In the 1980s, studying the effect of neutron irradiation and temper embrittlement on structural materials for the fusion and fission programmes was a major challenge. In this context the development of small specimen test techniques began, allowing the characterization of structural materials for nuclear applications with small amounts of material. The small punch technique is of one these small specimen test approaches. It is widely used for the development and monitoring of structural materials, however there is currently no comprehensive international standard for small punch testing. An EN standard on small punch testing is currently being developed under the auspices of ECISS/TC101/WG1. Besides describing the apparatus, procedures, and specimens, it will include recommendations for the estimation of tensile, fracture and creep properties from small punch testing as well as machine readable formats for representing and transferring test data.
1 September 2018 in Research Papers Faculty of Materials Science and Technology Slovak University of Technology
Borated austenitic stainless steel is used in nuclear industry due to the high neutron absorption efficiency. The plasma, laser and electron beam welding experiments were used for the study of the weld joints microstructure. The microstructure changes caused by welding process were observed by light optical microscopy and transmission electron microscopy. The microstructural characterization and microchemical analysis showed significant changes of the phase composition in the weld metal mainly. The austenitic dendrites were surrounded by eutectics, which were the mixture of the M 2 (C,B) and M 23 (C,B) borocarbides, δ-ferrite and austenite.
The microstructural evolution and mechanical properties of WWER 440 steam generator steel GOST 22K after long-term operation were thoroughly examined in this study. The samples were taken directly from a steam generator using the small punch test method. The uniqueness of these samples lies in the fact that they were real operating materials used in a nuclear power plant with different years of operation. The microstructure was characterized using optical microscopy and transmission electron microscopy supplemented by selective electron diffraction and semi-quantitative chemical microanalysis. It was found that with the prolongation of the operation time of the steam generator, the density of carbides increased slightly, which was reflected in a decrease in the mean distance between particles, but these differences were very small, which indicates the microstructural stability of GOST 22K steel. The stability of this steel was also confirmed by measuring its mechanical properties, which changed only minimally depending on the years of operation. The tensile strength values were in the range of 508 to 579 MPa. In the case of the ductile-to-brittle transition temperature (DBTT), a slight increase was found after 6 years of operation. The DBTT did not change significantly with subsequent operation.