the deterministic and stochastic frameworks. In the stochastic framework, uncertainty related to hourly wind power and load is modeled using a scenario-based method. After the generated scenarios reduction, fuzzy multiobjective phase balancing (rephasing and DG sizing) based on θ-modified bat algorithm (θ-MBA) is applied to each reduced scenario. Finally, the obtained results of phase balancing in these scenarios are aggregated. The results of stochastic phase balancing are more realistic than deterministic phase balancing.
Increasing emission concerns about greenhouse gases have led to an increasing tendency to use renewable energy sources (RERs) in the power system. Nevertheless, the probabilistic nature of RERs has led to an enhanced require to flexibility provision. Hence, it is necessary to implement a flexibility-based generation maintenance scheduling. For this purpose, it has used the flexibility index of the system in order to evaluate the flexibility of the power system. In flexibility studies, modeling and predicting the variability of renewable resources is important. In this paper, the uncertainties of wind are considered through forecasting by deep learning method in Python. Gas-fired power plants are one of the most important suppliers of flexibility in the supply-side. Therefore, the reliable operation of power system depends on the of natural gas availability. Furthermore, gas demand is subject to various uncertainties, especially in cold seasons, which will have significant effects on power system. in this paper, power-to-gas (P2G) technology as energy storages is modeled to mitigate the impact of wind output and gas demand uncertainty. Meanwhile, integrated natural gas and electricity demand response such as event-based and time-based model has been applied as a flexibility provision from demand-side point of view. In this paper, the objectives of reducing emission and costs, leveling the reserve margin and increasing flexibility are considered as the objectives of optimizing generation maintenance scheduling. In order to solve the multi-objective problem, the augmented Epsilon constraint method has been used. The proposed model has been implemented on a modified IEEE RTS 24 bus.
14 May 2020 in IET Generation, Transmission & Distribution
With the increasing penetration rate of renewable energy sources, variability impacts, aside from uncertainty, will increase the need for operational flexibility resources in power systems. Accordingly, in this study, flexibility provision from both generation and demand sides are considered in a day‐ahead scheduling problem. Fast start gas‐fired units, due to their agility in starting‐up and high ramping capabilities are considered as generation side flexibility providers. However, the normal operation of these units strictly depends on a secure gas supply through connected gas pipelines. Thus, gas‐supply uncertainty is considered in the proposed model to mimic the impacts of deviations in gas volume through pipelines. On the other hand, demand response programs (DRPs) with their specific characteristics are among powerful demand side flexibility providers. However, unlike the existing literature that considers a supplementary role for DRPs, this study introduces the main role for DRPs as flexibility providers through comprehensive modelling of versatile DRPs. The proposed day‐ahead scheduling problem is a multi‐resolution robust security constrained unit commitment that the robustness comes from the decision making against sub‐hourly gas‐supply uncertainty and wind power variability. The applicability of the proposed model is tested on both an 8‐bus and IEEE‐118‐bus standard test systems.
27 November 2023 in International Journal of Electrical Power & Energy Systems
The integration of energy efficiency programs and renewable resources in energy communities (EC) incorporating smart microgrids might be the future development of sustainable cities. Cooperation among EC with high penetration of renewable energy resources will support energy procurement. Mutual energy efficiency programs in EC associated with deploying renewable resources can guarantee sustainable development significantly. This paper proposes a new sustainability index (SI) influenced by the loss of load reduction while increasing the penetration of renewable energies. A multi‐objective optimization method is used to determine the optimal size and location of renewable resources incorporating energy efficiency programs. The objective functions, that is, the total cost and SI, are based upon social, economic, environmental, and technical (SEET) considerations. Since the outputs of renewable energies are uncertain, it may increase the loss of load probability. Therefore, this paper introduces a model that can handle the uncertainties of renewable energies. A new method so‐called adaptive multi‐objective crow search algorithm (AMCSA) is developed for the trade‐off between cost and sustainability in the optimization problem. The proposed methodology cannot only minimize the total cost in EC but also will maximize the SI. Simulation studies and results analysis indicates the effectiveness of the proposed methodology for the development of sustainability and renewable energies in the smart grid.
31 May 2018 in IET Generation, Transmission & Distribution
Conventional distribution network departs to the smart grid. The parking lot will have an important role in the smart grid as a distributed generation. Due to the output power of parking lots is uncertain, More accurate modeling of parking lot output power is necessary for the future of distribution network studies such as Distribution Network Expansion Planning (DNEP). In this paper, a systematic method based on the Z ‐number concept is utilized to represent the uncertainty of Vehicle to Grid's (V2G's) presence. In order to investigate the impact of V2Gs uncertainty on the DNEP, we proposed a Probabilistic–Possibilistic DNEP in the presence of V2Gs referred to as P‐PDNEPV2G. If the V2Gs historical data is incomplete, the proposed structure can significantly consider the effects of V2G on the DNEP. In P‐PDNEPV2G, parking lots output power is described as a probabilistic–possibilistic variable by Z ‐number method. The optimization of P‐PDNEPV2G is executed by the Non‐Dominated Sorting Genetic Algorithm (NSGA‐II). A 24‐bus test system and the real 20 kV distribution network of Ghale‐Ganj city of Kerman province in Iran are used to demonstrate the effectiveness of the proposed methodology. Eventually, several analyses are conducted to investigate the impact of probabilistic–possibilistic V2G model on the DNEP problem.